Abstract:The transformation of N/S/Cl during pyrolysis of waste tire were investigated by Thermogravimetry-Mass Spectrum (TG-MS) and flow tube furnace reactor. The pyrolysis of waste tire included four stages, i.e., dehydration below 200 ℃, decomposition of tire additives at 200∼300 ℃, degradation of natural rubber at 300∼420 ℃, and cracking of synthetic rubber at 420∼500 ℃. The activation energy Eα were calculated according to the Coats-Redfern integral method, ca. 154.72∼158.23 and 200.46∼231.58 kJ/mol for degradation of natural rubber and synthetic rubber, respectively. Most of nitrogen (60.32∼67.78 wt.%), sulfur (56.73∼62.38 wt.%), and chlorine (58.60∼64.92 wt.%) were remained in the pyrolytic char. For the pyrolytic oil composition, expect for alkanes, alkenes, aromatic hydrocarbons, and oxygenates, the S-containing disulfide and sulfurous acid ester, N-containing quinoline and pyrimidine diamine, and Cl-containing silane, dichlorododecylmethyl- were detected. The nitrogen, sulfur, and chlorine in pyrolytic gas had diverse types. The N-containing pollutants mainly derived from inorganic ammonium and heterocyclic-N. NH3 had a wide releasing temperature range, while NO, HCN, and HNCO were mainly generated at 300∼600 °C. The C-S and -SH radicals mainly contributed to S-containing pollutants, i.e., H2S, COS, CS2, SO2, CH3SH, and C6H5SH. The Cl-containing pollutants exhibited dominant release within the temperature range of 300∼600 °C. Overall, higher heating rate promoted gas emissions, especially for NO, HCN, CH3SH, and HCl. This article provides basic knowledge on hazardous N/S/Cl transformation in solid char, liquid oil, and gas during pyrolysis of waste tire that will provide valuable information for future control technologies of pollutants emission.

The Mechanism of Sulfur Component in Pyrolyzed Char from Waste Tire on the Elemental Mercury Removal

Mercury Removal Mechanism of Mechanochemical Sulfur Modified Straw Coke: Density Functional Theory Calculation and Kinetic Fitting

Mercury Removal from Coal Combustion Flue Gas by Mechanochemically Sulfur Modified Straw Coke and Its Mercury Stability

Influence of Flue Gas Components on the Mercury Adsorption/oxidation by Mechanochemical S2Cl2-modified Sawdust Coke

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Role of Inherent Active Constituents on Mercury Adsorption Capacity of Chars from Four Solid Wastes

Elemental Mercury Removal Using Biochar Pyrolyzed from Municipal Solid Waste

An Experimental Study on Coal-Char Sorbents for Gas-Phase Mercury Removal from Flue Gas

Impact of HCl and O2 on Removal of Elemental Mercury by Heat-Treated Activated Carbon: Integrated X-ray Analysis

Waste tire heat treatment to prepare sulfur self-doped char via pyrolysis and K2FeO4-assisted activation methods

Removal of Element Mercury by Medicine Residue Derived Biochars in Presence of Various Gas Compositions

Ionic mercury captured by H2S sulfurized biochar in liquid hydrocarbons: Mechanism and stability evaluation

Removal of impurities from waste tire pyrolysis char using the molten salt thermal treatment

Adsorption of Elemental Mercury in Flue Gas Using Biomass Porous Carbons Modified by Microwave/hydrogen Peroxide

Desulfurization and upgrade of pyrolytic oil and gas during waste tires pyrolysis: The role of metal oxides

Effect of H2S/HCl on the Removal of Elemental Mercury in Syngas over CeO2–TiO2

Waste Tire Heat Treatment to Prepare Sulfur Self-Doped Char: Operando Insight into Activation Mechanisms Based on the Char Structures Evolution

Efficient Removal of Elemental Mercury from Coal-Fired Flue Gas over Sulfur-Containing Sorbent at Low Temperatures

Transformation of nitrogen, sulfur and chlorine during waste tire pyrolysis

Unrefined low-grade pyrolusite for elemental mercury removal from flue gas: Experimental and DFT insights

Pyrolysis solid product as a sorbent for flue gases mercury capture — Part I: Sorbent formation and characteristics