Abstract:A new zirconium oxide-based media for arsenate removal from water was fabricated and evaluated in batch and continuous flow experiments. Highly porous (epsilonp approximately 0.9) nanostructured zirconium oxide spheres were fabricated by the impregnation of macroporous ion-exchange media (CalRes 2103, Calgon) with zirconium salt; the media was then ashed at T > 750 +/- 50 degrees C to remove the organic polymer resin and obtain ZrO2 spheres. The spheres generally ranged from 200 to 800 microm in diameter, and consisted of ZrO2 nanoastructures generally ranging between 20 and 100 nm. They also exhibited monoclinic and tetragonal crystalline structures, and had an isoelectric point of 5.6. Equilibrium batch experiments were conducted in 10 mM NaHCO3 buffered nanopure water at three pH values (6.4,7.3, and 8.3) with 120 microg/L As(V). Data were fit with the Freundlich isotherm equation (q(e) = Kx CE(1/n)), resulting in an intensity parameter (1/n) of approximately 0.33 and capacity parameters (K) ranging from 115 to 400 (microg As(V) g(-1) dry media)(L microg(-1))1/n. The pore diffusion coefficient and toruosity were estimated to be 6.4 x 10(-6) cm2 s(-1) and 1.3, respectively. For a packed bed adsorbent operating at a loading rate of 11.5 m3 m(-2) hr(-1) in a realistic continuous flow experiment, the external mass transport coefficient was estimated to be kf approximately 6.3 x 10(-3) cm s(-1). The pore diffusion coefficient and the external mass transport coefficient were used with the pore surface diffusion model (PSDM) to predict the arsenate breakthrough curve. A short bed adsorbent (SBA) test was conducted under the same conditions to validate the model. In this study, surface diffusion was ignored because the particles have a very high porosity. The validated model was used to predict arsenate breakthrough in a simulated full-scale system. The overall combined use of modeling, material characterization, equilibria, and kinetics tests determined the suitability of the media for arsenate treatment cheaper, easier, faster, and with less media than a long duration pilot test would have. Although the fabricated zirconium oxide spheres exhibited adsorption capacity comparable to some commercially available media such as iron based (hydr)oxides, the high cost of fabrication may render the media not feasible for wide use in commercial applications. However, the very high porosity of this media provides for improved pore diffusion and faster overall mass transport, which may be critical for applications where mass transport is the limiting factor.

A Novel Zr-based Nanoparticle-Embedded PSF Blend Hollow Fiber Membrane for Treatment of Arsenate Contaminated Water: Material Development, Adsorption and Filtration Studies, and Characterization

Performance of an optimized Zr-based nanoparticle-embedded PSF blend hollow fiber membrane in treatment of fluoride contaminated water

Porous Biochar-Supported MnFe2O4 Magnetic Nanocomposite As an Excellent Adsorbent for Simultaneous and Effective Removal of Organic/inorganic Arsenic from Water

Humic Acid Modified Selective Nanofiltration Membrane for Efficient Separation of PFASs and Mineral Salts

One-step construction of hierarchical porous channels on electrospun MOF/polymer/graphene oxide composite nanofibers for effective arsenate removal from water

Influence of Pore Size and Membrane Surface Properties on Arsenic Removal by Nanofiltration Membranes

Study of Inorganic Matter and Organic Matter Affecting Pentavalent Arsenic Removal by Nanofiltration

Hybrid Manganese/quartz Sand Filtration—nanofiltration Processes for the Removal of Arsenic in Water

Arsenic Removal from Drinking Water by Self-Made PMIA Nanofiltration Membrane

Arsenate removal by nanostructured ZrO2 spheres

Enhanced arsenite removal from water using zirconium-ferrocene MOFs coupled with peroxymonosulfate:oxidation and multi-sites adsorption mechanism

Developing new adsorptive membrane by modification of support layer with iron oxide microspheres for arsenic removal.

A Novel Homogenous In-Situ Generated Ferrihydrite Nanoparticles/polyethersulfone Composite Membrane for Removal of Lead from Water: Development, Characterization, Performance and Mechanism

Effects of ion concentration and natural organic matter on arsenic(V) removal by nanofiltration under different transmembrane pressures.

Removal Technology and Mechanism of Arsenic From Wastewater by Zeolite Imidazole Framework-8@Carbon Nanodots

Simultaneous removal of arsenate and arsenite in water using a novel functional halloysite nanotube composite

Development of a Novel Biochar/psf Mixed Matrix Membrane and Study of Key Parameters in Treatment of Copper and Lead Contaminated Water

Understanding the Process in the Removal of Dimethylarsenic by a Zirconium-Based Nanoparticle

Effective removal of arsenite from water using polylactic acid ZIF-8 biocomposite nanofiber

A Gel Resin-supported Nano-hydrated Iron Oxide for Arsenate Sorption from Water

Efficient arsenic(V) removal from water by ligand exchange fibrous adsorbent