Combustion Synthesis and Excellent Photocatalytic Degradation Properties of W18O49

Pengqi Chen,Mingli Qin,Dezhi Zhang,Zheng Chen,Baorui Jia,Qi Wan,Haoyang Wu,Xuanhui Qu

DOI: https://doi.org/10.1039/c5ce00995b

IF: 3.756

2015-01-01

CrystEngComm

Abstract:One-dimensional W18O49 nanoneedles were fabricated by solution combustion synthesis and exhibited an excellent visible light-driven photocatalytic performance.

What problem does this paper attempt to address?

Simple Approaches To Quality Large-Scale Tungsten Oxide Nanoneedles

Yz Jin,Yq Zhu,Rld Whitby,N Yao,Rz Ma,Pcp Watts,Hw Kroto,Drm Walton

DOI: https://doi.org/10.1021/jp048596q

2004-01-01

Abstract:In this paper, a systematic study of large-scale production of highly crystalline W18O49 nanoneedles with high aspect ratios using a simple tungsten metal reacting with water at 800-1000 degreesC has been described. By altering the W source and other experimental conditions, we have generated W18O49 crystals with diverse morphologies, and needles with desired dimensions are achieved. The quality nanoneedles provide ideal samples for further property investigations. Possible growth mechanisms are discussed.
Electrocatalysis: Reduced Mesoporous Co3O4 Nanowires as Efficient Water Oxidation Electrocatalysts and Supercapacitor Electrodes (Adv. Energy Mater. 16/2014)

yongcheng wang,tong zhou,kun jiang,peimei da,zheng peng,jing tang,biao kong,wenbin cai,zhongqin yang,gengfeng zheng

DOI: https://doi.org/10.1002/aenm.201470082

IF: 27.8

2014-01-01

Advanced Energy Materials

Abstract:In article number 1400696, Zhongqin Yang, Gengfeng Zheng, and co-workers report the use of chemically reduced, mesoporous Co3O4 nanowires for enhanced sunlight-driven water splitting and oxygen evolution reaction. Mesoporous Co3O4 nanowires are effectively reduced by NaBH4 and new oxygen vacancies are formed during this process. These oxygen vacancies lead to much higher electrical conductivity and electrocatalytic activity of Co3O4 nanowires.
P2&#x2013;17: the Study of W<inf>18</inf>O<inf>49</inf> Nanoneedle Emitters

Yong Hou,Shaozhi Deng,Ningsheng Xu,Liu Fei

DOI: https://doi.org/10.1109/ivnc.2010.5563151

2010-01-01

Abstract:We show that W 18 O 49 nanoneedles may be prepared by thermal vapor deposition without catalyst. Field emission measurement has been carried out and it is found that this new W 18 O 49 nanostructure has much better field emission property than W 18 O 49 nanowires.
Solution combustion synthesis of ternary Ni/WC/C composites with efficient electrocatalytic oxygen reduction performance

Pengqi Chen,Yunxiao Tai,Qingqing Fang,Dang Xu,Yufei Gao,Jigui Cheng

DOI: https://doi.org/10.1039/d1ra06884a

IF: 4.036

2021-01-01

RSC Advances

Abstract:A Ni/WC/C catalyst synthesized via a rapid combustion method showed considerable efficiency in the oxygen reduction reaction. The excellent performance is attributed to a synergistic effect arising from the ternary composite and solution combustion.

chemistry, multidisciplinary
Synthesis of Fe-doped WO3 Nanostructures with High Visible-Light-driven Photocatalytic Activities

