Study on Constitutive Modeling and Processing Maps for Hot Deformation of Medium Carbon Cr–Ni–Mo Alloyed Steel

Chi Zhang,Liwen Zhang,Wenfei Shen,Cuiru Liu,Yingnan Xia,Ruiqin Li

DOI: https://doi.org/10.1016/j.matdes.2015.11.036

IF: 9.417

2016-01-01

Materials & Design

Abstract:The hot deformation behavior of medium carbon Cr–Ni–Mo alloyed steel 34CrNiMo was studied in the wide temperature range of 900–1150°C and the strain rate of 0.002–5s−1. The thermo-mechanical analysis using Thermo-Calc software indicates austenite is the main phase during hot compression, which has a high occurrence tendency of DRX because of low stacking fault energy of such a phase. Constitutive equations for flow stress were developed by using the work hardening curve for the work hardening and dynamic recovery period and Avrami equation for the dynamic recrystallization period. All the factors in the equations can be illustrated in terms of Zener–Hollomon parameter. Besides, processing maps based on dynamic material model at the strains of 0.2, 0.4, 0.6, 0.8 and 1.0 were established. The concluded optimum hot working parameters are at 950–1100°C & 0.01–0.2s−1 and 1100–1150°C & 0.01–5s−1.