Abstract:The elastic properties of 1D nanostructures such as nanowires are often measured experimentally through actuation of the nanowire at its resonance frequency, and then relating the resonance frequency to the elastic stiffness using elementary beam theory. In the present work, we utilize large scale molecular dynamics simulations to report a novel beat phenomenon in [110] oriented Ag nanowires. The beat phenomenon is found to arise from the asymmetry of the lattice spacing in the orthogonal elementary directions of the [110] nanowire,i.e., [-110] and [001] directions, which results in two different principal moments of inertia. Because of this, actuations imposed along any other direction are found to decompose into two orthogonal vibrational components based on the actuation angle relative to these two elementary directions, with this phenomenon being generalizable to <110> FCC nanowires of different materials (Cu, Au, Ni, Pd and Pt).The beat phenomenon is explained using a discrete moment of inertia model based on the hard sphere assumption, the model is utilized to show that surface effects enhance the beat phenomenon, while the effect is reduced with increasing nanowires cross-sectional size or aspect ratio.Most importantly, due to the existence of the beat phenomena, we demonstrate that in resonance experiments only a single frequency component is expected to be observed, particularly when the damping ratio is relatively large or very small.Furthermore, for a large range of actuation angles, the lower frequency is more likely to be detected than the higher one,which implies the experimental predictions of Young's modulus obtained from resonance may in fact be under predictions. The present study therefore has significant implications for experimental interpretations of Young's modulus as obtained via resonance testing.

Resonance Frequency Distribution of Cantilevered (5,5)(10,10) Double-Walled Carbon Nanotube with Different Intertube Lengths

Size effect on transverse free vibrations of ultrafine nanothreads

Tuning the Resonance Properties of 2D Carbon Nanotube Networks Towards a Mechanical Resonator

How Gaseous Environment Influences a Carbon Nanotube-Based Mechanical Resonator

General Existence of Flexural Mode Doublets in Nanowires Targeting Vectorial Sensing Applications

Transverse vibrations of double-walled carbon nanotubes under compressive axial load

Beat Phenomena in Metal Nanowires, and Their Implications for Resonance-Based Elastic Property Measurements.

Thermal Effect on Transverse Vibrations of Double-Walled Carbon Nanotubes

Coupled Thermomechanics Of Single-Wall Carbon Nanotubes

Transversally and axially tunable carbon nanotube resonators in situ fabricated and studied inside a scanning electron microscope.

Investigation of the Fundamental Frequency of Double Walled Carbon Nanotubes Using Molecular Mechanics Approach by an Averaging Van Der Waals Forces Modeling

On the vibrational behavior of the conventional and hetero-junction carbon nanotubes

Vibration of Multi-Walled Carbon Nanotubes with Initial Axial Loading

The Cohesive Energy and Vibration Characteristics of Parallel Single-Walled Carbon Nanotubes

Beam to String Transition of Vibrating Carbon Nanotubes Under Axial Tension

Structure-preserving analysis on chaotic characteristics of transverse vibration for embedded double-walled carbon nanotube

Raman Characterization and Tunable Growth of Double-Wall Carbon Nanotubes

A Non-Linear Spring Model for Predicting Modal Behavior of Oscillators Built from Double Walled Carbon Nanotubes

The Origin of Self-Excited Oscillation of Double-Walled Carbon Nanotubes

Carbon nanotubes as ultra-high quality factor mechanical resonators

Remarkable Influence of Slack on the Vibration of a Single-Walled Carbon Nanotube Resonator.