Facile and Large-Scale Fabrication of Hierarchical Znfe2o4/Graphene Hybrid Films As Advanced Binder-Free Anodes for Lithium-Ion Batteries

Bo Wang,Songmei Li,Bin Li,Jianhua Liu,Mei Yu

DOI: https://doi.org/10.1039/c4nj01802h

IF: 3.3

2015-01-01

New Journal of Chemistry

Abstract:Hierarchical ZnFe2O4/graphene hybrid films are deposited on copper foils as a promising binder-free lithium-ion battery anode.

What problem does this paper attempt to address?

Electrophoretic Deposition of Hierarchical Co3o4@Graphene Hybrid Films As Binder-Free Anodes for High-Performance Lithium-Ion Batteries

Xiaoyu Wu,Bo Wang,Songmei Li,Jianhua Liu,Mei Yu

DOI: https://doi.org/10.1039/c5ra02302e

IF: 4.036

2015-01-01

RSC Advances

Abstract:Hierarchical Co3O4@graphene hybrid films are deposited on copper foils as binder-free anodes for high-performance lithium-ion batteries.
Smartly Designed Hierarchical Mno2@Fe3o4/Cnt Hybrid Films As Binder-Free Anodes For Superior Lithium Storage

Du-Juan Yan,Xiao-Dong Zhu,Xiao-Tian Gao,Liang-Liang Gu,Yu-Jie Feng,Ke-Ning Sun

DOI: https://doi.org/10.1002/asia.201800922

2018-01-01

Chemistry - An Asian Journal

Abstract:Nowadays, the development of advanced anode materials is highly desirable for the increasing demand for high-performance lithium-ion batteries (LIBs). Nanostructured MnO2 has received utmost attention due to high theoretical capacity (1230mAhg(-1)), abundant resources, environmental benignity, and shortened electron and ion diffusion paths. Unfortunately, poor electronic conductivity and strong aggregation inclination of MnO2 nanostructures result in disappointing electrochemical performances, which restrict their practical application as sole institute. Here, we propose smartly designed MnO2@Fe3O4/CNT hybrid films, in which MnO2 nanosheets, Fe3O4 nanoparticles and CNTs are hierarchically assembled in a unique stage of nanosheets-nanoparticles-nanotubes. The resulting MnO2@Fe3O4/CNT hybrid films can be directly used as anodes without any polymer binders, and exhibit significant synergistic interactions among three components, achieving excellent reversible capacity and rate performance.
Ultra-small and Highly Crystallized ZnFe2O4 Nanoparticles Within Double Graphene Networks for Super-Long Life Lithium-Ion Batteries

Longhai Zhang,Tong Wei,Jingming Yue,Lizhi Sheng,Zimu Jiang,Deren Yang,Libo Yuan,Zhuangjun Fan

DOI: https://doi.org/10.1039/c7ta02726e

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:We report a novel strategy for spatial confinement of ultra-small and highly crystallized ZnFe2O4 nanoparticles within double graphene networks constructed by ultra-small and large graphene sheets. The ZnFe2O4/graphene hybrid exhibits a large reversible capacity, excellent rate capability, and superior cycling stability.
Green Fabrication of Sandwich-Like and Dodecahedral C@Fe3O4@C As High-Performance Anode for Lithium-Ion Batteries

