Polymer Electro-optic Switch Using Cross-coupling Five-serial-coupled Microring Resonator with Ultra-low Crosstalk

郑传涛,罗倩倩,孙长轮,杜巧玲,张大明,王一丁

DOI: https://doi.org/10.3788/gzxb20144303.0313001

2014-01-01

Abstract:A novel 2×2polymer electro-optic switch was optimized and simulated based on two-group five-serial-coupled microring resonator and their cross-coupling with two channel waveguides.Detailed structure,theory and formulation were available to characterize the output powers of the switch.For realizing boxlike spectrum(drop port)as well as low crosstalk and insertion loss,resonance order and coupling gaps were optimized.Analysis and simulation on output powers and output spectrum indicated that,a switching voltage of about 4.0Vwas desired to realize the exchange between cross-state and barstate;the crosstalk under cross state and bar state were extremely low as-66dB and-54.7dB, respectively;the insertion losses under the two operation states were 2.34dB and 0.24dB,respectively. For the drop port,the 10% ~90% rise time and fall time were estimated to be 15ps and 90ps, respectively,under the operation of 1GHz switching operation.The bending radius of each electro-optic polymer microring was as small as 19.45μm,leading to ultra-compact size of only 0.407mm in both length and width,which was nearly 1/10of the length of Mach-Zehnder interferometer or directional coupler type polymer electro-optic switches.Consequently,because of small footprint size and extremely low crosstalk,this switching configuration can be densely integrated onto optoelectronic chips,and thus it possesses potential applications in optical signal control in optical networks-on-chip.