Abstract:Dynamic mechanical relaxation processes of amorphous alloys are very important to understand plastic deformation, glass transition phenomenon, diffusion behavior and crystallization. How to establish the correlation between mechanical properties and mechanical relaxation modes is one of key issues. In the current research, with the help of dynamic mechanical analysis (DMA), dynamic mechanical behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ bulk metallic glass from room temperature to supercooled liquid region was probed. In parallel, based on the uniaxial tensile tests, high-temperature flow behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass around glass transition temperature were investigated. Dynamic mechanical behavior and high temperature deformation behavior were discussed in the framework of quasi-point defects theory. The results demonstrated that main $\alpha $ relaxation process of metallic glass can be well described by the quasi-point defects theory. Based on internal friction of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass, activation energy of elementary movement of atoms $U_\beta$ is 0.63 eV. In addition, correlation factor $\chi $ corresponding to concentration of the quasi-point defects in solid glass remains almost constant below the glass transition temperature. When the temperature above the glass transition temperature, the correlation factor $\chi $ increases by increasing the temperature (below the crystallization temperature). Finally, high temperature flow behavior in tensile mode near the glass transition temperature of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass was studied. The normalized viscosity decreases with increasing strain rate at low temperatures or high strain rates, indicating a non-Newtonian flow behavior. Whereas Newtonian flow behavior is observed at higher temperatures and lower strain rates. The apparent viscosity is affected by temperature and strain rate. High-temperature flow behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass was described by stretched exponential function and free volume theory. Specifically, experimental master curve of the high temperature flow behavior of metallic glass is in good agreement with the prediction of the quasi-point defects theory, which provides a new insight on understanding of viscous effects during high temperature deformation of solid glasses.

Main (α) relaxation and excess wing in Zr 50 Cu 40 Al 10 bulk metallic glass investigated by mechanical spectroscopy

Mechanical Relaxation Behavior of Zr64.13Cu15.75Ni10.12Al10 Bulk Metallic Glass

Mechanical Relaxation In A Zr-Based Bulk Metallic Glass: Analysis Based On Physical Models

Mechanical Relaxation of a Ti 36.2 Zr 30.3 Cu 8.3 Fe 4 Be 21.2 Bulk Metallic Glass: Experiments and Theoretical Analysis

Main α relaxation and slow β relaxation processes in a La30Ce30Al15Co25 metallic glass

Relaxation of Ni-free Ti40Zr10Cu36Pd14 Bulk Metallic Glass under Mechanical Stress

Physical Aging Effects on the Dynamic Relaxation Behavior and Mechanical Properties of Cu46Zr46Al8 Metallic Glass

Dynamic Mechanical Relaxation in Zr65Ni7Cu18Al10 Metallic Glass

Relaxation of Internal Friction and Shear Viscosity in Zr57Nb5Al10Cu15.4Ni12.6 Metallic Glass

Main and Secondary Relaxations in an Au-Based Bulk Metallic Glass Investigated by Mechanical Spectroscopy

Characteristic of Dynamic Mechanical Relaxation Processes in Cu46Zr46Al8 and La43.4Ce18.6Ni24Al14 Metallic Glasses

DYNAMIC RELAXATION CHARACTERISTICS AND HIGH TEMPERATURE FLOW BEHAVIOR OF ZR-BASED BULK METALLIC GLASS

Dynamic Universal Characteristic of the Main (α) Relaxation in Bulk Metallic Glasses

Relaxation of Bulk Metallic Glasses Studied by Mechanical Spectroscopy

Thermal Effects and Evolution of the Defect Concentration Based on Shear Modulus Relaxation Data in a Zr-based Metallic Glass

Influence of Thermal Treatments and Plastic Deformation on the Atomic Mobility in Zr50.7Cu28Ni9Al12.3 Bulk Metallic Glass

Effects of Iron Addition on the Dynamic Mechanical Relaxation of Zr55Cu30Ni5Al10 Bulk Metallic Glasses

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

Dynamic Mechanical Analysis in La-based Bulk Metallic Glasses: Secondary (β) and Main (α) Relaxations

Visco-elasticity and mechanical relaxation behavior in La-based metallic glasses

The Excess Wing of Bulk Metallic Glass Forming Liquids