Ge Liu,Jie Shao,Youjun Gao,Zheng Chen,Qunting Qu

DOI: https://doi.org/10.1007/s10008-017-3667-3

IF: 2.747

2017-01-01

Journal of Solid State Electrochemistry

Abstract:Sandwich-structured C@Fe3O4@C hybrids with Fe3O4 nanoparticles sandwiched between two conductive carbon layers have attracted more and more attention owing to enhanced synergistic effects for lithium-ion storage. In this work, an environment-friendly procedure is developed for the fabrication of sandwich-like C@Fe3O4@C dodecahedrons. Zeolitic imidazolate framework (ZIF-8)-derived carbon dodecahedrons (ZIF-C) are used as the carbon matrix, on which iron precursors are homogeneously grown with the assistance of a polyelectrolyte layer. The subsequent polydopamine (PDA) coating and calcination give rise to the formation of sandwiched ZIF-C@Fe3O4@C. When being evaluated as the anode material for lithium-ion batteries, the obtained hybrid manifests a high reversible capacity (1194 mAh g−1 at 0.05 A g−1), good high-rate behavior (796 mAh g−1 at 10 A g−1), and negligible capacity loss after 120 cycles.
Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Xu Wang,Peng Zhang,Tong Wang,Osamu Yamamoto,Nobuyuki Imanishi,Miao Wang

DOI: https://doi.org/10.1016/j.jelechem.2018.07.001

IF: 4.598

2018-01-01

Journal of Electroanalytical Chemistry

Abstract:Mesoporous NiCo2O4 nanoneedle arrays on graphene film grown directly on a three-dimensional Ni foam have been fabricated by a facile hydrothermal method, accompanied by annealing under air atmosphere. The BET specific surface area of NiCo2O4@graphene film@Ni foam is as high as 47.65 m(2) g(-1). The porous composites served as a binder-free anode material for lithium-ion batteries display an excellent and stable electrochemical performance with high specific capacities of 1232 mAh g(-1) at the current density of 500 mA g(-1) over 100 cycles and 1493 mAh g(-1) at the current density of 1500 mA g(-1) after 230 cycles with Coulombic efficiency higher than 97%. Moreover, a fairly high rate capacity of 586 mAh g(-1) retained even at a high current density of 8000 mA g(-1). The outstanding electrochemical performance should be attributed to synergetic effect of NiCo2O4 nanoneedle arrays with mesoporous nature and high specific area as well as graphene substrate supporting, which can accommodate the volume variation during the electrochemical reactions and facilitate the ion and electron transmission.
Self-supporting Co3O4/Graphene Hybrid Films As Binder-free Anode Materials for Lithium Ion Batteries

Shouling Wang,Ronghua Wang,Jie Chang,Ning Hu,Chaohe Xu

DOI: https://doi.org/10.1038/s41598-018-21436-4

IF: 4.6

2018-01-01

Scientific Reports

Abstract:A self-supporting Co3O4/graphene hybrid film has been constructed via vacuum filtration of Co(OH)2 nanosheet and graphene, followed by a two-step thermal treatment. Within the hybrid film, Co3O4 nanoparticles with size of 40~60 nm uniformly in-situ grew on the surface of graphene, forming a novel porous and interleaved structure with strong interactions between Co3O4 nanoparticles and graphene. Such fascinating microstructures can greatly facilitate interfacial electron transportation and accommodate the volume changes upon Li ions insertion and extraction. Consequently, the binder-less hybrid film demonstrated extremely high reversible capacity (1287.7 mAh g−1 at 0.2 A g−1), excellent cycling stability and rate capability (1110 and 800 mAh g−1 at 0.5 and 1.0 A g−1, respectively).
Self-Assembly Of A Znfe2o4/Graphene Hybrid And Its Application As A High-Performance Anode Material For Li-Ion Batteries

Wentao Song,Jian Xie,Shuangyu Liu,Gaoshao Cao,Tiejun Zhu,Xinbing Zhao

DOI: https://doi.org/10.1039/c2nj40534b

IF: 3.3

2012-01-01

New Journal of Chemistry

Abstract:A nanohybrid based on ZnFe2O4 nanospheres and graphene nanosheets (ZnFe2O4/G) has been synthesized by a facile one-pot in situ solvothermal route. The results show that the formation of ZnFe2O4 and the reduction of graphite oxide take place simultaneously during the solvothermal reactions. Spheric ZnFe2O4 nanoparticles with a size of 100-200 nm are confined in between the graphene sheets, forming a unique hybrid nanostructure. The electrochemical measurements have shown that the ZnFe2O4/G hybrid exhibits improved electrochemical Li-storage properties compared with bare ZnFe2O4, due to the combined buffering, confining and conducting effects of the in situ introduced graphene nanosheets.
Hierarchical three-dimensional ZnCo 2O 4 nanowire arrays/carbon cloth anodes for a novel class of high-performance flexible lithium-ion batteries

