Abstract:This article presents a dual-polarized planar ultrawideband modular antenna (PUMA) array, aimed at scaling its operating frequency directly to the ultrahigh-frequency (UHF) range. In contrast to the traditional PUMA designs that use closely spaced probes feeding, the proposed design employs tapered probes with larger separation for feeding the array. This architecture enables the antenna to retain the desirable characteristics of unbalanced feeding, ease of manufacturing, and straightforward assembly while avoiding the introduction of additional shorting pins or "cable organizers" and complex external matching networks typically required to eliminate common-mode resonances and achieve wideband performance. Additionally, the use of tapered probes not only eliminates the requirement for any substrate material between the antenna and the ground plane but also inherently contributes to enhancing the polarization isolation. The wide-angle impedance matching layer is implemented using advanced 3-D printing technology, which minimizes the need for multiple substrate layers and adhesive processes and contributes to cost reduction. As an evaluation, an array is meticulously designed to operate across a wide bandwidth of 6.1:1 (0.52–3.19 GHz) with an active VSWR < 3 while scanning within a range of ±45° in all planes. The polarization isolation surpasses 15 dB throughout the majority of the bandwidth when undergoing ±45° scans in the E- and H-planes. An prototype array consisting of 128 ports, with 64 elements per polarization, is manufactured and assessed. The experimental findings validate the design as the measured data closely align with the simulated results. The proposed antenna offers significant advantages, such as ultrawideband (UWB), wide scanning range, low cost, and modularity, which make it holds great potential for meeting the evolving demands of modern communication systems.

4-Element Planar Array Antenna for UWB Application

Four-element Planar Array Antenna for UWB Application

A novel ultrawideband planar antenna with dual band-notched performance

Novel Planar Monopole UWB Antenna with 5-Ghz Band-Notched Characteristic

A BEVELED AND SLOT-LOADED PLANAR BOW-TIE ANTENNA FOR UWB APPLICATION

Equilateral Triangular Dielectric Resonator and Metal Patch Hybrid Antenna for UWB Application

A Compact Ultra-Wideband Planar Printed Bow-Tie Quasi-Yagi Antenna with Rhombus Director and Tapered CPS Connection Structure

Directly Connected Linear Antenna Array with Band Notch Characteristics for UWB Applications

Ultrawideband, Wide Scanning Stripline-Fed Tightly Coupled Array Antenna Based on Parallel-Dipole Elements

A 4x4 Planar UWB-MIMO Antenna with Dual Linear Polarization for WLAN/5G/WiFi/X-band

An Ultra Wideband Antenna Array Notched with U-shaped Slot

A Low-Profile, Directional, Ultrawideband Antenna

Novel Planar Ultra-Wideband Modular Antenna Array with Low Profile

Full-Metal Dual-Polarized Phased Array Antenna With Large Element Spacing

An Ultrawideband Unidirectional Bowtie Antenna with Enhanced Radiation

A 4-Element UWB MIMO Antenna System with High Isolation Performance

A Four-Leaf Clover Shape MIMO Antenna for UWB Applications

A PLANAR MONOPOLE UWB ANTENNA WITH IMPROVED LOWER END BANDWIDTH USING AN L-SHAPED STUB EXTENDED ON THE GROUND PLANE

A Broadband Bow-Tie Antenna Used in UHF with Metal Reflection Plane

A Planar UHF-Band Ultrawideband Modular Antenna Array With Tapered Probes Feed

Ultra-wideband Printed Antennas for Communication Applications