Abstract:Interface characterizes describes how the atoms/molecules attach themselves to the solid/liquid interface from the liquid when the crystallization takes place, which plays a key role in revealing the kinetic mechanism during the crystal growth. For common non-facet/non-facet metallic systems, the kinetic undercooling is usually small and it becomes only significant when the growth velocity is high. However, high growth velocity can be usually realized under large undercooling condition. In this case, the interface temperature cannot be measured, thus the kinetic undercooling cannot be determined quantitatively either. Compared with the atom and small molecule materials, the polymer has its distinctive characteristic of different long chains, which are entangled together in a liquid state. Thus the crystallization of the polymer system usually proceeds in the two-dimensional manner, which provides an ideal way to obtain large kinetic undercooling under the small growth velocity condition. The directional crystallization technique has been widely adopted to study the scaling law of undercooling and growth velocity due to its accurate controlling of growth velocity and temperature gradient. Therefore, it offers an appropriate way to make a quantitative investigation. In this paper, the in-situ observations of the solidification of polyethylene glycol 6000 at different pulling velocities are performed and the interface temperature is examined as well by using the directional crystallization technique. The effect of the pulling rate on the growth kinetics is examined. The results reveal that the interface temperature decreases and the undercooling increases gradually with the pulling velocity increasing. A change in the growth regime is observed at Delta T = 1 3.5 K, where regime II-regime III transition occurs according to Hoffman's kinetic theory of polymer crystallization. The comparison of undercooling between the present work and DSC isothermal crystallization is made, and it shows that the data obtained in the directional growth and the isothermal growth follow the same trends but the undercooling in isothermal growth is larger than in directional growth under the same growth velocity. This indicates that the undercooling in the latter case is over-estimated since it contains the thermal undercooling. Undercooling is the driving force for crystallization, which usually includes solute undercooling, curvature undercooling, thermal undercooling, and kinetic undercooling. Because of the flat interface and the pure material, there is no solute undercooling nor curvature cooling in the present case. The thermal undercooling is also zero in the unidirectional crystallization process. Thus the total undercooling in the present work is the kinetic undercooling. The maximum kinetic undercooling reaches 20 K, indicating that the interface kinetic controlling growth takes place due to the two-dimensional nucleation in polymer.

Crystallization of Low Molecular Weight Poly(Ethylene Glycol) under Electric Fields

Polyvinylidene Fluoride (PVDF) Crystallization Kinetics in an Electric Field

Influence of Dc Electric Field on Both Crystalline Structure and Conductivity of Poly(Ethylene Oxide)10:Liclo4 Electrolyte

Thickening and Thining of Lamellar Crystals During Isothermal Crystallization of Low Molecular Weight Poly(ethylene Glycol)

External Field Induced Crystallization of Poly(3-Dodecylthiophene)

Protein Crystallization Under Electric Field

Study on single crystals of butyl branched polyethylene in the presence of electric field

Studies on the Morphology Transition of Micro-Crystal Growth in Polymer Films in High Vacuum and Strong Electrostatic Field

Strong kinetic effect of polyethylene glycol 6000 under directional solidification condition

An Experimental Study of the Crystallinity of Different Density Polyethylenes on the Breakdown Characteristics and the Conductance Mechanism Transformation under High Electric Field

Memory Effect on Solution Crystallization of High Molecular Weight Poly(ethylene Oxide)

EFFECT OF ELECTROSTATIC FIELD ON MORPHOLOGY OF POLYPROPYLENE FILMS

The role of an applied electric field in protein crystallization at low temperature

Crystallization of Poly (ethylene Glycol) in Poly (methyl Methacrylate) Networks

Thermal analysis and non‐isothermal kinetics of poly(ethylene glycol) with different molecular weight

Effects of high-voltage electric field produced by an improved electrode system on freezing behaviors and selected properties of agarose gel

Study on Non-isothermal Crystallization and Phase Transition Behavior of Polyethylene Glycol by Raman Spectroscopy

The effect of electrostatic field on the micro-crystal morphology of polymer films

Dynamic Responses of a Thermotropic Main-Chain Liquid Crystalline Polyester during Polymerization under Electric Fields

Isothermal thickening and thinning processes in low molecular weight poly(ethylene oxide) fractions crystallized from the melt - Effects of molecular configurational defects on crystallization, melting, and annealing

Enhanced Electrocaloric Strength in P(VDF-TrFE-CFE) by Decreasing the Crystalline Size