Hui Song,Yaguang Li,Zirui Lou,Mu Xiao,Liang Hu,Zhizhen Ye,Liping Zhu

DOI: https://doi.org/10.1016/j.apcatb.2014.11.020

2014-01-01

Abstract:In this paper, the Fe-doped WO3 nanostructures with precisely controlled Fe doping contents are obtained by using a template method. The characterizations obviously show that the as-prepared samples have hollow spherical like morphology, small grain size (10 nm), high crystalline quality, and ultrahigh surface area (225 m(2)/g). Furthermore, the band gap of the Fe-doped WO3 nanostructures is facilely tunable by controlling the Fe contents. And the density-functional theory (OFT) calculation reveals that the formation of impurity band in the band gap narrows the band gap of the Fe-doped WO3 nanostructures. The photocatalytic activity of WO3 nanostructures could be remarkably enhanced by doping the Fe impurity. This can be attributed to the fact that the red shift of absorption edge and the trapping effect of the Fe-doped WO3 nanostructures. The research result provides a general and effective method to synthesize different photocatalysts with enhanced visible-light-driven photocatalytic performance. (C) 2014 Elsevier B.V. All rights reserved.
Ultrahigh-efficiency photocatalysts based on mesoporous Pt-WO3 nanohybrids.

Zhenhai Wen,Wei Wu,Zhuang Liu,Hao Zhang,Jinghong Li,Junhong Chen

DOI: https://doi.org/10.1039/c3cp50647a

IF: 3.3

2013-01-01

Physical Chemistry Chemical Physics

Abstract:A reliable nanocasting method has been developed to synthesize mesoporous hybrids of platinum (Pt) nanoparticles decorating tungsten trioxide (WO3). The process began with modification of the SBA-15 template with carbon polymers and Pt nanoparticles accompanied by adsorption of W6+, which was then converted into m-Pt-WO3 composites by heat treatment and subsequent template removal. The synthetic strategy can be easily extended to prepare other mesoporous nanohybrids with metal oxide loaded precious metal composites. Comprehensive characterizations suggest that the as-developed m-Pt-WO3 nanohybrid exhibits unique properties with mesoporous structure, excellent crystalline structure, and high surface area. When the photocatalytic properties of m-Pt-WO3 nanohybrids were systematically investigated, it was revealed that the m-Pt-WO3 nanohybrids showed great promise for degrading the organic dye under visible light irradiation, which shows an excellent photocatalytic activity that far exceeded those of pure phase mesoporous WO3 and commercial TiO2 (P25), and was 10-fold more active than that of the bulk Pt-WO3 catalyst. The as-developed synthetic route opens up a new avenue for designing mesoporous hybrid materials for various applications benefiting from the unique porous structure, high surface area, and synergistic effects among constituents.
A Dissolution‐Regeneration Route to Synthesize Blue Tungsten Oxide Flowers and their Applications in Photocatalysis and Gas Sensing

xiangning song,chuya wang,weikang wang,xing zhang,nannan hou,hanqing yu

DOI: https://doi.org/10.1002/admi.201500417

IF: 5.4

2016-01-01

Advanced Materials Interfaces

Abstract:Tungsten oxide (WO3) has unique physicochemical properties. Although various synthetic methods have been proposed to fabricate tungsten oxide with different morphologies, methods of tailoring the tungsten oxide nanostructure toward new morphologies are still needed. In this work, a self-assembled WO3 center dot 0.33H(2)O nanoflower is synthesized using a dissolution and regeneration method. In such a two-step synthetic process, temperature, solvent, and reaction times are found to be the main parameters affecting the morphology of WO3 center dot 0.33H(2)O. The synthesized WO3 center dot 0.33H(2)O nanoflower exhibits a localized surface plasmon resonance effect and a high photocatalytic activity, which can be explained by the doping of W5+ and its morphology. Furthermore, this WO3 center dot 0.33H(2)O nanoflower can also be used as a gas sensor and has good selectivity and linearity towards acetone vapor in the range of 50-500 ppm.
Electronic state tuning over Mo-doped W18O49 ultrathin nanowires with enhanced molecular oxygen activation for desulfurization

Jun Xiong,Jiayu Li,Haoxue Huang,Ming Zhang,Wenshuai Zhu,Jiadong Zhou,Huaming Li,Jun Di

