Abstract:Methods to quantify ventricle material properties noninvasively using in vivo data are of great important in clinical applications. An ultrasound echo-based computational modeling approach was proposed to quantify left ventricle (LV) material properties, curvature, and stress/strain conditions and find differences between normal LV and LV with infarct. Echo image data were acquired from five patients with myocardial infarction (I-Group) and five healthy volunteers as control (H-Group). Finite element models were constructed to obtain ventricle stress and strain conditions. Material stiffening and softening were used to model ventricle active contraction and relaxation. Systolic and diastolic material parameter values were obtained by adjusting the models to match echo volume data. Young's modulus (YM) value was obtained for each material stress-strain curve for easy comparison. LV wall thickness, circumferential and longitudinal curvatures (C-and L-curvature), material parameter values, and stress/strain values were recorded for analysis. Using the mean value of H-Group as the base value, at end-diastole, I-Group mean YM value for the fiber direction stress-strain curve was 54% stiffer than that of H-Group (136.24 kPa versus 88.68 kPa). At end-systole, the mean YM values from the two groups were similar (175.84 kPa versus 200.2 kPa). More interestingly, H-Group end-systole mean YM was 126% higher that its end-diastole value, while I-Group end-systole mean YM was only 29% higher that its end-diastole value. This indicated that H-Group had much greater systole-diastole material stiffness variations. At beginning-of-ejection (BE), LV ejection fraction (LVEF) showed positive correlation with C-curvature, stress, and strain, and negative correlation with LV volume, respectively. At beginning-of-filling (BF), LVEF showed positive correlation with C-curvature and strain, but negative correlation with stress and LV volume, respectively. Using averaged values of two groups at BE, I-Group stress, strain, and wall thickness were 32%, 29%, and 18% lower (thinner), respectively, compared to those of H-Group. L-curvature from I-Group was 61% higher than that from H-Group. Difference in C-curvature between the two groups was not statistically significant. Our results indicated that our modeling approach has the potential to determine in vivo ventricle material properties, which in turn could lead to methods to infer presence of infarct from LV contractibility and material stiffness variations. Quantitative differences in LV volume, curvatures, stress, strain, and wall thickness between the two groups were provided.

Using 3D Echo-based Modeling to Quantify in Vivo Ventricle Material Properties: A Multi-patient Study

3D Echo-Based Patient-Specific Computational Left Ventricle Models to Quantify Material Properties and Stress/Strain Differences between Ventricles with and without Infarct.

Infarcted Left Ventricles Have Stiffer Material Properties and Lower Stiffness Variation: Three-Dimensional Echo-Based Modeling to Quantify in Vivo Ventricle Material Properties.

Heart Composite Material Model for Stress-Strain Analysis

[Three-Dimensional Motion Analysis of Right Ventricular Based on an Electrophysiologic-Mechanical Composite Heart Model].

The Construction of Three-dimensional Composite Finite Element Mechanical Model of Human Left Ventricle.

Effect of Cardiac Motion on Body Surface Electrocardiographic Potentials: an Mri-Based Simulation Study

Material Stiffness Parameters As Potential Predictors of Presence of Left Ventricle Myocardial Infarction: 3D Echo-Based Computational Modeling Study

Modeling Active Contraction and Relaxation of Left Ventricle Using Different Zero-Load Diastole and Systole Geometries for Better Material Parameter Estimation and Stress/Strain Calculations

Three-dimensional Motion Analysis of the Right Ventricle Using an Electromechanical Biventricular Model

Myocardiac 3D Elastography Using MRI Images

Patient-Specific Echo-Based Fluid-Structure Interaction Modeling Study of Blood Flow in the Left Ventricle with Infarction and Hypertension

Patient-Specific Echo-Based Left Ventricle Models for Active Contraction and Relaxation Using Different Zero-Load Diastole and Systole Geometries

How Much Geometrical Detail Do We Need In Cardiac Electrophysiological Imaging? A Generic Heart-Torso Representation For Fast Subject-Specific Customization

Patient-specific in Vivo Right Ventricle Material Parameter Estimation for Patients with Tetralogy of Fallot Using MRI-based Models with Different Zero-Load Diastole and Systole Morphologies.

A Statistical Physiological-Model-Constrained Framework for Computational Imaging of Subject-Specific Volumetric Cardiac Electrophysiology Using Optical Imaging and MRI Data

3D Image-Based Computational Modeling for Patient-Specific Mechanical Analysis of Human Heart Right Ventricles

Multi-Physics Mri-Based Two-Layer Fluid-Structure Interaction Anisotropic Models of Human Right and Left Ventricles with Different Patch Materials: Cardiac Function Assessment and Mechanical Stress Analysis

Multi-Modality Image-Based Modeling Approach for Cardiovascular Disease: Simulation, Assessment, Prediction, and Virtual Surgery

Preliminary study on evaluating volume changes in left atrial remodeling and left ventricular remodeling by three-dimensional echocardiography with automatic quantification

Ultrasonic Biomechanics Method for Vortex and Wall Motion of Left Ventricle: a Phantom and in Vivo Study.