Abstract:Knowledge of transformation crystallography and variant organization of product phase was a prerequisite for tuning microstructure and enhancing functionalities in materials with displacive structure-transformation. However, the transformation orientation relationship (OR) between parent austenite and non-modulated (NM) martensite in traditional NiMnGa ferromagnetic shape memory alloy was not yet well-determined via direct experimental results, thus leading to ambiguity in understanding the self-accommodated configuration. In this work, by generating a microstructure with coexisting austenite and NM martensite through minor Co substitution and proper heat treatment, the transformation OR was unambiguously determined to be the N-W relation with {111}A//{101}NM and <2¯11>A//<101¯>NM on the basis of accurate EBSD orientation measurements. Analysis on deformation gradient matrix constructed from the N-W OR revealed that, the internal nano-twined structure allowed a maximum profit for eliminating the overall latticed deformation caused by transformation, overweighing the “sandwich” micro-variant pair structure. Such strain accommodation mechanisms consequently contributed to the resultant self-accommodated hierarchically twinned structure of martensite. Moreover, it was found that the prior austenite grain boundaries (PAGBs) provided dominated nucleation sites for NM martensite variants, where the preferential variant selection at PAGBs mainly depended on the inclination angle between the PAGB and matching close-packed direction (<2¯11>A//<101¯>NM) of variants. The present study provided comprehensive information on transformation crystallography and displacive characters of austenite to NM martensite transformation, which was useful for the efforts in property optimization and theoretical simulation.

Indirect evidence for the existence of the Mn partitioning spike during the austenite to ferrite transformation

Analysis of Ferrite Growth Retardation Induced by Local Mn Enrichment in Austenite Created by Prior Interface Passages

Partition and Non-Partition Transition of Austenite Growth from a Ferrite and Cementite Mixture in Hypo- and Hypereutectoid Fe-C-Mn Alloys

Kinetic Transitions and Mn Partitioning During Austenite Growth from a Mixture of Partitioned Cementite and Ferrite: Role of Heating Rate

Application of cyclic partial phase transformations for identifying kinetic transitions during solid-state phase transformations: Experiments and modeling

Influence of Austenite Deformation on Ferrite Growth in a Fe–C–Mn Alloy

Study of Partition to Non-Partition Transition of Austenite Growth along Pearlite Lamellae in Near-Eutectoid Fe-C-Mn Alloy

Application of the stagnant stage concept for monitoring Mn partitioning at the austenite-ferrite interface in the intercritical region for Fe-Mn-C alloys

Experimental Evidence of the Effect of Alloying Additions on the Stagnant Stage Length During Cyclic Partial Phase Transformations

Thermodynamic in γ→ε phase transformation and γ→α′ phase transformation in Fe-Mn alloy during near-rapid solidification

Phase-field simulation of austenite reversion in a Fe-9.6Ni-7.1Mn (at.%) martensitic steel governed by a coupled diffusional/displacive mechanism

Evidence for Austenite to Non-Modulated Martensite Transformation Crystallography and Variant Organization in Ni-Mn-Ga-Co Ferromagnetic Shape Memory Alloys

In Situ Observation of Austenite–ferrite Interface Migration in a Lean Mn Steel During Cyclic Partial Phase Transformations

An Extraordinary Reversed Austenite Transformation Behavior in a Cu-Rich Medium Manganese Steel

Transition Between Alloy–element Partitioned and Non-Partitioned Growth of Austenite from a Ferrite and Cementite Mixture in a High-Carbon Low-Alloy Steel

Analysis of phase transformation thermodynamics and kinetics and its relationship to structure-mechanical properties in a medium-Mn high strength steel

Phase-field simulation of austenite reversion in a Fe-9.6Ni-7.1Mn (at%) martensitic steel governed by a coupled diffusional/displacive mechanism

Analysis of the stagnant stage in diffusional phase transformations starting from austenite–ferrite mixtures

Analysis of Transformation Stasis During the Isothermal Bainitic Ferrite Formation in Fe–C–Mn and Fe–C–Mn–Si Alloys

The In Situ Observation of Phase Transformations During Intercritical Annealing of a Medium Manganese Advanced High Strength Steel by High Energy X-Ray Diffraction

Phase Field Modeling of Cyclic Austenite-Ferrite Transformations in Fe-C-Mn Alloys