Bin Liu,Jun Zhang,Xianfu Wang,Guichu Chen,Di Chen,Chongwu Zhou,Guozhen Shen

DOI: https://doi.org/10.1021/nl300794f

IF: 10.8

2012-01-01

Nano Letters

Abstract:Flexible electronics is an emerging and promising technology for next generation of optoelectronic devices. Herein, hierarchical three-dimensional ZnCo2O4 nanowire arrays/carbon cloth composites were synthesized as high performance binder-free anodes for Li-ion battery with the features of high reversible capacity of 1300-1400 mAh g(-1) and excellent cycling ability even after 160 cycles with a capacity of 1200 mAh g(-1). Highly flexible full batteries were also fabricated, exhibiting high flexibility, excellent electrical stability, and superior electrochemical performances.
Free-standing and binder-free lithium-ion electrodes based on robust layered assembly of graphene and Co3O4 nanosheets.

Ronghua Wang,Chaohe Xu,Jing Sun,Yangqiao Liu,Lian Gao,Chucheng Lin

DOI: https://doi.org/10.1039/c3nr01392h

IF: 6.7

2013-01-01

Nanoscale

Abstract:Free-standing and binder-free Co3O4/graphene films were fabricated through vacuum filtration and thermal treatment processes, in which sheet-like Co3O4 and graphene were assembled into a robust lamellar hierarchical structure via electrostatic interactions. The morphological compatibility coupled with strong interfacial interactions between Co3O4 and graphene significantly promoted the interfacial electron and lithium ion transport. When used as a binder-less and free-standing electrode for lithium-ion batteries, the hybrid film delivered a high specific capacity (similar to 1400 mA h g(-1) at 100 mA g(-1) based on the total electrode weight), enhanced rate capability and excellent cyclic stability (similar to 1200 mA h g(-1) at 200 mA g(-1) after 100 cycles). This effective strategy will provide new insight into the design and synthesis of many other composite electrodes for high-performance lithium-ion batteries.
Hierarchical Hybrid ZnFe2O4 Nanoparticles/reduced Graphene Oxide Composite with Long-Term and High-Rate Performance for Lithium Ion Batteries

Zhaoyang Li,Yang Xiang,Shiyao Lu,Bitao Dong,Shujiang Ding,Guoxin Gao

DOI: https://doi.org/10.1016/j.jallcom.2017.11.336

IF: 6.2

2017-01-01

Journal of Alloys and Compounds

Abstract:Hierarchical hybrid nanostructure of mesoporous ZnFe2O4 nanoparticles anchored on reduced graphene oxide (ZnFe2O4 NPs/rGO) has been successfully developed in this research via a fast low-temperature refluxing method and a subsequent-annealing treatment in N-2. The unique mesoporous network structures of ZnFe2O4 NPs supported by flexible rGO sheets offer sufficient electrode-electrolyte contact, shorten Li+ ions diffusion distance, and thus greatly facilitate the electrochemical reactions via accommodating the volume change efficiently during cycling. Meanwhile, the conductive rGO matrix in the hybrid composite also ensures rapid electron transport to avoid the serve pulverization. Just based on such beneficial synergistic effect, the well-designed hierarchical hybrid ZnFe2O4 NPs/rGO composites present excellent lithium storage performance with high reversible discharge capacity, long-term cycle stability and superb high-rate capability when used as an anode for LIBs. A stable discharge capacity of as high as about 1106.7 mAh g(-1) is well maintained even after 400 cycles at the current density of 200 mA g(-1). We think this facile strategy could be further extended to the fabrication of other graphene-based electrodes for advanced energy applications. (c) 2017 Elsevier B.V. All rights reserved.
Hierarchical urchin-like Fe2O3 structures grown directly on Ti foils for binder-free lithium-ion batteries with fast charging/discharging properties

