Abstract:Laboratory experiments were carried out using two identical bioreactors to investigate the effect of feeding alkalinity and pH on the formation of aerobic sludge granules in wastewater treatment. Both bioreactors, of 2.4L each in working volume and seeded with activated sludge, were operated as sequencing batch reactors (SBR) and fed at the same rate with a glucose-based synthetic wastewater. The first SBR, with a low alkalinity of 28.7mg CaCO3/L in the influent, had a pH of about 3.0 in the reactor and achieved rapid formation of fungi-dominating granules in 1 week. The second SBR, with a high alkalinity of 301mg CaCO3/L from the addition of 440mg NaHCO3/L to the influent, maintained a reactor pH of around 8.1 and had a slower formation of bacteria-dominating granules, taking about 4 weeks. After granulation, both reactors performed well in organic degradation and sludge–liquid separation. However, according to examinations carried out using scanning electronic microscopy (SEM) and confocal laser scanning microscopy (CLSM), the mature fungal granules with a mean size of 7.0mm had a loosely packed fluffy structure. Both fungi and extracellular polymeric substances (EPS) were distributed uniformly throughout the granules. The bacterial granules were smaller, with a mean size of 4.8mm and a compact structure. EPS were distributed throughout and bacteria were mainly situated in the outer layer of the mature granules. Granulation of fungal sludge could be completed more rapidly than bacterial granulation. However, fungal granules were apparently weaker in structure and subject to more breakage and erosion than bacterial granules in aeration turbulence. The results suggest that by controlling the feeding alkalinity and reactor pH, a strategy of species selection can be developed for aerobic sludge granulation at different rates with different microbial communities and structural features.

Formation of Bacterial Aerobic Granules: Role of Propionate

Characterization of aerobic granules formed in an aspartic acid fed sequencing batch reactor under unfavorable hydrodynamic selection conditions

Formation of filamentous aerobic granules: role of pH and mechanism

Morphological and Structural Characteristics of Aerobic Granulation

Anaerobic Granule-Based Biofilms Formation Reduces Propionate Accumulation under High H 2 Partial Pressure Using Conductive Carbon Felt Particles

Evolution of Microbial Community and Key Genera in the Formation and Stability of Aerobic Granular Sludge under a High Organic Loading Rate

Accelerated Aerobic Granulation Using Alternating Feed Loadings: Alginate-Like Exopolysaccharides.

Aerobic Granulation of Aggregating Consortium X9 Isolated from Aerobic Granules and Role of Cyclic Di-Gmp

Formation and characterisation of fungal and bacterial granules under different feeding alkalinity and pH conditions

Formation of aerobic granules and their PHB production at various substrate and ammonium concentrations.

Microbial Communities of Aerobic Granules: Granulation Mechanisms.

Granule-based anaerobic biofilm enhances propionic acid degradation under high H2 partial pressure

Calcium Precipitate Induced Aerobic Granulation

Formation of Artificial Granules for Proving Gelation As the Main Mechanism of Aerobic Granulation in Biological Wastewater Treatment.

Cultivation of aerobic granules for polyhydroxybutyrate production from wastewater.

Effects of Extracellular Polymeric Substances on Aerobic Granulation in Sequencing Batch Reactors

Formation of Aerobic Granules with Domestic Sewage

Aerobic Granulation in a Sequencing Batch Reactor for the Treatment of Piggery Wastewater

Multiple extracellular polymeric substances pathways expressed by Accumulibacter and the flanking community during aerobic granule formation and after influent modification

A Potential Explanation for the Effect of Carbon Source on the Characteristics of Acetate-Fed and Glucose-Fed Aerobic Granules

Role of Extracellular Protein in the Formation and Stability of Aerobic Granules