Abstract:Copolymerization of acrylonitrile (AN) and maleic anhydride was conducted by a water-phase precipitation copolymerization process (WPPCP) with K2S2O8–Na2SO3 as initiator system and the resultant copolymers were used to fabricate ultrafiltration hollow fiber membranes (UHFMs) by a dry–wet phase inversion method. Structures and properties for the UHFMs were studied by the analysis of scanning electron microscopy and the measurements of water permeation, bovine serum albumin (BSA) rejection and breaking strength. Compared with normal solution copolymerization, only poly(acrylonitrile-co-maleic acid)s (PANCMAs) could be obtained with WPPCP due to the hydrolysis of maleic anhydride, however, advantages of WPPCP including high monomer conversion and high copolymer molecular weight were obtained. It was found that increasing the molecular weight of PANCMA or the concentration of casting solution raised BSA rejection and mechanical strength but decreased water flux for the corresponding UHFMs. Membrane structures and properties could also be adjusted by adding additives such as poly(vinyl pyrrolidone) and poly(vinyl alcohol) (PVA) to the casting solution. Ternary phase diagrams of the membrane-forming systems and viscosity data of the casting solutions were used to characterize the characteristics of thermodynamics and diffusion kinetics for the membrane-forming systems. Most promisingly, it was found that the acid groups on membrane surface of PANCMA could be conveniently converted to more reactive anhydride groups by treating the membranes with acetic anhydride/pyridine mixture. Finally, the potentiality for the immobilization of poly(ethylene glycol) (PEG) on membrane surface by the reaction of PEG with anhydride groups to further improve the membrane properties was briefly indicated using Fourier-transform infrared spectroscopy (FT-IR), pure water contact angle and BSA adsorption measurements combining water permeation and BSA rejection determinations.

Composite Membranes from Polyacrylonitrile with Poly(n,n-Dimethylaminoethyl Methacrylate)-Grafted Silica Nanoparticles As Additives

Novel composite nanofiltration membranes containing zwitterions with high permeate flux and improved anti-fouling performance

Hydrophilic Modified Polydopamine Tailored Heterogeneous Polyamide in Thin-Film Nanocomposite Membranes for Enhanced Separation Performance and Anti-Fouling Properties

Poly(vinylidene Fluoride) Ultrafiltration Membranes Containing Hybrid Silica Nanoparticles: Preparation, Characterization and Performance

Composite Nanofiltration Membranes from Polyacrylonitrile and Poly (N, N-Dimethylaminoethyl Methacrylate)-Grafted Silica Nanoparticles

Structure and Properties of Polyamidoamine/polyacrylonitrile Composite Nanofiltration Membrane Prepared by Interfacial Polymerization

Improved antifouling property of zwitterionic ultrafiltration membrane composed of acrylonitrile and sulfobetaine copolymer

Simultaneous Increase of Solvent Flux and Rejection of Thin-Film Composite Membranes by Incorporation of Dopamine-Modified Mesoporous Silica

Performance Improvement of Polysulfone Ultrafiltration Membrane Using Well-Dispersed Polyaniline–Poly(vinylpyrrolidone) Nanocomposite As the Additive

Anti-Fouling Performance of Mixed Matrix PVDF Membranes with Mono-Hydroxyl Poly(dimethylsiloxane) (PDMS-OH) Grafted Silica Nanoparticles

Modulation the Morphologies and Performance of Polyacrylonitrile-Based Asymmetric Membranes Containing Reactive Groups: Effect of Non-Solvents in the Dope Solution

Enhanced Pervaporative Performance of Hybrid Membrane by Incorporating Amphiphilic Carbonaceous Material

Polyamide nanofiltration membrane with high separation performance prepared by EDC/NHS mediated interfacial polymerization

High-flux, Anti-Fouling Dendrimer Grafted PAN Membrane: Fabrication, Performance and Mechanisms

Thermo-responsive polyacrylonitrile membranes prepared with poly(acrylonitrile-g-isopropylacrylamide) as an additive

Explication of Polydopamine Modified G-C3n4 As Effective Additive in Pvdf Nanocomposite Membrane Fabrication for Enhanced Ultrafiltration and Self-Cleaning Performance

Preparation and Performance of PSf/PANI-F127 Composite Ultrafiltration Membrane

Highly efficient antifouling ultrafiltration membranes incorporating zwitterionic poly([3-(methacryloylamino)propyl]-dimethyl(3-sulfopropyl) ammonium hydroxide)

Acrylonitrile-based Copolymers Containing Reactive Groups: Synthesis and Preparation of Ultrafiltration Membranes

Plasma Modification of Substrate with Poly(Methylhydrosiloxane) for Enhancing the Interfacial Stability of Pdms/Pan Composite Membrane

Block Copolymer Nanoparticles Doping Polyacrylonitrile Membranes for Efficient Adsorption of Water-Soluble Dyes from Water