Defect Evolution and Mitigation in Metal Extrusion Additive Manufacturing: from Deposition to Sintering
Sajad Hosseinimehr,Ahmad Mohammadpanah,Michael J. Benoit,David F. Ester,Andrew Zang,Mark Martinez,Xiaoliang Jin,Adam T. Clare
DOI: https://doi.org/10.1016/j.jmatprotec.2024.118457
IF: 6.3
2024-05-27
Journal of Materials Processing Technology
Abstract:Material extrusion additive manufacturing of metals has found widespread application and is typically thought of as a facile technique to create metal components. This can be undertaken without the need for energy sources typically used in direct energy deposition and powder bed fusion processes. Despite recent advances in achieving net shape and improvements to material/component integrity, these processes are characterized by performance limiting defects which often emerge as a result of deposition strategy and are retained post sintering. Although the debinding and sintering steps have been investigated for metal injection molding technology, quantitative studies of defect evolution are lacking. This work proposes an approach to study the pore evolution behavior from deposition to sintering through X-ray Computed Tomography (XCT) image processing. Quantitative results of pore shrinking, partial and full closure through backtracking of individual pores from the sintered to the green state are presented. It is shown that where pores are larger than 4 × 10 -6 mm 3 , equals to the D 90 of the feedstock metal particles, these cannot be fully closed upon sintering and will survive to limit the performance of the final part. The average pore shrinkage is by a factor of 5.6 and partial closure happens in pores with minimum Feret diameter of 33 μm, equals to 160% of the D 90 powder particle, or less. The utilization of overfill as a proposed technique in the literature for the elimination of macro pores is investigated, yielding disparate and unsatisfactory results. This discrepancy can be attributed to the insufficient formation of micro-channels within the pore structure during the deposition process of the aqueous feedstock, leading to regions of weak grain bonding. To evaluate the contribution of these to undermining material integrity, tensile tests of linear and circular deposition strategies are undertaken. Experiments show that track interface length plays a major role in determining elongation to failure and tensile strength. It is concluded that the limitation to the mechanical properties of metal paste extrusion components originates from the emergence of defects and their characteristics after the completion of the processing, as opposed to being influenced by the metallurgy prior or post sintering.
materials science, multidisciplinary,engineering, manufacturing, industrial