Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Study of CuO–SnO2 heterojunction nanostructures for enhanced CO gas sensing properties

High Performance Gas Sensor Based on ZnO/CuO Heterostructures

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Performances of In-doped CuO-based heterojunction gas sensor

Modulating Gas Sensing Properties of CuO Nanowires Through Creation of Discrete Nanosized P-N Junctions on Their Surfaces.

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Preparation and gas-sensitive properties of hollow Zn2SnO4/SnO2 nano-cubes

CO gas sensors based on p-type CuO nanotubes and CuO nanocubes: Morphology and surface structure effects on the sensing performance

Three-dimensional Hierarchical CuO Gas Sensor Modified by Au Nanoparticles

Enhanced H 2 S Gas Sensing Performance of SnO 2 /BaSnO 3 Heterostructures

An Organometallic Chemistry-Assisted Strategy for Modification of Zinc Oxide Nanoparticles by Tin Oxide Nanoparticles: Formation of N-N Heterojunction and Boosting NO2 Sensing Properties

Fabrication of Heterostructured P-Cuo/n-sno2 Core-Shell Nanowires for Enhanced Sensitive and Selective Formaldehyde Detection

Cu-doped flower-like SnO2 architecture toward promoting SO2 detection: Fast equilibrium and low trace monitoring

Studies on Sensing Properties and Mechanism of CuO Nanoparticles to H2S Gas

Humidity-independent gas sensor based on Pt/SnO 2 /NiO with advanced CO sensing capabilities

Gas Sensing Selectivity of SnO 2 -xNiO Sensors for Homogeneous Gases and its Selectivity Mechanism: Experimental and Theoretical Studies

Enhanced Gas Selectivity Induced by Surface Active Oxygen in SnO/SnO2 Heterojunction Structures at Different Temperatures

Hydrogen gas sensor based on SnO<sub>2</sub> nanospheres modified with Sb<sub>2</sub>O<sub>3</sub> prepared by one-step solvothermal route

SnO2 Highly Sensitive CO Gas Sensor Based on Quasi-Molecular-Imprinting Mechanism Design

One-Dimensional Zinc Oxide Decorated Cobalt Oxide Nanospheres for Enhanced Gas-Sensing Properties