Abstract:Design of thermoelectric materials focuses on the optimization of several unfavorably coupled factors: electrical conductivity, Seebeck coefficient, and thermal conductivity. Recent work in thermoelectrics has focused on decreasing lattice thermal conductivity by nanostructuring thermoelectric materials, while recent work in photovoltaics has demonstrated ligand stripping as a means to increased electron mobility in thin films of nanoparticles. In the present work, these two features are combined. A multigram scale synthesis of dispersible, lead telluride nanocrystals (25-50 nm) is developed using hot-injection methods in common organic solvents. These nanocrystals (NCs) are ligand stripped with sulfide (PbTe-S) or iodide (PbTe-I) sources to result in p-type or n-type materials with large Seebeck coefficients at room temperature of 520 or -540 mu V.K-1, respectively. Sequential stripping with sulfide and then iodide (PbTe-SI) resulted in a small Seebeck due to counter doping. PbTe-S and PbTe-SI are found to generate nanostructured composites by growth of lead sulfide nanocrystals (similar to 50-60 nm) in situ upon annealing. However, the electrical conductivities are low (<1 S.cm(-1)) due to excess doping during the ligand stripping. Intentional formation of a nanocomposite (PbTe-PbS) is achieved by combining PbTe NCs with 4-6 nm diameter lead sulfide particles via mixing by incipient wetness with a target of 8 mol % lead sulfide. The resulting nanocomposite is n-type with a Seebeck coefficient of -160 mu V.K-1 and an electrical conductivity of 42 S.cm(-1) at room temperature. The lattice thermal conductivities of all materials at room temperature are substantially lower than those of bulk lead telluride (2.0 W m(-1).K-1). However, thermoelectric figure of merit (ZT) values are low for all samples (maximum ZT = 0.03 for PbTe-PbS), attributed primarily to the low electrical conductivities. This work underscores the importance of developing new methods for augmenting electrical conductivity if nanoparticle assemblies are to be practically employed in thermoelectrics.

Design of Lead Telluride Based Thermoelectric Materials Through Incorporation of Lead Sulfide Inclusions or Ligand Stripping of Nanosized Building Blocks

High Thermoelectric Performance in PbTe Due to Large Nanoscale Ag2Te Precipitates and La Doping

Thermoelectric performance of tellurium-reduced quaternary p -type lead–chalcogenide composites

Thermoelectric Enhancements in PbTe Alloys Due to Dislocation‐Induced Strains and Converged Bands

Band Engineering Through Pb‐Doping of Nanocrystal Building Blocks to Enhance Thermoelectric Performance in Cu3SbSe4

Promoting SnTe As an Eco‐Friendly Solution for P‐pbte Thermoelectric Via Band Convergence and Interstitial Defects

PbTe–PbSnS2 Thermoelectric Composites: Low Lattice Thermal Conductivity from Large Microstructures

Synthesis and Thermoelectric Characterization of Lead Telluride Hollow Nanofibers

Nanostructures Boost the Thermoelectric Performance of PbS

High Thermoelectric Performance Via Hierarchical Compositionally Alloyed Nanostructures.

High Performance Na-doped PbTe-PbS Thermoelectric Materials: Electronic Density of States Modification and Shape-Controlled Nanostructures.

High Performance Thermoelectrics from Earth-Abundant Materials: Enhanced Figure of Merit in PbS by Second Phase Nanostructures.

Thermoelectric enhancement at low temperature in nonstoichiometric lead-telluride compounds

Thermoelectric Performance Of Nanostructured In/Pb Codoped Snte With Band Convergence And Resonant Level Prepared Via A Green And Facile Hydrothermal Method

Design Principle of Telluride-Based Nanowire Heterostructures for Potential Thermoelectric Applications

Synergistic Band Convergence and Endotaxial Nanostructuring: Achieving Ultralow Lattice Thermal Conductivity and High Figure of Merit in Eco-Friendly SnTe

Synthesis of Snte/Agsbse2 Nanocomposite As A Promising Lead- Free Thermoelectric Material

Enhanced Thermoelectric Performance of Solution-Derived Bismuth Telluride Based Nanocomposites Via Liquid-Phase Sintering

High thermoelectric performance of p-type SnTe via a synergistic band engineering and nanostructuring approach

Surfactant-free Synthesis of Bi2Te3-Te Micro-Nano Heterostructure with Enhanced Thermoelectric Figure of Merit.

High Performance Thermoelectrics from Earth-Abundant Materials: Enhanced Figure of Merit in Pbs Through Nanostructuring Grain Size