Abstract:Tetrabromobisphenol A (TBBPA) is widely used as a flame retardant and relatively persistent in the environment. There has been increasing interest in the developing alternative approach for its degradation and debromination. In this study, we explored the debromination of TBBPA by alkaline hydrothermal treatment with reactive minerals, namely iron powder, layered double hydroxide (LDH) and gibbsite. The effects of hydrothermal temperatures and time, the initial TBBPA concentrations, and additive amounts of reactive minerals on debromination were investigated. As a comparison, the conventional hydrothermal treatment with no additive as the control group was included. The UV-vis absorption spectra of TBBPA before and after debromination were studied as well. The results showed that increasing temperature was helpful for the improvement of debromination. It significantly increased by 223.5, 54.3 and 78.1% with increasing temperature from 140 to 160 °C for the control, iron power and LDH groups, respectively. When the hydrothermal time was shorter than a critical value, the debromination rate increased with time rising. A maximum rate of 79.9% was achieved for iron powder group after reaction for 8 h. The preferred initial TBBPA concentration was determined as 60 ppm for all groups. The optimum amounts of reactive minerals were not consistent and determined as 0.08 g for iron powder, 0.32 g for LDH and 0.16 g for gibbsite, respectively. The maximum absorption bands of TBBPA increased as the pH was raised. They were located at 209 and 308 nm for neutral TBBPA and increased to 211 and 311 nm for TBBPA-Na2CO3. New absorption bands in the wavelength region of 225-275 and 300-350 nm were observed, when TBBPA was subjected to hydrothermal treatment. Keywords: Brominated flame retardants (BFRs); tetrabromobisphenol A (TBBPA); debromination; hydrothermal treatment; UV-vis absorption spectra

Catalytic Debromination of Tetrabromobisphenol A by Ni/nZVI Bimetallic Particles

Debromination of Tetrabromobisphenol A by Nanoscale Zerovalent Iron: Kinetics, Influencing Factors, and Pathways

Kinetics and Mechanisms of Debromination of Tetrabromobisphenol A by Cu Coated Nano Zerovalent Iron

Degradation of Tetrabromobisphenol A by Sulfidated Nanoscale Zerovalent Iron in a Dynamic Two-Step Anoxic/Oxic Process.

New Insights into the Role of Ni Loading on the Surface Structure and the Reactivity of Nzvi Toward Tetrabromo- and Tetrachlorobisphenol A

Elimination of Bisphenol A with Visible Light-Enhanced Peroxydisulfate Activation Process Mediated by Fe3+-nitrilotriacetic Acid Complex.

Research on Removal of Tetrabromobisphenol A from Synthetic Wastewater by Nanoscale Zero Valent Iron Supported on Organobentonite

One-step Process for Debromination and Mineralization of Tetrabromobisphenol a by a Layered Double Oxide-Supported Sulfurized Nanoscale Zero-Valent Iron under Ambient Conditions

Reductive Degradation of Tetrabromobisphenol Using Iron-Silver and Iron-Nickel Bimetallic Nanoparticles with Microwave Energy.

Efficient Degradation of Tetrabromobisphenol A Via Electrochemical Sequential Reduction-Oxidation: Degradation Efficiency, Intermediates, and Pathway.

Efficient Degradation of Tetrabromobisphenol A by Synergistic Integration of Fe/Ni Bimetallic Catalysis and Microbial Acclimation

Rapid debromination of tetrabromobisphenol A by Cu/Fe bimetallic nanoparticles in water, its mechanisms, and genotoxicity after treatments

Efficient Debromination of Tetrabromobisphenol A (TBBPA) by Au/Fe@biocarbon Derived from Bioreduction Precious Metals

A Novel Debromination of Tetrabromobisphenol A (TBBPA) by Hydrothermal Treatment with Reactive Minerals

Enhanced Reductive Degradation of Tetrabromobisphenol A by Biochar Supported Sulfidated Nanoscale Zero-Valent Iron: Selectivity and Core Reactivity

Nano Pd doped Ni foam electrode stimulated electrochemical reduction of tetrabromobisphenol A: Optimization strategies and function mechanism

Optimization and Mechanism of Tetrabromobisphenol A Removal by Dithionite under Anaerobic Conditions: Response Surface Methodology and Degradation Pathway

Efficient catalytic degradation of bisphenol A coordinated with peroxymonosulfate via anchoring monodispersed zero-valent iron on natural kaolinite

Catalytic generation of adsorbed atomic H for degradation of 2,2',4,4'-tetrabromodiphenyl ether by mechanochemically prepared Ni-doped oxalated zero-valent iron

Degradation of TBBPA and BPA from Aqueous Solution Using Organo-Montmorillonite Supported Nanoscale Zero-Valent Iron

[Reductive Debromination of Polybrominated Diphenyl Ethers in Aquifier by Nano Zero-Valent Iron: Debromination Kinetics and Pathway].