Abstract:Tannery industries' effluent contains a high concentration of Cr (VI) which has the potential to affect the environment and public health. Therefore, this study aimed to investigate the optimization of Cr (VI) adsorption by activated carbon (AC) derived from Eichhornia crassipes from an aqueous solution. The adsorbent was activated with dilute sulfuric acid followed by thermal activation. AC was characterized using proximate analysis, SEM, FTIR, X-ray diffraction, and the BET method. The Cr (VI) removal optimization process was performed using a central composite design under the response surface methodology. The proximate analysis showed that the moisture content, volatile matter, ash content, and fixed carbon of the activated carbon were 5.6%, 18.2%, 14.4%, and 61.8% respectively. The surface areas of the Eichhornia crassipes before activation, after activation, and after adsorption were 60.6 g/m 2 , 794.2 g/m 2 , and 412.6 g/m 2 respectively. A highly porous structure with heterogeneous and irregular shapes was observed in the SEM micrograph. In the FTIR analysis, different peaks are indicated with various functional groups. The intensity of XRD peaks decreased as 2 theta values increased, which indicates the presence of an amorphous carbon arrangement. The point of zero charge (pH pzc ) of the activated carbon was found to be 5.20. A maximum Cr (VI) removal of 98.4% was achieved at pH 5, contact time 90 min, adsorbent dose 2 g, and initial Cr (VI) concentration of 2.25 mg/L. Statistically significant interactions (P < 0.05) were observed between the initial Cr (VI) concentration and adsorbent dose as well as the initial Cr (VI) concentration and contact time. Langmuir adsorption isotherm fitted the experimental data best, with an R 2 value of 0.99. The separation constant (RL) indicates that the adsorption process is favorable. The kinetic experimental data were best fitted with the pseudo-second-order model with an R 2 value of 0.99 whereas the adsorption rate is controlled by intraparticle and extragranular diffusion processes. Generally, the AC has the potential to be a strong adsorbent candidate for wastewater treatment at the industrial level.

Adsorption behavior of chromium(VI) on activated carbon from eucalyptus sawdust prepared by microwave-assisted activation with ZnCl2

Adsorption performance and kinetics of Cr(VI) onto activated carbons derived from the waste leaves of invasive plants Rhus typhina and Amorpha fruticosa

Optimization of Cr (VI) removal from aqueous solution with activated carbon derived from Eichhornia crassipes under response surface methodology

Reduction and Removal of Chromium VI in Water by Powdered Activated Carbon.

ADSORPTION OF Cr (VI) FROM AQUEOUS SOLUTION BY SLUDGE-BASE ACTIVATED CARBONS OBTAINED FROM CHEMICAL AND PHYSICAL ACTIVATION

Activated carbon with excellent chromium(VI) adsorption performance prepared by acid–base surface modification

Adsorption of Hexavalent Chromium Using Activated Carbon Produced from Sargassum ssp.: Comparison between Lab Experiments and Molecular Dynamics Simulations

Composite adsorbent of Terminalia catappa fruit shell‐derived activated carbon and chitosan for enhanced removal of chromium(VI): kinetics, thermodynamics, equilibrium and adsorption mechanism

Preparation of activated carbon with high nitrogen content from agro-industrial waste for efficient treatment of chromium (VI) in water

Removal/adsorption mechanisms of Cr(VI) and natural organic matter by nanoscale zero-valent iron-loaded biochar in their coexisting system

Adsorption of Cr(VI) from aqueous solutions using novel activated carbon spheres derived from glucose and sodium dodecylbenzene sulfonate

Adsorptive Removal of Cr(VI) from Aqueous Solutions with an Effective Adsorbent: Cross-Linked Chitosan/montmorillonite Nanocomposites in the Presence of Hydroxy-Aluminum Oligomeric Cations.

The Need for Alternative Measures of Fit in Covariance Structure Modeling.

Removal of Cr(VI) from aqueous solution by macroporous resin adsorption

Effective removal of hexavalent chromium from aqueous solution by ZnCl2 modified biochar: Effects and response sequence of the functional groups

Fabrication and characterization of magnetic eucalyptus carbon for efficient Cr(VI) removal in aqueous solution and its mechanisms

Highly surface activated carbon to remove Cr(VI) from aqueous solution with adsorbent recycling

Preparation of Modified Biochar and Its Adsorption of Cr(VI) in Aqueous Solution

Kinetic, equilibrium isotherm and thermodynamic studies of Cr(VI) adsorption onto low-cost adsorbent developed from peanut shell activated with phosphoric acid

Removal of hexavalent chromium from aqueous solution by different surface-modified biochars: Acid washing, nanoscale zero-valent iron and ferric iron loading