Abstract:A removal mechanism of chromate (Cr) by synthesized kaolin supported nanoscale zero-valent iron (K-nZVI) from aqueous solution is demonstrated. Parameters which potentially influenced the functioning of K-nZVI have been investigated as well. Based on the scanning electron microscopy, Fourier transform infrared spectroscopes, X-ray crystal powder diffraction and X-ray photoelectron spectroscopy identifications, we confirm that amorphous Fe-0 core/FexOy shell nZVI can be successfully loaded into the pores and cracks, and onto the surface of kaolin. Removal efficiency of Cr by K-nZVI decreased with increasing initial pH and Cr(VI) concentration, but increased while K-nZVI dosage increased. Humic acid and phosphate had similar dual impacts on chromium removal by K-nZVI, and the inhibitory effect was obvious at high concentrations in spite of their different reaction mechanisms. In contrast, high concentrations of sulfate and nitrate could advance the chromium removal. Adsorption isotherms indicate that the removal processes are endothermic. The data obtained can be better explained with Langmuir than Freundlich model. At the conditions of 318K and optimized pH 4.0, the maximum adsorption capacity was 33.39mgg(-1) illustrating that K-nZVI was effective for the removal of total Cr. The removal mechanism is proposed to divide into four phases, including: (1) aqueous Cr(VI) ions are captured on the surface of K-nZVI; (2) the captured Cr(VI) are partly reduced to Cr(III) accompanied by Fe-0 oxidizing to Fe2+; (3) part of oxidized Fe2+ continues to reduce Cr(VI); and (4) produced Cr(III), Fe2+, and Fe3+ are formed passivation layers on the K-nZVI surface which prevent further removal of chromium and result in redundant Fe-0.

Carbothermal Synthesis Of Activated Carbon-Supported Nano Zero Valent Iron: Effects Of Temperature, Characterization, And Reactivity

High dispersions of nano zero valent iron supported on biochar by one-step carbothermal synthesis and its application in chromate removal

Micro-electrolysis of Cr (VI) in the nanoscale zero-valent iron loaded activated carbon.

Sodium salt promoted the generation of nano zero valent iron by carbothermal reduction: For activating peroxydisulfate to degrade antibiotic

Comprehensive study on the removal of chromate from aqueous solution by synthesized kaolin supported nanoscale zero-valent iron

In Situ Carbothermal Synthesis of Nanoscale Zero‐Valent Iron Functionalized Porous Carbon from Metal–Organic Frameworks for Efficient Detoxification of Chromium(VI)

Kinetics of Carbothermic Reduction of Synthetic Chromite

Tuning the Properties of Iron-Doped Porous Graphitic Carbon Synthesized by Hydrothermal Carbonization of Cellulose and Subsequent Pyrolysis

Carbothermal Synthesis of Ni/Fe Bimetallic Nanoparticles Embedded into Graphitized Carbon for Efficient Removal of Chlorophenol

Synthesis and Characterization of Nanometer Activated Carbon-Aluminosilicate Composite Materials

One-Pot Synthesis of Nanoscale Zero-Valent Iron Immobilized with Granular Activated Carbon

Activated carbon fiber-supported nano zero-valent iron on Cr(VI) removal

Optimizing nanocarbon shell in zero-valent iron nanoparticles for improved electron utilization in Cr(VI) reduction

Synthesis And Characterization Of Montmorillonite Supported Zero Valent Iron For Transformation Of Nitroaromatic In Groundwater

Synthesis And Characterization Of Nanostructured Mo2c On Carbon Material By Carbothermal Hydrogen Reduction

Synthesis and Properties of Carbons Dispersed with Α-Iron Particles from Divinylbenzene-Vinylferrocene

Preparation of highly-conductive pyrogenic carbon-supported zero-valent iron for enhanced Cr(VI) reduction

Low temperature selective catalytic reduction of nitric oxide with an activated carbon-supported zero-valent iron catalyst

Carbothermic reduction of vanadium titanomagnetite with the assistance of sodium carbonate

Liquid Nitrogen Activation of Zero-Valent Iron and Its Enhanced Cr(VI) Removal Performance.

Interactions Between Carbon and Metal Oxides and Their Effects on the Carbon/Co2 Reactivity at High Temperatures