Abstract:Aluminum matrix composites have been widely used in aerospace and automotive fields due to their excellent physical properties. Cryogenic treatment was successfully adopted to improve the performance of aluminum alloy components, while its effect and mechanism on the aluminum matrix composite remained unclear. In this work, the effects of cryogenic treatment on the microstructure evolution and mechanical properties of 15%SiCp/2009 aluminum matrix composites were systematically investigated by means of Thermoelectric Power (TEP), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The results showed that TEP measurement can be an effective method for evaluating the precipitation characteristics of 15%SiCp/2009 aluminum matrix composites during aging. The addition of cryogenic treatment after solution and before aging treatment promoted the precipitation from the beginning stage of aging. Furthermore, the aging time for the maximum precipitation of the θ′′ phase was about 4 h advanced, as the conduction of cryogenic treatment accelerates the aging kinetics. This was attributed to the great difference in the linear expansion coefficient between the aluminum alloy matrix and SiC-reinforced particles, which could induce high internal stress in their boundaries for precipitation. Moreover, the lattice contraction of the aluminum alloy matrix during cryogenic treatment led to the increase in dislocation density and micro defects near the boundaries, thus providing more nucleation sites for precipitation during the aging treatment. After undergoing artificial aging treatment for 20 h, the increase in dispersive, distributed precipitates after cryogenic treatment improved the hardness and yield strength by 4% and 16 MPa, respectively.

Effect of Heat-Treatment on Stress Relief and Dimensional Stability Behavior of SiCp/Al Composite with High SiC Content

Effect of Different Dimensional Stability Treatments on Microstructure and Mechanical Properties of SiC_p/2024Al Composite

Effect of Thermal-Cold Cycling Treatment on Dimensional Stability of SiCp/2024Al Composite

Effect of thermal-cooling cycle treatment on thermal expansion behavior of particulate reinforced aluminum matrix composites

Effect of heat treatment on dislocation states and work hardening behaviors of SiCw/6061Al composite

Effect of the Heat Treatment Process on the Properties of SiCp/AL Composites

The Influence of Cryogenic Treatment on the Microstructure and Mechanical Characteristics of Aluminum Silicon Carbide Matrix Composites

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Thermal expansion and dimensional stability of Al–Si matrix composite reinforced with high content SiC

Microstructure and mechanical properties of the α-SiAlON/α-SiC composites: Effects of heat treatment

Microstructural Evolution and Dimensional Stability of 45vol% SiC/Al Composites under Long-Term Aging

Effect of Heat Treatment on Tribological Properties of SiCp/Al–Mg–Mn–Cu Aluminum Matrix Composites

Study on Dimensional Stability of Csf/Al Composites

Effect of Heat Treatment on Microstructure and Corrosion Resistance of SiCp/Al 2124 Composite

EFFECTS OF HEAT TREATMENT ON THE THERMAL EXPANSION BEHAVIOR OF SiC WHISKER REINFORCED ALUMINUM COMPOSITE

Effect of low temperature treatment on tensile yield strength of SiV6061 Al alloy composites®

Study of the residual stress distribution in SiCp/Al composites under thermal cycling conditions

Revealing the mechanism of internal stress on dimensional stability in SiC/Al composites under long-term thermal exposure

Thermal Stress Analysis of SiCP/2024Al Composites under Different Heat Treatments

Effect of Low Temperature Treatment on Tensile Yield Strength of Sicw/6061 Al Alloy Composites

Effect of Heat Treatment on Microstructure and Mechanical Properties of Squeeze Cast n SiCp/AZ91D Magnesium Matrix Composites