Abstract:Rising sea levels caused by climate change are increasing the risk of overtopping on coastal structures. Moreover, there is a growing societal concern about the visual impact of these structures, which leads to the lowering of their crest freeboards. In previous studies, safety during overtopping events was assessed considering the overtopping layer thickness ( hc ), the overtopping flow velocity ( uc ) and the individual wave overtopping volume ( V ). Existing models in the literature to estimate hc , uc and V on mound breakwater crests are mainly deterministic, involve a chain of successive estimations leading to accumulated errors and/or do not account for the dependencies between hc , uc and V . This study proposes a model to describe the joint probability distribution of hc , uc and V based on bivariate copulas. Experimental data from small-scale 2D physical tests conducted on mound breakwaters with three armor layers (single-layer Cubipod®, and double-layer cubes and rocks) in depth-limited breaking wave conditions on two mild bottom slopes and dimensionless crest freeboards between 0.33 and 3.20 is used. Lognormal distribution functions are proposed for each variable and a multivariate dependence model is developed through a one-tree vine-copula. The parameters of this model are quantified directly using wave characteristics and the structure geometry minimizing the accumulated errors in the final predictions. The application of the model is illustrated by computing the probability of not fulfilling at least a tolerability limit for one of the studied variables (OR probability). The OR probability is computed both considering the dependence and assuming independence between the variables and a significant difference is obtained. It is concluded that by accounting for the multivariate dependence between the variables, it is possible to reduce the crest freeboard and, thus, achieve a more economic design within the required safety level.

A Note on Probability Design of Wave Model Tests

A 3-D Numerical Study of the Random Wave-Induced Response in a Spatially Heterogenous Seabed

Probabilistic analysis of wave-induced dynamic response in a poroelastic sloping seabed using random finite element method

Numerical Investigation on the Hydrodynamic Characteristics of Coastal Freak Wave Using a CIP-based Model

Managing Information Uncertainty in Wave Height Modeling for the Offshore Structural Analysis Through Random Set

Preliminary Investigations on Uncertainty Analysis of Wind-Wave Predictions in Lake Michigan

Probabilistic Analysis of Wave-Induced Seabed Response Based on Stochastic Finite Element Method

Experimental Investigation of Wave Propagation and Overtopping over Seawalls on a Reef Flat

Statistical Distribution of Nonlinear Random Water Wave Surface Elevation

Uncertainty in wave hindcasts in the North Atlantic Ocean

Sea state conditions for marine structures' analysis and model tests

Numerical Analysis on Random Wave-Induced Porous Seabed Response

A stochastic numerical model for wave-induced dynamic response in a spatially heterogeneous seabed around structures

Efficient uncertainty quantification of a fully nonlinear and dispersive water wave model with random inputs

Numerical study for random wave-induced porous seabed response

Reliability Analysis of Ultimate Strength of Inland Waterway Bulk Carriers

A mixed stochastic waves model for analyzing offshore structures considering engineering characteristics correlation of wind-generated-wave and swell

Design loads and reliability assessment of marine structures considering statistical models of metocean data

Numerical Simulation of Multi-Directional Random Wave Transformation in a Yacht Port

Proposal on Hybrid Design Method of Outer Port Facilities Using Failure Probability

A copula-based model to describe the uncertainty of overtopping variables on mound breakwaters