Abstract:Standards and Codes of Practice for designing new constructions and for assessing and strengthening existing ones are usually based on uniform hazard maps, where different Limit States (LSs) are associated with different hazard-exceedance probabilities. This approach yields non-homogeneous LS-exceedance probabilities across a territory, thus failing to achieve the goal of uniform risk throughout a territory. Such lack of uniformity stems from estimating the probability of failure using capacity and demand models. If the capacity of new constructions-or the capacity increase of strengthened existing constructions-are designed based on a prescribed hazard-exceedance probability, then the seismic risk depends on both the structure (depending on the design philosophy and corresponding design objectives), through the capacity model, and the location, through the hazard model. The aim of this study is threefold. First, it provides a seismic probability assessment formulation and a risk-targeted intensity measure based on a linear model in log-log coordinates of the hazard, under the assumption of log-normal capacity and demand. The proposed framework introduces a factor that multiplies the code hazard-based demand to account either for intentional (from design) over-capacity or for undesired (e.g., in existing constructions) under-capacity. Second, this paper shows an application to peak ground accelerations in Europe considering parameters taken from Standards and Codes of Practice. The developed framework is used to determine the risk-target levels of peak ground acceleration used for design in Europe, for both new and existing constructions. Third, the obtained target risk levels are used to determine a risk-based intensity modification factor and a risk-based mean return period modification factor, which can be readily implemented in current Standards to achieve risk-targeted design actions, with equal LS-exceedance probability across the territory. The framework is independent of the chosen hazard-based intensity measure, be it the commonly used peak ground acceleration or any other measure. The results highlight that in large areas of Europe the design peak ground acceleration should be increased to achieve the proposed seismic risk target and that this is particularly significant for existing constructions, given their larger uncertainties and typical low capacity with respect to the code hazard-based demand.

Correlation in Spectral Accelerations for Earthquakes in Europe

Spectrum-consistent Ag-Based Fragility Curves

Inelastic Yielding Strength Demand Coefficient Spectra

Spatial correlation assessment of multiple earthquake intensity measures using physics-based simulated ground motions

A New Spatial Variation Model for Ground-Motion Intensities Combined with Correlation and Coherency

Conditional Mean Spectrum of Aftershocks

Exploring the impact of spatial correlations of earthquake ground motions in the catastrophe modelling process: a case study for Italy

Evaluation of the Inter-frequency Correlation of New Zealand CyberShake Crustal Earthquake Simulations

A New Energetic Based Ground Motion Selection and Modification Algorithm

High Resolution Long- and Short-Term Earthquake Forecasts for California

Empirical Correlations between Cumulative Absolute Velocity and Amplitude-Based Ground Motion Intensity Measures

Towards risk-targeted seismic hazard models for Europe

Modelling Evolutionary Power Spectral Density Functions of Strong Earthquakes Via Copulas

Magnitude Uncertainties Impact Seismic Rate Estimates, Forecasts and Predictability Experiments

Adaptively Smoothed Seismicity Earthquake Forecasts for Italy

Correlation and Joint Distribution of Spectral Accelerations of Vertical Ground Motions

Utility of Stochastic Ground Motion Models in Conditional Spectrum-Based Selection Consistent with the Causal Earthquakes

Ground-motion models for earthquakes occurring in the United Kingdom

GENERATION AND APPLICATION OF THE UNIFORM HAZARD SPECTRUM AND THE CONDITIONAL MEAN SPECTRUM BASED ON GROUND MOTION SIMULATION

Mean-to-median spectral acceleration ratios in Senior Seismic Hazard Analysis Committee Level 3 probabilistic seismic hazard analyses: An analysis of reported results

Investigating the sensitivity of losses to time-dependent components of seismic risk modeling