DOI: https://doi.org/10.1016/j.seppur.2022.121167

IF: 8.6

2022-04-01

Separation and Purification Technology

Abstract:Developing catalyst with abundant surface active sites is the core issue to achieve efficient catalytic oxidative desulfurization performance. In this work, Mo doped W18O49 ultrathin nanowires is fabricated through solvothermal method to provide plentiful low coordinated metal atoms around oxygen vacancies to trigger oxidative desulfurization reaction. As a non-stoichiometric oxide, the discorded lattice microstructure in W18O49 endows the formation of O vacancies neighboring low-valence W atoms, while the ultrathin structure ensure the fully exposure of surface atoms. Moreover, the doped Mo atoms will tune the surface atomic structure and electronic state of W18O49 nanowires, leading to the higher oxygen vacancy concentration and strengthened interaction with target sulfide molecules. Benefiting from these features, the higher molecular oxygen activation capacity can be realized over Mo-W18O49 nanowires to yield more superoxide radicals, making it with greatly improved oxidative desulfurization performance. The optimized 2%Mo-W18O49 catalyst shows nearly 100% removal of dibenzothiophene within 5 h and maintain the good cycle stability. This work supply new insights for the design of catalytic sites towards selective catalytic oxidative desulfurization.

engineering, chemical
Metallic WO2-decorated g-C3N4 nanosheets as noble-metal-free photocatalysts for efficient photocatalysis

Ning Li,Ning Li,Xueyun Gao,Junhui Su,Yangqin Gao,Lei Ge,Lei Ge

DOI: https://doi.org/10.1016/s1872-2067(22)64210-4

IF: 16.5

2023-04-01

Chinese Journal of Catalysis

Abstract:The introduction of a metallic cocatalyst is a good strategy for achieving a high carrier density and absorbing photons under wide-spectrum illumination. Herein, metallic WO2/g-C3N4 nanocomposites were designed and synthesized for the first time using a simple calcination method to enhance the photocatalytic performance. WO2/g-C3N4 exhibited significant photocatalytic properties: under visible light irradiation, 4 wt% WO2/g-C3N4 exhibited an RhB photocatalytic degradation of 96% in 120 min. Meanwhile, the H2 production rate of 4 wt% WO2/g-C3N4/3 wt% Pt was 2436.9 μmol g−1 h−1, which was 2.55 and 6.18 times higher than that of 3 wt% Pt/g-C3N4 (956.35 μmol g−1 h−1) and WO2/g-C3N4, respectively. Experimental tests and density functional theory calculations reveal that WO2 exhibits a metal-like performance with a narrow bandgap to capture electrons and hinders the recombination of photogenerated charge carriers at the interface of WO2/g-C3N4. Our study provides a new perspective for the rational design of metallic cocatalysts/semiconductors with highly efficient photocatalytic properties.

chemistry, physical,engineering, chemical, applied
Dual defects and build-in electric field mediated direct Z-scheme W18O49/g-C3N4-x heterojunction for photocatalytic NO removal and organic pollutant degradation

Min Wang,Guoqiang Tan,Mingyue Dang,Yong Wang,Bixin Zhang,Huijun Ren,Long Lv,Ao Xia

DOI: https://doi.org/10.1016/j.jcis.2020.08.040

2021-01-15

Abstract:In this work, dual defects mediated W18O49/g-C3N4-x heterojunction was prepared by in-situ hydrothermal method. The conversion from Ⅱ-type to Z-scheme heterojunction was achieved due to the formation of build-in electric field from g-C3N4-x to W18O49. Tests results indicated that the LSPR hot electrons of W18O49 could directly drive oxygen reduction reaction to generate O2- species and the partial electrons of g-C3N4-x were captured by O defect states of W18O49 to stabilize its free charge density, resulting in the continuous generation of high-energy hot electrons. The photo-generated carriers had the stronger redox ability compared with g-C3N4-x and W18O49 due to the Z-scheme charge transfer paths. Combined with the promoted exciton dissociation induced by N vacancies, the enhanced light absorption and accelerated carriers' separation induced by near-field enhancement effect in visible-NIR range of oxygen vacancies, W18O49/g-C3N4-x heterojunction exhibited enhanced photocatalytic performance for NO removal and full-solar-spectrum-driven pollutants degradation.
Photocatalytic Degradation of Volatile Organic Compounds over WO 2 /SnS 2 Nanofibers

