Abstract:This work investigates the heterogeneous deformation and failure of HR3C austenitic stainless steel welded joints at room and typical service temperatures. Such types of welded joints are widely used in the new generation of fossil fuel power stations and are known to suffer from premature high temperature failure. Observation of in-service failures revealed that cracks may nucleate either in the heat affected zone or in the weld metal. The main objective of this work is to identify the local microstructural conditions and stress–strain fields responsible for both ductile failure and micro-crack nucleation within the weldment at low and high temperatures, respectively. To that purpose, a novel multi-scale micromechanics-based modelling framework is proposed. It relies on representative weld microstructure models digitally reconstructed from EBSD measurements, and dislocation density-based crystal plasticity models to describe the behaviour of individual grains in each weld region. A novel thermo-dynamically consistent relation for the configuration stored energy per unit volume is derived from the crystal plasticity framework. The single crystal models are calibrated and validated from a combination of uniaxial tensile tests on cross-weld specimens using high resolution digital image correlation techniques, representative volume elements of the polycrystals at the macro-scale, as well as micropillar compression tests at the scale of the individual grains. Predictions of heterogeneous inelastic deformation fields within the weldment at both 22 °C and 665 °C, and of micropillar compression behaviour of the individual weld single crystal phases are consistent with experimental data. The experimentally observed ductile failure of the weld metal at room temperature is successfully predicted using a Gurson-type void nucleation, growth and coalescence constitutive model. The suitability of the stored strain energy density and the accumulated plastic strain as crack initiation/creep failure indicators is investigated. It was found that predicted creep lifetimes with either indicator were very similar, and that they were relatively accurate for low stress levels.

Microstructural Modelling of P91 Martensitic Steel under Uniaxial Loading Conditions

Computational Martensite Re-Orientation in Shape Memory Alloys and the Related Hysteretic Dynamics

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Microstructure-Based Multiscale Modeling of Deformation in MarBN Steel under Uniaxial Tension: Experiments and Finite Element Simulations

Microstructure-Based Modeling of Deformation in Steels Based on Constitutive Relationships from Micropillar Compression

Micro-mechanics investigation of heterogeneous deformation fields and crack initiation driven by the local stored energy density in austenitic stainless steel welded joints

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

A Hierarchical Theoretical Model for Mechanical Properties of Lath Martensitic Steels

Crystal plasticity modeling of grain boundary softening and fatigue in U75V pearlite steel under low strain conditions: A study of cyclic rolling contact fatigue

Understanding Microstructure-Evolution-dependent Fracture Behaviors in Pearlitic Steels

Combined crystal plasticity and grain boundary modeling of creep in ferritic-martensitic steels: I. Theory and implementation

Microstructure-informed, predictive crystal plasticity finite element model of fatigue-dwells

A Unique Numerical Iterative Approach for Modelling Individual Phase Stress-Strain Curves in Dual Phase Steel

A Microstructure-Based Constitutive Model Accounting for Rate Dependence of Superelastic NiTi Alloy under Cyclic Deformation

Phase-field finite element modelling of creep crack growth in martensitic steels

Physically-based modeling of cyclic softening and damage behaviors for a martensitic turbine rotor material at elevated temperature

Multiaxial non-proportional fatigue behaviour and microstructural deformation mechanisms of 9%Cr steel at elevated temperature

Microtomographic assessment of damage in P91 and E911 steels after long-term creep

Micro-thermomechanical Constitutive Model of Transformation Induced Plasticity and Its Application on Armour Steel

Crystal Plasticity Model Analysis for the Macro-to-Micro Mechanical Behavior of Different Sub-Regions in a Marine Steel Weld

Development of materials model based on microstructure evolution for formability analysis of low-Ni austenitic stainless steel