Abstract:More than 92% of rubidium resources on the earth exist in salt lake brine and underground brine. Rubidium in brine coexists with a large amount of potassium with very similar physical and chemical properties, making the extraction technology of rubidium extremely difficult, and a large amount of rubidium resources in brine have not been rationally utilized. Therefore, the development of a new type of high-selectivity rubidium-potassium separation extractant is of great significance to the establishment of efficient separation and extraction technology of rubidium. By modifying the structure of 4-tert-butyl-2-(α-methylbenzyl)phenol, the traditional rubidium extractant, the steric hindrance effect of tert-butyl is reduced and the reaction efficiency of rubidium and extractant is improved. A new extractant 4-ethyl-2-(α-methylbenzyl)phenol was obtained. The thesis carried out the research on the extraction and separation performance of potassium rubidium 4-ethyl-2-(α-methylbenzyl)phenol. The results show that the new extraction agent 4-ethyl-2-(α-methylbenzyl)phenol and potassium rubidium brine are extracted and separated with a ratio of 10:1. The minimum separation coefficient of rubidium potassium can reach 15 or more, showing excellent separation performance ; When the organic phase is composed of 0.8mol/L extractant and D60 solvent oil, the alkalinity of the aqueous phase is 0.5mol/L sodium hydroxide, and the extraction time is 3 minutes, the single-stage extraction rate of rubidium can reach more than 76.0%, rubidium potassium The separation coefficient can reach more than 26. After repeated use, the extraction rate of rubidium can be maintained above 73% and the separation coefficient of rubidium potassium can reach 23, without a significant drop. It provides a new way and idea for the extraction and separation technology of rubidium in high potassium brine.

Extraction of Rubidium by T-Bambp in Cyclohexane

Extraction of Cesium and Rubidium with 4-Tert-butyl-2- (Α-Methylbenzyl) Phenol from Salt Lake Brine

Study on Solvent Extraction Behavior of Rubidium by t-BAMBP-Sulphonated Kerosene System from Salt Lake Brine

Extraction of rubidium ion from brine solutions by dicyclohexano-18-crown-6 / ionic liquid system

Extraction equilibrium and thermodynamics of cesium with a new derivative of calix[4]biscrown

Study on the 4-ethyl-2(α-methyl benzyl) phenol Extraction-Separation Between Rubidium and Potassium

Preferential extraction of rubidium from high concentration impurity solution by solvent extraction and preparation of high-purity rubidium salts

Highly selective extraction of lithium ions from salt lake brines with sodium tetraphenylborate as co-extractant

Lithium Extraction from Salt Lake Brine with High Mass Ratio of Mg/Li Using TBP-DIBK Extraction System

Extraction of Lithium from Brine Containing High Concentration of Magnesium by Tri-N-Butyl Phosphate Dissolved in Kerosene

Extraction of Lithium from Salt Lake Brine with Tributyl Phosphate and an Ionic Liquid

Extraction of rubidium and cesium from brine solutions using a room temperature ionic liquid system containing 18-crown-6

Selective extraction of lithium ions from salt lake brines using a tributyl phosphate-sodium tetraphenyl boron-phenethyl isobutyrate system

Lithium and Magnesium Separation from Salt Lake Brine by Tributyl Phosphate under Action of Co-Extraction Reagent Clo4-

Screening diluents to optimize cesium contaminant separation using t-BAMBP extractant

Recovery of Lithium Using Tributyl Phosphate in Methyl Isobutyl Ketone and Fecl3

Extraction of lithium from salt lake brine containing boron using multistage centrifuge extractors

Extraction Equilibria of Lithium with Tributyl Phosphate in Three Diluents

Modelling of lithium extraction with TBP/P507–FeCl3 system from salt-lake brine

Extraction of rubidium and cesium from a leach solution of lepidolite with biomass carbon adsorbents