Abstract:A theoretical model based on common pump structure is proposed to analyze the laser output characteristics of DPAL (Diode pumped alkali vapor laser) and XPAL (Exciplex pumped alkali laser) in this paper. The model predicts that an optical-to-optical efficiency approaching 80% can be achieved for continuous-wave four- and five-XPAL systems with broadband pumping which is several times of pumped linewidth for DPAL. Operation parameters including pumped intensity, temperature, cell's length, mixed gas concentration, pumped linewidth and output mirror reflectivity are analyzed for DPAL and XPAL systems basing on the kinetic model. The result shows a better performance in Cs-Ar XPAL laser with requirements of relatively high Ar concentration, high pumped intensity and high temperature. Comparatively, for Cs-DPAL laser, lower temperature and lower pumped intensity should be acquired. In addition, the predictions of selection principal of temperature and cell's length are also presented. The conception of the equivalent "alkali areal density" is proposed in this paper. It is defined as the product of the alkali density and cell's length. The result shows that the output characteristics of DPAL (or XPAL) system with the same alkali areal density but different temperatures turn out to be equal. It is the areal density that reflects the potential of DPAL or XPAL systems directly. A more detailed analysis of similar influences of cavity parameters with the same areal density is also presented. The detailed results of continuous-wave DPAL and XPAL performances as a function of pumped laser linewidth and mixed gas pressure are presented along with an analysis of influences of output coupler.

Definition and analysis of the lineshape matching coefficient in diode-pumped alkali vapor lasers

Analysis on Compressing the Line-Width of the Pump Source of Diode-Pumped Alkli(vopor) Lasers

Analysis of temperature distributions in diode-pumped alkali vapor lasers

Modeling of Time Evolution of Power and Temperature in Single-Pulse and Multi-Pulses Diode-Pumped Alkali Vapor Lasers

Theoretical Analysis of the Semi-Ring and Trapezoid LD Side-Pumped Alkali Vapor Lasers

Modeling of Steady-State Temperature Distribution in Diode-Pumped Alkali Vapor Lasers: Analysis of the Experimental Results

Investigation of Pump-to-seed Beam Matching on Output Features of Rb and Cs Vapor Laser Amplifiers

Kinetic and Fluid Dynamic Modeling, Numerical Approaches of Flowing-Gas Diode-Pumped Alkali Vapor Amplifiers.

Modeling of the Static and Flowing-Gas Ring-Ld Side-Pumped Alkali Vapor Amplifiers

Modeling of a diode four-side symmetrically pumped alkali vapor amplifier.

Three-Dimensional Kinetic and Fluid Dynamic Modeling and Three Iterative Algorithms for Side-Pumped Alkali Vapor Lasers

Modeling of Kinetic and Thermodynamic Processes in a Flowing Exciplex Pumped Alkali Vapor Laser

Modeling of a Diode Side Pumped Cesium Vapor Laser MOPA System

Modeling of an alkali vapor laser MOPA system

Modeling of a Diode Four-Side Pumped Cesium Vapor Laser Amplifier with Flowing Medium

Thermal Effects of High-Power Side-Pumped Alkali Vapor Lasers and the Compensation Method

Computation of Three-Dimensional Temperature Distribution in Diode-Pumped Alkali Vapor Amplifiers

Theoretical Investigation on Exciplex Pumped Alkali Vapor Lasers with Sonic-Level Gas Flow

Influences of Operating Parameters on Deleterious Processes of Side-Pumped Cesium Vapor Laser Amplifiers with Flowing Medium

Modeling of Pulsed Cs Vapor Lasers in Transversely Pumped Configuration

Comparative Study of Dpal and Xpal Systems and Selection Principal of Parameters