Abstract:Featured by extreme flexibility, hyper-redundant manipulators are gradually developed and applied to perform detection and maintenance tasks in confined on-orbit environments. However, its configuration planning is very challenging due to a large number of degrees of freedom. This paper proposes a simultaneous planning method considering both overall configuration and end pose for hyper-redundant manipulators. First, the end effector and intermediate universal joints of the hyper-redundant manipulator are selected as the follow-up controlled points. The corresponding active control points are freely set near the follow-up controlled points. Then, the Euclidean distance between the active control point and the follow-up controlled point is calculated. Combined with gradient projection method, the calculated Euclidean distance is taken as the objective function to be optimized. By adjusting the active control point and the scale factor of gradient projection method, the adjustment of follow-up controlled points (i.e. overall configuration and end pose) can be realized. What is more, this method can optimize its overall configuration to adjust the follow-up controlled points close to or far from the active control point to achieve other planning goals (i.e. obstacle avoidance, singularity avoidance and so on). Therefore, this method satisfies the requirements of simultaneous planning considering both overall configuration and end pose for hyper-redundant manipulators. Finally, the proposed simultaneous planning method is executed in physical experiment system. Results verify the effectiveness of the proposed method.

Simultaneous repetitive motion planning of two redundant robot arms for acceleration-level cooperative manipulation

Distributed Cooperative Motion Planning for Multiple Articulated Robots

Smooth Joint Motion Planning for Redundant Fiber Placement Manipulator Based on Improved RRT*

Visualized Trajectory Planning of Flexible Redundant Robotic Arm Using A Novel Hybrid Algorithm

A new discrete-time repetitive motion planning scheme based on pseudoinverse formulation for redundant robot manipulators with joint constrains

A Pseudo-Inverse Redundancy-Based Resolution Scheme at the Acceleration Level to Control Robotic Arm Motion

Simultaneous Planning Method Considering Both Overall Configuration and End Pose for Hyper-Redundant Manipulators

A Spatial Path Following Method for Hyper-Redundant Manipulators by Step-by-Step Search and Calculating

Research on Collaboration Motion Planning Method for a Dual-Arm Robot Based on Closed-Chain Kinematics

A Kinematics Control Scheme of Redundant Manipulators Under Unknown Loads or External Forces

Motion Planning of Redundant Robotic Arm Based on Human Arm Motion Principles

Bidirectional RRT*-Based Path Planning for Tight Coordination of Dual Redundant Manipulators

Coordinated motion planning of the mobile redundant manipulator for processing large complex components

A unified dynamic control method for a redundant dual arm robot

An Analytical Solution for Inverse Kinematics of SSRMS-Type Redundant Manipulators

Toward coordinated planning and hierarchical optimization control for highly redundant mobile manipulator

Dual-arm cooperative manipulation under joint limit constraints

A Multi-Priority Control of Asymmetric Coordination for Redundant Dual-Arm Robot

Inverse kinematics and planning/control co-design method of redundant manipulator for precision operation: Design and experiments

Collective Neural Dynamics for Sparse Motion Planning of Redundant Manipulators Without Hessian Matrix Inversion

Motion Planning Of Hyper Redundant Manipulators Based On A New Geometrical Method