Abstract:This work describes a novel finite strain hypo-elastic formulation for amorphous thermoset polymers working in the glassy regime. The constitutive formulation is able to describe time and pressure-dependent behaviour under loading rates ranging from quasi-static to impact-type loading conditions and to account for thermo-mechanical coupling effects. A non-linear pressure dependent potential function is introduced to capture the non-associative visco-plastic potential flow for volumetric plastic strain control. The formulation also incorporates an internal state or deformation resistance variable to enable the description of the polymer hardening - softening behaviour, as well as a novel relation for the dissipative fraction of the plastic work in terms of the equivalent accumulated plastic strain. The constitutive model is formulated within a finite strain kinematics framework, and full details of its numerical implementation into the finite element method using a fully implicit Euler Backward algorithm are given. Model calibration is carried out for three different thermosetting resins (PR520 and RTM6 Epoxies, and MMA adhesives).To illustrate the model capabilities, two case studies are investigated: (i) the de-formation behaviour of epoxy under moderate and impact-type loading conditions under isothermal and fully adiabatic conditions, and (ii) the fracture behaviour of adhesive layers used to bond stiff metallic substrates. Results on RTM6 epoxy show that at, e.g., 60% true strain, 48.5% of the rate of plastic work is dissipative, and that the corresponding predicted increase in temperature due to the locally dissipated heat is consistent with published calorimetry data on a similar thermoset polymer. It was also found that, by coupling the proposed constitutive model with a cohesive zone model, it was possible to predict accurately the effect of an MMA adhesive layer thickness and pressure-dependency on the growth of an interfacial crack between the MMA adhesive and the metallic substrates. The proposed model should constitute a generic phenomenological formulation for the mechanical behaviour prediction of a wide range of thermoset polymers under confined and quasi-adiabatic conditions such as in composites and adhesive joints.

Temperature- and Strain Rate-Dependent Constitutive Modeling of the Large Deformation Behavior of A Transparent Polyurethane Interlayer

Temperature and strain rate dependent large tensile deformation and tensile failure behavior of transparent polyurethane at intermediate strain rates

A Constitutive Model for Strain Hardening Behavior of Predeformed Amorphous Polymers: Incorporating Dissipative Dynamics of Molecular Orientation

Temperature and strain rate dependent tensile behavior of a transparent polyurethane interlayer

Thermomechanical Coupling in Glassy Polymers: an Effective Temperature Theory

A Finite Deformation Fractional Viscoplastic Model for the Glass Transition Behavior of Amorphous Polymers

Experimental Investigation on the Tensile Behavior of a Transparent Polyurethane Interlayer

Numerical Implementation of Strain Rate Dependent Thermo Viscoelastic Constitutive Relation to Simulate the Mechanical Behavior of PMMA

A Visco-Elastoplastic Constitutive Model for Large Deformation Response of Polycarbonate over a Wide Range of Strain Rates and Temperatures

Strain Hardening Behaviors and Mechanisms of Polyurethane under Various Strain Rate Loading

Constitutive Modeling of the Tensile and Compressive Deformation Behavior of Polyurea over a Wide Range of Strain Rates

Constitutive modeling of polycarbonate over a wide range of strain rates and temperatures

Thermomechanical coupling during large strain deformation of polycarbonate: Experimental study

Experimental Investigation and Modeling of Mechanical Behaviors of Polyurea over Wide Ranges of Strain Rates and Temperatures

A Bilinear Constitutive Response for Polyureas As A Function of Temperature, Strain Rate and Pressure

Research on Temperature and Strain Rate Dependent Viscoelastic Response of Polyvinyl Butaral Film

A Finite Deformation Formulation for Amorphous Glassy Polymers under Moderate and Impact Strain Rates: Application to Adhesive Films

Mechanical Behaviors and Equivalent Configuration of a Polyurea under Wide Strain Rate Range

Constitutive Modelling of Polycarbonate at Low, Moderate and High Strain Rates

Thermomechanical Modeling of Amorphous Glassy Polymer Undergoing Large Viscoplastic Deformation: 3-Points Bending and Gas-Blow Forming

Dynamic Mechanical Response, Energy Absorption Capacity, and Constitutive Modeling of Polypropylene Fiber-Reinforced Foamed Concrete under High Temperature