Abstract:Ultrafiltration (UF) membrane modules are static in membrane tanks; thus, result in the continuous development of a cake layer and serious membrane fouling. Thickness regulation is the most convenient method to solve this owing to the looseness induced by flocs. Recently, integrated membrane technology is increasingly being applied due to its high pollutant removal efficiency and low space requirements. Herein, with the injection of Fe-based flocs, the UF membrane performance was investigated with module rotation in the presence of humic acid (HA) and south-to-north water in China. The obtained results showed that the outer cake layer was easily shed away owing to the strong flow shear force. The thickness of the cake layer decreased and membrane fouling was significantly alleviated. The faster the rotation speed, the thinner the cake layer and the lower the membrane fouling was. However, the reduction rate of the cake layer thickness decreased as the rotation speed increased owing to the high density of the inner cake layer. Although both the rotation speed and rotation time played an important role in reducing the membrane fouling, the removal efficiency of HA remained constant, and the cake layer tended to be the main fouling mechanism; thus, indicating that module rotation is beneficial to the integrated technology. Owing to the smaller particle size and higher positive charge of flocs formed under an acidic condition, more negatively charged HA molecules were adsorbed, and the UF membrane performance was superior to that in an alkaline condition. Raw water experiments further confirmed the excellent UF membrane performance. Based on this, the proposed technology has great potential for wide applications in rural areas, particularly with the rapid development of clean energy (e.g., solar energy) and intelligent water services.

System dynamics modeling and simulation of a coagulation-ultrafiltration process for the treatment of drinking water

Coupling Continuous Sand Filtration to Ultrafiltration for Drinking Water Treatment: Improved Performance and Membrane Fouling Control

Ultrafiltration of surface water with coagulation pretreatment by streaming current control

Application of Coagulation-Membrane Rotation to Improve Ultrafiltration Performance in Drinking Water Treatment

Modeling and Control of Water Purification Systems

A pilot-scale study of the integrated floc-ultrafiltration membrane-based drinking water treatment process

Dynamic Model of Rapid Filtration Processes in a Water Works

Pilot study on the shortened process by ultrafiltration adapting to conventional coagulation/sedimentation for drinking water treatment

Application of Response Surface Methodology to the Chemical Cleaning Process of Ultrafiltration Membrane

Modeling of Membrane Flux in Surface Water Treatment by Ultrafiltration

MODELING ON DYNAMIC PROCESS OF MEMBRANE FOULING DURING FINITE CROSSFLOW ULTRAFILTRATION IN CHARGED SYSTEM

Coagulation Pretreatment for a Large-Scale Ultrafiltration Process Treating Water from the Taihu River

Modeling of the Fouling of Inside-out Hollow Fiber UF Membranes

Decision Model for Optimization of Coagulation/Flocculation Process for Wastewater Treatment

CFD-based process optimization of a dissolved air flotation system for drinking water production

Effect of aeration on the critical flux of immersed ultrafiltration membrane for drinking water treatment

Coagulation-ultrafiltration for runoff rainwater treatment-taking rainwater in Southern China area as an example

Enhanced Alleviation of Ultrafiltration Membrane Fouling by Regulating Cake Layer Thickness with Pre-Coagulation During Drinking Water Treatment

Effect of operation conditions on fouling of immersed ultrafiltration membrane for drinking water treatment of surface water

Applying permanganate/bisulfite (PM/BS) pre-oxidation enhanced coagulation to control fouling of ultrafiltration membrane in drinking waterworks

Factors influencing critical flux of UF membrane in drinking water treatment