Abstract:As a promising treatment technology for wastewater, the promotion of membrane bioreactors (MBR) is restricted by biological fouling. Among the measures used to mitigate membrane fouling, the addition of powdered activated carbon (PAC) to MBRs has been recognized as an effective practice. However, the effects of PAC dosage on the performance of MBRs that treat highly biochemical influent from wastewater treatment plants remain unclear. In this study, by investigating the treatment of biochemical tailwater by PAC–MBRs, we thoroughly analyzed the effects of PAC dosage on the contamination removal efficiency, membrane operation cycles, sludge mixture properties, and microorganism distributions. The results indicated that the addition of PAC enhanced the removal efficiency of MBRs depending on the contaminant of interest. For example, the removal efficiency of total nitrogen can be boosted from 30 % to 60 % with PAC addition, while the removal efficiencies of total phosphorus were comparable with or without PAC addition. Furthermore, the application of PAC in MBRs can prolong the duration of membranes by suppressing biological fouling. This was supported by the decreased microbial products, reduced smaller solid particles, and stronger stability of sludge particles. PAC addition also boosts the proportion of Proteus and decreases the proportion of Bacteroides , which helps to improve the removal efficiencies of contaminants. Finally, among the PAC dosages tested in our study, 1.5 g/L PAC was proposed as the optimal candidate for treating highly biochemical influents. For example, the corresponding time for transmembrane pressure to reach 0.03 MPa was 19 d at 1.5 g/L PAC, while these periods were 7 and 14 d at dosages of 0 and 0.5 g/L, respectively. Overall, the findings of this study will aid in the selection of optimal dosages for other systems with different types of influents.

Impacts of Poly-Aluminum Chloride Addition on Activated Sludge and the Treatment Efficiency of SBR

Optimization and effect of powdered activated carbon addition on commingled chemical industrial wastewater treatment in a sequencing batch reactor

Understanding the effect of residual aluminum salt coagulant on activated sludge in sequencing batch reactor: Performance response, activity restoration and microbial community evolution

Effects of Polyaluminium Chloride Addition on Community Structures of Polyphosphate and Glycogen Accumulating Organisms in Biological Phosphorus Removal (BPR) Systems.

Cost analysis and effects of various coagulants used for sludge treatment at the full-scale wastewater treatment plant

Effects of powdered activated carbon dosage on the performance of membrane bioreactors treating biochemical tail water

Influence of powdered activated carbon addition on water quality, sludge properties, and microbial characteristics in the biological treatment of commingled industrial wastewater.

The Effects on Phosphorus Removal and Membrane Pollution by Adding PAC and Ca2+ into MBR under Different Dosing Methods

Experimental Research on Removal of Nitrogen and Phosphorus in Enhanced Sequencing Batch Reactor Activated Sludge Process

The Effects on Phosphorus Removal and Membrane Pollution by Adding PAC and Ca<sup>2+</sup> into MBR under Different Dosing Methods

Optimization of wastewater treatment by coupled membrane bioreactor (MBR) with powered activated carbon (PAC)

Powder activated carbon strengthening SBR for simultaneous nitrogen and phosphorus removal under limited aeration

Powdered activated carbon full-scale addition to the activated sludge reactor of a municipal wastewater treatment plant: Pharmaceutical compounds control and overall impact on the process

Experimental Study on Application of PAC Produced Electrochemically in Water and Wastewater Treatment

THE EFFECT ON ACTIVATED SLUDGE ACTIVITY OF COAGULANTS APPLIED IN CHEMICAL PHOSPHORUS REMOVAL

Effects of Poly Aluminum Chloride Dosing Positions on the Performance of A Pilot Scale Anoxic/Oxic-Membrane Bioreactor (A/o-Mbr)

Effects of the addition of polymeric aluminium on the performance of A/O-MBR

Powdered Activated Carbon - Membrane Bioreactor (PAC-MBR): Impacts of High PAC Concentration on Micropollutant Removal and Microbial Communities

Electrophoretic nature and evaluation of poly-aluminum-chloride-sulfate (PACS) as a coagulant for water and wastewater treatment.

Enhanced Chemical Oxygen Demand Removal in the Pre-Treatment of Sludge Wastewater by Coagulation

Effect of PAC Dosing Point on Ultrafiltration Combined with PAC and Coagulation Sedimentation