Yang Cao,Ai-Qin Zhang,He-Wei Luo,Hai-Li Gao,Ji Yan,Qing-Qing Yan,Yin-Man Liu,Yong Zhang

DOI: https://doi.org/10.1016/j.inoche.2020.107769

IF: 3.428

2020-01-01

Inorganic Chemistry Communications

Abstract:Hierarchical urchin-like Fe2O3 structures were grown on conductive Ti foil with robust adhesion via a facile two-step solvothermal method and subsequent annealing, and directly used as a binder-free lithium-ion battery anode Benefitting by the unique structural features, the resultant Fe2O3 hierarchical structures exhibited excellent electrochemical performance with remarkable specific capacities at a serious of current rates 1–5 A g−1 and good cycling stability for excellently reversible lithium storage. The enhanced electrochemical performance demonstrates their promise for use as integrated binder-free electrodes in lithium-ion batteries. Using this additive/binder-free electrode, a discharge capacity as high as 581.2 mAh g−1 at a current density of 5 A g−1 was achieved after 1000 cycles. Importantly, the facile and effective strategy developed in this study can be extended to other metal oxides for various applications.
Uniquely Arranged Graphene-on-graphene Structure As a Binder-Free Anode for High-Performance Lithium-Ion Batteries.

Minghui Ye,Zelin Dong,Chuangang Hu,Huhu Cheng,Huibo Shao,Nan Chen,Liangti Qu

DOI: https://doi.org/10.1002/smll.201401610

IF: 13.3

2014-01-01

Small

Abstract:3D graphene interconnected frameworks homogeneously connected with a few-layer graphene film (3DG/FLG) constitute a novel hierarchical hybrid structure for anodes in lithium-ion batteries. The pore-rich 3D graphene network is favorable for Li(+) diffusion and electron transport, and the FLG is a non-metallic current collector that effectively collects/transports charge carriers from/to the 3D graphene network and provides an excellent scaffold to support the 3DG.
Preparation of Co3O4 Hollow Microsphere/graphene/carbon Nanotube Flexible Film As a Binder-Free Anode Material for Lithium-Ion Batteries

Fei Li,Gaohong Zhai,Haijing Ren,Gang Wang,Hui Wang

DOI: https://doi.org/10.1007/s11581-017-2173-z

IF: 2.961

2017-01-01

Ionics

Abstract:A flexible Co3O4 hollow microsphere/graphene/carbon nanotube hybrid film is successfully prepared through a facile filtration strategy and a subsequent thermally treated process. The composition, morphology, and structure of the as-prepared film are characterized by X-ray diffraction, X-ray photoelectron spectrometer, scanning electron microscopy, and transmission electron microscopy. Based on the morphology characterizations on the hybrid film, the Co3O4 hollow microspheres are uniformly and closely attached on three-dimensional (3D) graphene/carbon nanotubes (GR/CNTs) network, which decreases the agglomeration of Co3O4 microspheres effectively. In this hybrid film, the 3D GR/CNT network which enhances conductance as well as prevents aggregation is a benefit to help Co3O4 to exert its lithium storage capabilities sufficiently. When used as a binder-free anode material for lithium-ion batteries, the hybrid film delivers excellent electrochemical properties involving reversible capacity (863 mAh g−1 at a current density of 100 mA g−1) and rate performance (185 mAh g−1 at a current density of 1600 mA g−1).
Self-Assembled Hierarchical MoO2/Graphene Nanoarchitectures and Their Application As a High-Performance Anode Material for Lithium-Ion Batteries

