Abstract:The capacitive behaviors of carbon nanotubes (CNTs) are promoted to 140% by compression. The significance of the capacitance‐improving effect depends on the geometry of the CNTs. The longer and narrower the CNTs, the more significant the improving effect. An light emitting diode lasts longer time as powered by a CNT‐based supercapacitor under compression. The unique geometry of carbon nanotubes (CNTs) contributes to their excellent rate capability when used as electrode materials for supercapacitors (SCs). However, the practical application of low‐cost commercial CNTs is limited by their moderate specific capacitance due to the relatively low surface area which is around 220 m2 g−1. This limitation can be addressed by applying proper compressive stress to the CNTs, resulting in improved capacitance. The effects of compression on capacitance vary depending on the length and inner diameter of the CNTs, which have been systematically investigated. It has been found that longer and narrower CNTs exhibit more significant improvements in capacitance due to compression. Specifically, under 12 MPa, there is an ≈135% increase in specific capacitance compared to that under 1 MPa, with the optimum value of 68.2 F g−1 at 1 A g−1. An excellent rate capability of 93.5% at 40 A g−1 is also obtained by compression. Furthermore, when an light emitting diode light is powered by a compressed CNT‐based SC, both brightness and lasting time are dramatically enhanced compared to the case without compression. This cost‐efficient strategy for improving the energy storage performance of CNTs may facilitate their practical application as electrode materials for ultrafast supercapacitors.

Molecular Insights into Carbon Nanotube Supercapacitors: Capacitance Independent of Voltage and Temperature

Effect of temperature on the capacitance of carbon nanotube supercapacitors.

Expanded Carbon Nanotube Fiber at the Liquid-Air Interface for High-Performance Fiber-Based Supercapacitors and Electrochemical Sensors

Electrothermal Characterization of Carbon Nanotube Field Effect Transistors (Cntfets)

Molecular Insights into Carbon Supercapacitors Based on Room-Temperature Ionic Liquids

Molecular Insights into Curvature Effects on the Capacitance of Electrical Double Layers in Tricationic Ionic Liquids with Carbon Nanotube Electrodes

Single‐walled Carbon Nanotubes As Electrode Materials for Supercapacitors

Temperature Effects on Electrochemical Performance of Carbon Nanotube Film Based Flexible All-Solid-state Supercapacitors

Electrochemical properties of carbon nanotubes in ionic liquids/organic solvent mixed electrolytes

Interfacial Thermal Transport and Electrical Performances of Supercapacitors with Graphene/Carbon Nanotube Composite Electrodes

Electronic structures and quantum capacitance of single-walled carbon nanotubes doped by 3d transition-metals: A first principles study

Interfacial Thermal Transport and Electrical Performance of Supercapacitors with Graphene/Carbon Nanotube Composite Electrodes

Nitrogen, Boron and Fluorine Tri-Doped Carbon Nanotubes on Carbon Cloth As the Electrode Materials for Supercapacitors

Supercapacitor Electrodes from Tubes-in-Tube Carbon Nanostructures

Compression‐Assisted Improvement of Electrochemical Performances of Carbon Nanotube in Symmetric Supercapacitors

Design and Performance of an Ultra-Flexible Solid State Supercapacitor Based on Thermo-Crosslinking Carbon Nanotube Paper / Co 3 O 4 Nanowire Electrode

Temperature-dependent differential capacitance of an ionic liquid-graphene-based supercapacitor

Carbon nanotube-based electrodes for flexible supercapacitors

Electric-field-induced Microstructure Modulation of Carbon Nanotubes for High-Performance Supercapacitors

Electrochemical Capacitive Properties of Cnt Fibers Spun from Vertically Aligned Cnt Arrays

Highly flexible, all solid-state micro-supercapacitors from vertically aligned carbon nanotubes.