Abstract:A novel radial sandwich radial bending composite transducer is proposed based on the increasing amplitude of bending waves in the structure of an acoustic black hole (ABH). The transducer consists of a radial sandwich circular ring transducer and an outer acoustic black hole structure. The existence of ABH structure realizes the conversion between radial vibration and bending vibration of the transducer, and improves the acoustic radiation performance of the transducer. Based on the onedimensional acoustic black hole bending vibration theory, the bending vibration equation of the annular ABH structure is given. An analytical model of ABH structure bending vibration was established by using the method of geometrical-acoustics, and the eigen frequency of its bending vibration was given. The relationship between the electromechanical conversion performance and the size of the transducer was discussed using finite element method, the results show that when the eigen frequency of the bending vibration of the ABH structure is close to the resonant frequency of the transducer, the electromechanical coupling coefficient of the transducer reaches the maximum value. The radiation sound pressure field, radiation sound intensity, and radiation directionality of the transducer in the air were also analyzed by the finite element method. The results indicate that the presence of ABH structure can improve the electromechanical conversion performance of the bending vibration of the transducer, enhance the acoustic radiation performance of the transducer, make the transducer exhibit radiation directionality and the lower order of the bending vibration mode of the ABH structure, the stronger radiation directionality of the transducer towards the left and right sides. Finally, we made a prototype transducer, in order to verify the accuracy of the simulation and theory, we carried out transducer electrical impedance experimental test and vibration mode test. The measured results are in good agreement with the simulation results. The displacement distribution of the radiation surface of the transducer at resonance frequency is measured, which verifies the bending vibration modes of the ABH structure. This type of transducer is expected to be used as acoustic projector in the air or water.

Radially Sandwiched Composite Transducers Composed of the Radially Polarized Piezoelectric Ceramic Circular Ring and Metal Rings

Radial vibration of piezoelectric/magnetostrictive composite hollow sphere

Lymphocystis in fish from East African lakes.

Parametric Analysis and Optimization of Radially Layered Cylindrical Piezoceramic/Epoxy Composite Transducers

Finite Element Analysis and Theoretical Model of Slotted Cymbal Composite Piezoelectric Transducer

Coupled vibration of a radially polarized piezoelectric cylinder with a co-axial elastic cylinder of varying height

Design of Radial Composite Longitudinal Vibration Piezoelectric Transducer Excited by Four Piezoelectric Stacks

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

A 2D Dual-Mode Composite Ultrasonic Transducer Excited by a Single Piezoceramic Stack

RADIAL VIBRATION OF ELASTO-PIEZOELECTRIC COMPOSITE CYLINDER WITH AN ISOTROPIC ELASTIC CORE

Analysis on coupled vibration of piezoelectric ceramic stack with two piezoelectric ceramic elements.

Fabrication of Radial Array Transducers Using 1-3 Composite via a Bending and Superposition Technique

Noise Enhanced $M$-ary Composite Hypothesis-Testing in the Presence of Partial Prior Information

Design of radial sandwich radial-bending composite transducer based on acoustic black hole theory

Large thoracic duct cyst - a case report and review of the literature.

Research on Effective Electric-Mechanical Coupling Coefficient of Sandwich Type Piezoelectric Ultrasonic Transducer Using Bending Vibration Mode

Design of Piezoelectric Ultrasonic Transducer Based on Doped PDMS

Study of 1-3-2 type piezoelectric composite transducer array

Wide band underwater acoustic transducer for stacked 2-2 piezoelectric composite material tube

Analysis of a Cascaded Piezoelectric Ultrasonic Transducer with Three Sets of Piezoelectric Ceramic Stacks

Design of a novel 2D ultrasonic transducer for 2D high-frequency vibration–assisted micro-machining