Yongming Sun,Xianluo Hu,Wei Luo,Yunhui Huang

DOI: https://doi.org/10.1021/nn201802c

IF: 17.1

2011-01-01

ACS Nano

Abstract:Self-assembled hierarchical MoO(2)/graphene nanoarchitectures have been fabricated on a large scale through a facile solution-phase process and subsequent reduction of the Mo-precursor/graphene composite. The as-formed MoO(2)/graphene nanohybrid as an anode material for lithium-ion batteries exhibits not only a highly reversible capacity but also an excellent cycling performance as well as good rate capability. Results show that the hierarchical rods made of primary MoO(2) nanocrystals are uniformly encapsulated within the graphene sheets. The synergistic effect of the hierarchical nanoarchitecture and the conducting graphene support may contribute to the enhanced electrochemical performances of the hybrid MoO(2)/graphene electrode. This work presents a facile synthetic strategy that is potentially competitive for scaling-up industrial production. Besides, the MoO(2)/graphene hybrids with a well-defined hierarchical topology not only provide flexible building blocks for advanced functional devices, but are also ideal candidates for studying their nanoarchitecture-dependent performances in catalytic and electronic applications.
Facile Fabrication of Reduced Graphene Oxide Covered Znco2o4 Porous Nanowire Array Hierarchical Structure on Ni-Foam As A High Performance Anode for A Lithium-Ion Battery

Yujue Wang,Yongzhi Zhang,Junke Ou,Qian Zhao,Mei Liao,Dan Xiao

DOI: https://doi.org/10.1039/c5ra21916g

IF: 4.036

2016-01-01

RSC Advances

Abstract:We have successfully prepared a ZNWG–Ni electrode for LIBs showing superior performance with a high specific capacity, fine rate capability and remarkable cycling stability.
Three-dimensional Core-Shell Fe2O3 @ Carbon/carbon Cloth As Binder-Free Anode for the High-Performance Lithium-Ion Batteries

Xiaohua Wang,Miao Zhang,Enzuo Liu,Fang He,Chunsheng Shi,Chunnian He,Jiajun Li,Naiqin Zhao

DOI: https://doi.org/10.1016/j.apsusc.2016.08.112

IF: 6.7

2016-01-01

Applied Surface Science

Abstract:A facile and scalable strategy is developed to fabricate three dimensional core-shell Fe2O3 @ carbon/carbon cloth structure by simple hydrothermal route as binder-free lithium-ion battery anode. In the unique structure, carbon coated Fe2O3 nanorods uniformly disperse on carbon cloth which forms the conductive carbon network. The hierarchical porous Fe2O3 nanorods in situ grown on the carbon cloth can effectively shorten the transfer paths of lithium ions and reduce the contact resistance. The carbon coating significantly inhibits pulverization of active materials during the repeated Li-ion insertion/extraction, as well as the direct exposure of Fe2O3 to the electrolyte. Benefiting from the structural integrity and flexibility, the nanocomposites used as binder-free anode for lithium-ion batteries, demonstrate high reversible capacity and excellent cyclability. Moreover, this kind of material represents an alternative promising candidate for flexible, cost-effective, and binder-free energy storage devices. (C) 2016 Elsevier B.V. All rights reserved.
Electrospinning ZnO/carbon Nanofiber As Binder-Free and Self-Supported Anode for Li-ion Batteries

