Abstract:As a promising propulsion system, air-breathing rotating detonation engines (RDEs) are investigated with significant interest recently. However, simulations of air-breathing RDE with real flight condition are limited, and performance of RDEs with high inflow total temperature, as well as the influence of inflow total temperature on RDEs, needs further exploration. In this paper, simulations with four inflow total temperatures (300 K, 500 K, 700 K and 900 K) were conducted to analyze the propagation features of rotating detonation waves (RDWs) and operation modes in the RDE at low and high inflow total temperatures. Additionally, injection and mixing, as well as combustion characteristics and propulsion performance of the RDE were researched. It is found that with low inflow total temperature, single wave propagates in the combustor, which degenerates into shock wave at the outer wall due to insufficient mixing. When inflow total temperature is high, the RDE is in multi-wave operation mode and detonative combustion only occurs around the outer wall. With increase of inflow total temperature, mixability of reactants initially improves but then deteriorates slightly. Moreover, RDW propagation velocity and specific impulse of the RDE decrease. Though fuel utilization rate improves, detonation fraction drops dramatically and parasitic combustion fraction rises significantly, resulting from intensification of pre-combustion. Particularly, the detonation fraction is only 16.7 % and parasitic combustion fraction reaches up to 56.35 % at inflow total temperature of 900 K. Furthermore, regardless of the variation of inflow total temperature, detonative combustion is prominent in the premixed combustion mode, and the peak fraction of detonation appears at the off-stoichiometric ratio.

The Effect of the Inlet Total Pressure and the Number of Detonation Waves on Rotating Detonation Engines

Numerical Investigation of the Stability of Rotating Detonation Engines

Numerical Investigation of Effects of Fuel Injection on Rotating Detonation Engine

Effects of Injection Conditions on the Stability of Rotating Detonation Waves

Theoretical and Numerical Investigation on Total Pressure Gain in Rotating Detonation Engine

Numerical Investigation of Rotating Detonation Engine Propulsive Performance

Numerical Investigation of Spontaneous Formation of Multiple Detonation Wave Fronts in Rotating Detonation Engine

Multiple Ignitions and the Stability of Rotating Detonation Waves

Rotating Detonation Engine Injection Velocity Limit And Nozzle Effects On Its Propulsion Performance

Numerical Research on the Propagation Characteristics and Evolution Mechanisms of Rotating Detonation Waves with the Spatial Fluctuation of Inlet Total Pressure

Numerical Study of the Effects of Injection Conditions on Rotating Detonation Engine Propulsive Performance

Numerical Investigation of Flow Properties of Rotating Detonation Engines

Effects of the perturbation inlet on the evolution and oscillation characteristics of multiple rotating detonation waves

Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Three-dimensional Numerical Study on Rotating Detonation Engines Using Reactive Navier-Stokes Equations

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Numerical Study on the Instabilities in H2-air Rotating Detonation Engines

Effects of the inflow total temperature on the non-premixed rotating detonation engine performances

Operational Mode Transition in a Rotating Detonation Engine

Experimental Investigation on H 2 / O 2 Continuously Rotating Detonation Engine

The Effect of the Throat Width of Plug Nozzles on the Combustion Mode in Rotating Detonation Engines