Abstract:Duplex stainless steels (DSSs) possess desirable combinations of mechanical properties and excellent corrosion resistance due to their composition and equilibrium microstructure of roughly equivalent fractions of ferrite and austenite. They are used in harsh environments such as marine infrastructures, oil & gas, and paper & pulp industries. Components with complex geometries are often required for these applications. Additive manufacturing (AM) techniques such as laser powder bed fusion (LPBF) can be harnessed to fabricate components with greatest complexity. However, AM fabrication is well-known to promote non-equilibrium microstructures with high dislocation densities and Cr 2 N precipitates, resulting in inferior ductility. This is generally regarded as a challenge, however, short heat treatments of such as-built microstructures have been shown to attain refined duplex equilibrium microstructures. Recently, annealed LPBF DSS 2205 has been reported to possess strength higher than wrought counterparts and ductility properties better than the as-built state. However, the microstructural phenomena and deformation mechanisms behind these attractive properties remain poorly understood. Through multi-scale microstructural characterization, we show that the improved strength results not only from the hard ferrite phase, but also fine austenite grain size and nanoscale oxide dispersion strengthening. The enhanced ductility may be attributed to a combination of deformation mechanisms including dislocation slip, stacking fault formation, deformation twinning, and a deformation-induced martensitic transformation. We discuss how the level of microstructural complexity and solid-state phase transformations during LPBF and annealing can unlock multiple strengthening mechanisms during tensile deformation. Such fundamental understanding is crucial for designing AM parts with reproducible and optimised mechanical properties.

Microstructural Characterization of Welded Joint in Duplex Stainless Steel by Laser Continuous Heat Treatment

Secondary Austenite Morphologies in Fusion Zone of Welded Joint after Postweld Heat Treatment with a Continuous Wave Laser

Phase Transformation and Mechanical Properties in Laser Continuous Heat Treatment Welds

Electrochemical Corrosion Behavior of the Laser Continuous Heat Treatment Welded Joints of 2205 Duplex Stainless Steel

Microstructure and Texture Characterization of Duplex Stainless Steel Joints Welded by Alternating Magnetic Field-Assisted Hybrid Laser-GMAW Welding

Development of Weld Metal Microstructures in Pulsed Laser Welding of Duplex Stainless Steel

Dissimilar Laser Beam Welding of AISI 420 Martensitic Stainless Steel to AISI 2205 Duplex Stainless Steel: Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties

Microstructural Characteristics and Mechanical Properties in the Laser Beam Welded Joints of High-Strength Microalloyed Steel

Analysis of crack tip transformation zone in austenitic stainless steel laser-MIG hybrid welded joint

Microstructure Formation and Its Effect on Mechanical Properties for Duplex Stainless Steel 2205 Plasma Arc Welded Joint

Microstructure and Corrosion Properties of Laser-Welded SAF 2507 Super Duplex Stainless Steel Joints

On the Microstructural Transformations and Mechanical Performance of Laser Beam Welded UNS S43000 Ferritic Stainless Steel

Pitting Corrosion Behavior in Laser Weld Metals of 2205 DSS with Continuous Heat Treatment

Effect of a Brief Post-Weld Heat Treatment on the Microstructure Evolution and Pitting Corrosion of Laser Beam Welded UNS S31803 Duplex Stainless Steel

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Microstructure and Performance of Hybrid Laser-Arc Welded 40 Mm Thick 316 L Steel Plates

Nonhomogeneous Microstructure Formation and Its Role on Tensile and Fatigue Performance of Duplex Stainless Steel 2205 Multi-Pass Weld Joints

Nano-twining and Deformation-Induced Martensitic Transformation in a Duplex Stainless Steel 2205 Fabricated by Laser Powder Bed Fusion

Microstructure and Tensile Property of the Joint of Laser-MIG Hybrid Welded Thick-Section TC4 Alloy

Mirostructure and Properties of Laser Welded Joints of Dual Phase and Press-Hardened Steels

Mechanical Properties and Microstructure of Austenite-Ferrite Duplex Stainless Steel Hybrid (Laser + GMAW) and SAW Welded Joint