Abstract:Anion exchange membranes (AEMs) based diffusion dialysis (DD) is considered as a promising process for acid recovery from industrial acid wastewater due to its low energy consumption, easy installation protocol, and less operating cost. The driving force produced by the concentration difference between the feed side and dialysate side (usually is water) stimulates the separation of acids from salts in acid effluents (a spent liquor HCl/FeCl2 generated from steel refining industry). In this work, we prepared low cost, highly productive and self-organized nanostructured AEMs for acid recovery via DD. The AEMs were designed by introducing the quaternary ammoniums with long hydrophilic side chains into the hydrophobic poly(2,6-dimethyl-1,4-phenylene oxide) main chains, where the self-organized nanostructure was constructed through hydrophilic and hydrophobic microphase separation behavior. Afterwards, the thermo-crosslinking of -CH2Br segments put in order the nanostructures to cramp the active transport of the Fe2+ ions to improve the selectivity. The H-1 NMR, XPS, in-situ FTIR and AFM techniques confirmed the reaction progress and micro-topography of the prepared AEMs, respectively. Consequently, from the DD results, the hydrophilic side chains were imperative to achieve high acid flux and the thermal crosslinking attuned the channels to promote the selectivity between the acid and salt. At 25 degrees C, the AEMs (except for QPPO-1.0 membrane) showed higher H+ dialysis coefficients (U-H) ranged from 0.013 to 0.059 m h(-1), and outstanding separation factors (S) from 19 to 197. The observed results were high as compared with a commercial membrane DF-120 (U-H = 0.009 m h(-1), S = 18.5) and some recently reported membranes for HCl/FeCl2 solution.

Facile preparation of 1,8-Diazabicyclo[5.4.0]undec-7-ene based high performance anion exchange membranes for diffusion dialysis applications

Facile Preparation of Novel Cardo Poly(oxindolebiphenylylene) with Pendent Quaternary Ammonium by Superacid-Catalysed Polyhydroxyalkylation Reaction for Anion Exchange Membranes

Preparation of diffusion dialysis membrane for acid recovery via a phase-inversion method

Cationic Covalent Organic Framework Membranes with Stable Proton Transfer Channel for Acid Recovery

Facile Synthesis of Pyridinium Functionalized Anion Exchange Membranes for Diffusion Dialysis Application

Preparation of pyrrolidinium-based anion-exchange membranes for acid recovery via diffusion dialysis

Prepared poly(aryl piperidinium) anion exchange membranes for acid recovery to improve dialysis coefficients and selectivity

A simple method to prepare anion exchange membrane by PVA/EVOH/MIDA for acid recovery by diffusion dialysis

High Performance Anion Exchange Membrane with Proton Transport Pathways for Diffusion Dialysis

In-situ cross-linked porous anion exchange membranes with high performance for efficient acid recovery

Self-organized Nanostructured Anion Exchange Membranes for Acid Recovery

Porous Anion Exchange Membrane for Effective Acid Recovery by Diffusion Dialysis

Advanced Charged Porous Membranes with Ultrahigh Selectivity and Permeability for Acid Recovery

Novel Composite Anion Exchange Membranes Based on Quaternized Polyepichlorohydrin for Electromembrane Application

Excellent dimensional stability anion exchange membrane based on PVA/EVOH/PyPECH for acid recovery by diffusion dialysis

Novel synthetic route to prepare doubly quaternized anion exchange membranes for diffusion dialysis application

Porous Diffusion Dialysis Membranes for Rapid Acid Recovery

Covalently Cross-Linked Pyridinium Based AEMs with Aromatic Pendant Groups for Acid Recovery Via Diffusion Dialysis

In-situ crosslinked AEMs with self-assembled nanostructure for acid recovery

Improved Acid Recovery Performance by Novel Poly(DMAEM-co-γ-MPS) Anion Exchange Membrane Via Diffusion Dialysis

Preparation of a Novel Hollow-Fiber Anion-Exchange Membrane and Its Preliminary Performance in Diffusion Dialysis