Abstract:Ni-based superalloys are widely used in aerospace applications. However, traditional constitutive equations often lack the necessary accuracy to predict their high-temperature behavior. A novel constitutive model, utilizing Taylor series expansions and partial derivatives, is proposed to predict the high-temperature flow behavior of a nickel-based superalloy. Hot compression tests were conducted at various strain rates (0.01 s-1, 0.1 s-1, 1 s-1, and 10 s-1) and temperatures (850 °C to 1200 °C) to gather comprehensive experimental data. The performance of the new model was evaluated against classical models, specifically the Arrhenius and Hensel-Spittel (HS) models, using metrics such as the correlation coefficient (R), root mean square error (RMSE), sum of squared errors (SSE), and sum of absolute errors (SAE). The key findings reveal that the new model achieves superior prediction accuracy with an R value of 0.9948 and significantly lower RMSE (22.5), SSE (16,356), and SAE (5561 MPa) compared to the Arrhenius and HS models. Additionally, the stability of the first-order partial derivative of logarithmic stress with respect to temperature (∂lnσ/∂T) indicates that the logarithmic stress-temperature relationship can be approximated by a linear function with minimal curvature, which is effectively described by a second-degree polynomial. Furthermore, the relationship between logarithmic stress and logarithmic strain rate (∂lnσ/∂lnε˙) is more precisely captured using a third-degree polynomial. The accuracy of the new model provides an analytical basis for finite element simulation software. This helps better control and optimize processes, thus improving manufacturing efficiency and product quality. This study enables the optimization of high-temperature forming processes for current superalloy products, especially in aerospace engineering and materials science. It also provides a reference for future research on constitutive models and high-temperature material behavior in various industrial applications.

Constitutive Models for High-Temperature Flow Behaviors of A Ni-Based Superalloy

Deformation Behavior and Constitutive Model for High Temperature Compression of a Newly Type of Ni3Al‐based Superalloy

High-temperature deformation characteristics and constitutive models of Inconel 625 superalloy

A New Constitutive Model Based on Taylor Series and Partial Derivatives for Predicting High-Temperature Flow Behavior of a Nickel-Based Superalloy

Arrhenius-Type Constitutive Model for High Temperature Flow Stress in a Nickel-Based Corrosion-Resistant Alloy

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Hot deformation behavior and flow stress modeling of a novel CoNi-based wrought superalloy

Constitutive Analysis on High-Temperature Flow Behavior of 3Cr-1Si-1ni Ultra-High Strength Steel for Modeling of Flow Stress

Hot Deformation Behavior and Constitutive Modeling of Alloy 800h Considering Effects of Strain

Study on High Temperature Mechanical Behavior and Microstructure Evolution of Ni3Al-based Superalloy JG4246A

An innovative constitutive material model for predicting high temperature flow behaviour of inconel 625 alloy

Torque-velocity relation and muscle fibre characteristics of foot dorsiflexors after long-term overuse of residual muscle fibres due to prior polio or L5 root lesion.

Optimization of the hot working parameters of a nickel-based superalloy using a constitutive-dynamic recrystallization model and three-dimensional processing map

Nutrient Mass Flux between Florida Bay and the Florida Keys National Marine Sanctuary

Application of Constitutive Models and Machine Learning Models to Predict the Elevated Temperature Flow Behavior of TiAl Alloy

Constitutive model for hot deformation of aluminum alloy

Constitutive Modeling of the Hot Deformation Behavior in 6082 Aluminum Alloy

Dynamic Mechanical Properties and Modified Material Constitutive Model for Hot Forged Ti2AlNb over Wide Ranges of Temperature and Strain Rate

Flow stress prediction of Hastelloy C-276 alloy using modified Zerilli−Armstrong, Johnson−Cook and Arrhenius-type constitutive models

High temperature flow behavior and constitutive model of alloy transition layer in composite steel tube prepared by centrifugal self‐propagating high‐temperature synthesis (SHS)

Strain Compensation of the Constitutive Equation for High Temperature Flow Stress of a Al-Cu-Li Alloy