Abstract:As the essential component of a quantum dot-sensitized solar cell (QDSC), the counter electrode (CE) plays an important role in electron transfer and catalytic reduction acquisition throughout the device. A novel route to design multilayer functionalized Cu2S thin films as CEs with high catalytic activity and enhanced stability, as well as large specific surface area and high conductivity, is presented. Firstly, Mo-based films were prepared by magnetron sputtering on a glass substrate, and then porous CuZnMo conductive films were formed by etching with hydrochloric acid. Secondly, indium tin oxide (ITO) film was sputtered onto the porous structure to act as a protective layer, and a porous ITO/CuZnMo structured film was obtained after optimization. In the third step, multilayer Cu(x)/ITO/CuZnMo structured films were acquired by sputtering Cu films. Finally, multilayer Cu2S(t)/ITO/CuZnMo functionalized film CEs were obtained via in situ sulfidation of sputtered Cu films. The functions of conduction and resistance to electrolyte corrosion were produced and enhanced by annealing an ITO layer at high temperature prior to Cu deposition, while catalytic activity enabled by Cu2S was realized from Cu film sulfidation. The multilayer Cu2S/ITO(500 °C)/CuZnMo functionalized films exhibit high catalytic activity and enhanced stability for resistance to electrolyte corrosion. Taking multilayer Cu2S/ITO(500 °C)/CuZnMo films as CEs, the QDSCs demonstrated good stability of power conversion efficiency (PCE) after 500 h of irradiation, from an initial 4.21% to a final 4.00%. Furthermore, the thickness of Cu2S film modulated by the duration of Cu sputtering was investigated. It was found that the QDSCs using multilayer Cu2S(40 min)/ITO/CuZnMo functionalized film with a Cu2S thickness of 1.2 μm as CE exhibit the best performance, and the R ct value was 0.57 Ω. The best photovoltaic performance with a PCE of 5.21% (V oc = 533.1 mV, J sc = 18.80 mA cm-2, FF = 52.84%) was achieved under AM 1.5 radiation with an incident power of 100 mW cm-2. This design of a multilayer functionalized CE introduces potential alternatives to the common brass-based CE for long-term QDSCs with high performance.

Electroplating Cuprous Sulfide Counter Electrode for High-Efficiency Long-Term Stability Quantum Dot Sensitized Solar Cells

CuS/brass Based Counter Electrode in Quantum Dot-Sensitized Solar Cells (qdscs) with Considerable Efficiency and Good Stability

Superior Cu2s/Brass-Mesh Electrode in Cds Quantum Dot Sensitized Solar Cells for Dual-Side Illumination

A novel strategy to design a multilayer functionalized Cu2S thin film counter electrode with enhanced catalytic activity and stability for quantum dot sensitized solar cells

Fabricating CuS counter electrode for quantum dots-sensitized solar cells via electro-deposition and sulfurization of Cu 2 O

Quantum dot sensitized solar cells with efficiency up to 8.7% based on heavily copper-deficient copper selenide counter electrode

Antimony tin oxide/lead selenide composite as efficient counter electrode material for quantum dot-sensitized solar cells

Highly efficient and stable spray assisted nanostructured Cu2S/Carbon paper counter electrode for quantum dots sensitized solar cells

FeS/nickel Foam As Stable and Efficient Counter Electrode Material for Quantum Dot Sensitized Solar Cells

Rational Design and Fabrication of Skeletal Cu 7 S 4 Nanocages for Efficient Counter Electrode in Quantum Dot-Sensitized Solar Cells

Earth-abundant Cu2SnSe3 Thin Film Counter Electrode for High-Efficiency Quantum Dot-Sensitized Solar Cells

Polyoxometalate-Modified Ternary Copper-Tungsten-Sulfide Nanocrystals as High- Performance Counter Electrode Materials for Quantum Dots-Sensitized Solar Cells

Cuprous Sulfide Counter Electrodes Prepared By Ion Exchange For High-Efficiency Quantum Dot-Sensitized Solar Cells

Electrochemically deposited CoS films as counter electrodes for efficient quantum dot-sensitized solar cells

Octahedron Shaped Lead Sulfide Nanocrystals As Counter Electrodes for Quantum Dot Sensitized Solar Cells

Efficient iron sulfide counter electrode for quantum dots-sensitized solar cells

Controlled Sulfidation Approach for Copper Sulfide–Carbon Hybrid As an Effective Counter Electrode in Quantum-Dot-Sensitized Solar Cells

MOF-derived CuxS double-faced-decorated carbon nanosheets as high-performance and stable counter electrodes for quantum dots solar cells

Low-cost Porous Cu2ZnSnSe4 Film Remarkably Superior to Noble Pt As Counter Electrode in Quantum Dot-Sensitized Solar Cell System

Cuprous Sulfide On Ni Foam As A Counter Electrode For Flexible Quantum Dot Sensitized Solar Cells

Development of Cu2S/carbon Composite Electrode for CdS/CdSe Quantum Dot Sensitized Solar Cell Modules