Hui Ning,Hui Xie,Qingshan Zhao,Jialiang Liu,Wei Tian,Yixian Wang,Mingbo Wu

DOI: https://doi.org/10.1016/j.jallcom.2017.06.099

IF: 6.2

2017-01-01

Journal of Alloys and Compounds

Abstract:For the preparation of higher performance Li-ion batteries, we fabricated a binder-free and selfsupported hybrid nanofiber composed of ZnO nanoparticle-decorated core/shell carbon nanofibers (CNFs) by single-nozzle electrospinning of polyvinylpyrrolidone, polyacrylonitrile and zinc acetate dihydrate. After calcination, the hybrid nanofiber can directly serve as binder-free and self-supported anode for Li-ion batteries, which exhibits high capability (723 mA h g(-1) at 100 mA g(-1)) and good cycling stability. The CNFs in crisscross structure with good conductivity and strength ensure the fast transportation of electrons and Li ions. In addition, the ca. 2.0 nm amorphous carbon layers on the surface of ZnO nanoparticles can suppress the volume expansion of ZnO in the insertion/extraction of Li ions and improve the cycling stability of ZnO/CNFs, while do not inhibit the transportation of Li ions. These encouraging results suggest a simple and effective method to obtain binder-free and selfsupported anode material for Li-ion batteries. (C) 2017 Elsevier B.V. All rights reserved.
Synthesis of interconnected mesoporous ZnCo2O4 nanosheets on a 3D graphene foam as a binder-free anode for high-performance Li-ion batteries

Xu Wang,Qi Chen,Pei Zhao,Miao Wang

DOI: https://doi.org/10.1039/C8RA05035J

IF: 4.036

2018-01-01

RSC Advances

Abstract:Interconnected mesoporous sheet-like ZnCo2O4 nanomaterials directly grown on a three-dimensional (3D) graphene film (GF) coated on Ni foam (NF) have been successfully synthesized via an effective chemical vapor deposition (CVD) method combined with a subsequent hydrothermal route. When the ZnCo2O4@3DGF@NF composite material with a high surface area of 46.06 m2 g−1 is evaluated as a binder-free anode material for lithium ion batteries, it exhibits a superior electrochemical performance with a high discharge capacity (1223 mA h g−1 at a current density of 500 mA g−1 after 240 cycles), and an excellent reversibility (coulombic efficiency of 97–99%). Such an outstanding electrochemical performance may be attributed to its unique mesoporous sheet-like nanostructure with a 3DGF supporting, which can facilitate the electrolyte penetration and accelerate the ion/electron transport, as well as buffer the volume variation during charge/discharge processes.
Hierarchical Shell/core CuO Nanowire/carbon Fiber Composites As Binder-Free Anodes for Lithium-Ion Batteries

Wei Yuan,Jian Luo,Baoyou Pan,Zhiqiang Qiu,Shimin Huang,Yong Tang

DOI: https://doi.org/10.1016/j.electacta.2017.04.159

IF: 6.6

2017-01-01

Electrochimica Acta

Abstract:Developing high-performance electrode structures is of great importance for advanced lithium-ion batteries. This study reports an efficient method to fabricate hierarchical shell/core CuO nanowire/carbon fiber composites via electroless plating and thermal oxidation processes. With this method, a binder-free CuO nanowire/carbon fiber shell/core hierarchical network composite anode for lithium-ion batteries is successfully fabricated. The morphology and chemical composition of the anode are characterized, and the electrochemical performance of the anode is investigated by standard electrochemical tests. Owing to the superior properties of carbon fibers and the morphological advantages of CuO nanowires, this composite anode still retains an excellent reversible capacity of 598.2 mAh g (1) with a capacity retention rate above 86%, even after 50 cycles, which is much higher than the CuO anode without carbon fibers. Compared to the typical CuO/C electrode systems, the novel binder-free anode yields a performance close to that of the typical core/shell electrode systems and a much higher reversible capacity and capacity retention than the similar shell/core patterns as well as the anodes with binders. It is believed that this novel anode will pave the way to the development of binder-free anodes in response to the increasing demands for high-power energy storage. (C) 2017 Elsevier Ltd. All rights reserved.
In Situ Fabrication of Hierarchical Porous CoO/Cu2O Composites on Cu Foam As High‐Performance Freestanding Anodes for Lithium–Ion Batteries

