Abstract:Graphene oxide (GO) and reduced graphene oxide (RGO) have been applied in the anaerobic ammonium oxidation (anammox) process for nitrogen removal as electron shuttles. However, there is still controversy about their efficacy. In this study, nine graphene-based materials with a gradient of three particle sizes (large (l), medium (m) and small (s) sizes) and oxidation degrees, were used to compare their effects on the anammox process efficiency. The graphene-based materials include GO and its reduced products (RGO250 and RGO800) obtained at temperatures of 250 degrees C and 800 degrees C respectively. It was observed that their enhancements on the anammox process were in the order of GO > RGO800 > RGO250. In detail, at the dose of 100 mg/L, specific anammox activities (SAA) were promoted by 6.7% (l-GO), 4.9% (l-RGO800), 11.5% (m-GO), 7.3% (m-RGO800), 13.2% (s-GO) and 8.3% (s-RGO800) compared to the control respectively; while RGO250 with the same dose inhibited the process. In addition, the enhancement of the anammox process was increasing with the decreasing size of GO and RGO800. The nitrite reductase (NIR) activity was greatly increased by up to 24.9% with the presence of GO, which might be attributed to organized and specific electron transport with oxygen functional groups. The finding of hydroxyl on RGO and increasing content of oxygen determined after reaction detected by Fourier transform infrared spectroscopy and energy dispersive spectrometer respectively, indicated the essential condition for RGO's function on transferring electrons for key enzymes in annamox bacteria. Most importantly, O/C (Oxygen/Carbon) ratios of graphene-based materials had greater effects on the promotion of the anammox process than the particle size and electrical conductivity.

Fast start-up of the anammox process with addition of reduced graphene oxides

Effects of reduced graphene oxide on the activities of anammox biomass and key enzymes

Fast Start-Up of Anammox Process with Appropriate Ferrous Iron Concentration.

Application of cathode modified by reduced graphene oxide/polypyrrole to enhance anammox activity

Rapid anammox startup in response to nitrogen loading variations: Reactor performance, microbial dynamics and mechanism exploration

Fast start-up of the cold-anammox process with different inoculums at low temperature (13 °C) in innovative reactor.

[Performance of ANAMMOX Attached Microbial Film Expanded Bed Reactor].

A twilight for the complete nitrogen removal via synergistic partial-denitrification, anammox, and DNRA process

Promotion of anammox process by different graphene-based materials: Roles of particle size and oxidation degree

Fast start-up of anammox process: Effects of extracellular polymeric substances addition on performance, granule properties, and bacterial community structure

Effects of Fe3+ on Microbial Communities Shifts, Functional Genes Expression and Nitrogen Transformation During the Start-Up of Anammox Process

The effects of graphene on low-temperature anammox process: The insights from short-term tests and long-term operation

Studies on Start-Up Technique of Anammox Bioreactor

The Performance of Anammox Reactor During Start-Up: Enzymes Tell the Story

Enhancement of Nitrogen Removal in a Novel Anammox Reactor Packed with Fe Electrode.

Rapid start up anammox process through a new strategy with inoculating perchlorate reduction sludge and a small amount of anammox sludge

Start-up of Anammox Bioreactor with Denitrification Biofilm

Using Graphene Oxide to Enhance the Activity of Anammox Bacteria for Nitrogen Removal

[Effect of Sequential Biocatalyst Addition on Anammox Process].

Rapid start-up and application of Anammox in a pilot-scale non-woven rotating biological contactor

Rapid start-up of anammox reactor using granular sludge supported on activated carbon