Tingting Zhou,Zhen Cao,Houyi Ma,Xizheng Liu

DOI: https://doi.org/10.1002/ente.201700096

IF: 4.149

2017-01-01

Energy Technology

Abstract:A hierarchical porous CoO/Cu2O nanoarray assembled on three-dimensional Cu foam was successfully fabricated by a facile solution-phase cation exchange technique. The morphology and crystalline structure of the target composite were optimized by investigating the sintering conditions. The unique bimetallic oxides demonstrate a secondary porous structure on primary nanoarrays, which facilitated the electrolyte permeation and decreased the ionic transport distance. Owing to the conductive Cu framework and synergistic biactive components, the as-prepared composite displayed superior electrochemical performance with high capacity and rate capability. Moreover, it showed stable cycling performance and a capacity of 832 mAhg(-1) even after 50 discharge/charge cycles. The ionic transfer kinetics were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The cycled electrodes were also carefully examined to explain the origin of the enhanced performance. With a superb electrochemical performance and facile fabrication route, the freestanding CoO/Cu2O composites have a promising future as next-generation anodes for lithium-ion batteries.

Facile and Large-Scale Fabrication of Hierarchical Znfe2o4/Graphene Hybrid Films As Advanced Binder-Free Anodes for Lithium-Ion Batteries

Electrophoretic Deposition of Hierarchical Co3o4@Graphene Hybrid Films As Binder-Free Anodes for High-Performance Lithium-Ion Batteries

Smartly Designed Hierarchical Mno2@Fe3o4/Cnt Hybrid Films As Binder-Free Anodes For Superior Lithium Storage

Ultra-small and Highly Crystallized ZnFe2O4 Nanoparticles Within Double Graphene Networks for Super-Long Life Lithium-Ion Batteries

Green Fabrication of Sandwich-Like and Dodecahedral C@Fe3O4@C As High-Performance Anode for Lithium-Ion Batteries

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Self-supporting Co3O4/Graphene Hybrid Films As Binder-free Anode Materials for Lithium Ion Batteries

Self-Assembly Of A Znfe2o4/Graphene Hybrid And Its Application As A High-Performance Anode Material For Li-Ion Batteries

Hierarchical three-dimensional ZnCo 2O 4 nanowire arrays/carbon cloth anodes for a novel class of high-performance flexible lithium-ion batteries

Free-standing and binder-free lithium-ion electrodes based on robust layered assembly of graphene and Co3O4 nanosheets.

Hierarchical Hybrid ZnFe2O4 Nanoparticles/reduced Graphene Oxide Composite with Long-Term and High-Rate Performance for Lithium Ion Batteries

Hierarchical urchin-like Fe2O3 structures grown directly on Ti foils for binder-free lithium-ion batteries with fast charging/discharging properties

Uniquely Arranged Graphene-on-graphene Structure As a Binder-Free Anode for High-Performance Lithium-Ion Batteries.

Preparation of Co3O4 Hollow Microsphere/graphene/carbon Nanotube Flexible Film As a Binder-Free Anode Material for Lithium-Ion Batteries

Self-Assembled Hierarchical MoO2/Graphene Nanoarchitectures and Their Application As a High-Performance Anode Material for Lithium-Ion Batteries

Facile Fabrication of Reduced Graphene Oxide Covered Znco2o4 Porous Nanowire Array Hierarchical Structure on Ni-Foam As A High Performance Anode for A Lithium-Ion Battery

Three-dimensional Core-Shell Fe2O3 @ Carbon/carbon Cloth As Binder-Free Anode for the High-Performance Lithium-Ion Batteries

Electrospinning ZnO/carbon Nanofiber As Binder-Free and Self-Supported Anode for Li-ion Batteries

Synthesis of interconnected mesoporous ZnCo2O4 nanosheets on a 3D graphene foam as a binder-free anode for high-performance Li-ion batteries

Hierarchical Shell/core CuO Nanowire/carbon Fiber Composites As Binder-Free Anodes for Lithium-Ion Batteries

In Situ Fabrication of Hierarchical Porous CoO/Cu2O Composites on Cu Foam As High‐Performance Freestanding Anodes for Lithium–Ion Batteries