Jianhua Zhang,Yingmei Fang,Yuwei Zhang,Yuan Lin,Yunyun Gui,Lijun Liu

DOI: https://doi.org/10.1021/acsanm.3c04496

IF: 6.14

2023-11-15

ACS Applied Nano Materials

Abstract:Solar-powered volatile organic compound oxidation attracts interest, but its efficiency suffers from poor utilization of photogenerated electrons. Oxygen can capture the electrons and convert them into superoxide radicals upon being activated. As a unique oxygen-deficiency oxide, WO2 chemisorbs and activates oxygen and functions as a potential cocatalyst for improving the utilization of charge carriers. Here, we report a WO2/SnS2 composite photocatalyst with SnS2 nanosheets vertically growing out of WO2 nanofibers. In situ X-ray photoelectron spectroscopy and density functional theory calculations suggest the electron transfer from WO2 to SnS2, creating an internal electric field (IEF) at the interfaces with a direction pointing from WO2 to SnS2. The IEF promotes spatial charge separation by driving photogenerated electrons in SnS2 to move to WO2, while photogenerated holes remain immobile. WO2 shows a strong affinity for oxygen-containing species and chemisorbs O2 and H2O molecules in a dissociative way, significantly reducing the kinetic barriers for the production of reactive oxygen species (•OH and •O2 –). Under visible light irradiation, the WS30 nanofibers exhibit enhanced photocatalytic degradation of HCHO and CH3COCH3, 4.8 and 7.2 times greater than that of pristine SnS2, respectively. The enhanced performance is attributed to the one-dimensional fibrous nanostructures, robust chemisorption of reactants, and IEF-driven charge separation. This work may inspire efforts to develop higher oxygen-affinity photocatalysts for photodegradation.

materials science, multidisciplinary,nanoscience & nanotechnology
Build-in electric field induced step-scheme TiO2/W18O49 heterojunction for enhanced photocatalytic activity under visible-light irradiation

Rui Wang,Jun Shen,Wenjing Zhang,Qinqin Liu,Mingyi Zhang,Zulfiqar,Hua Tang

DOI: https://doi.org/10.1016/j.ceramint.2019.08.226

IF: 5.532

2020-01-01

Ceramics International

Abstract:Artificial Z-scheme heterostructure photocatalysts, inspired by the natural photosynthesis, have been explored for water contamination owing to the efficiency of charge carriers separation and enhanced redox capacity. Herein, a novel step-scheme TiO2/W18O49 heterojunction integrating TiO2 nanosheets and spindle-like W18O49 was prepared via a two-step solvothermal method. The TiO2/W18O49 heterojunction with the optimum ratio exhibited excellent photodegradation of RhB higher by a factor of 2.26 and TC degradation higher by a factor of 3.32 than the pristine TiO2 when exposed to visible light. The reactive free radical trapping experiment indicated •O2 − was determined to the dominant reactive species. Furthermore, XPS analysis and •O2 − quantification measurements confirmed a build-in electric field induced step-scheme structure in TiO2/W18O49 composites, which effectively enhanced the separation of carriers, thus improved photocatalytic activity. The present study will offer a new perception related to the formation of step-scheme heterostructure for photocatalytic degradation.

materials science, ceramics
Synthesis of plasmonic W18O49 interconnected nanowire frameworks with strong photo-enhanced hydrogen evolution reaction activity

Ren-Hao Yang,Lu-Yu Chueh,Sheng-Lun Liao,Yung-Tin Pan

DOI: https://doi.org/10.1016/j.mtsust.2023.100485

IF: 7.244

2023-12-01

Materials Today Sustainability

Abstract:The synthesis of high-order tungsten oxide nanowire frameworks (NWFs) is achieved using an unordinary stable molecular precursor formed by mixing tungsten hexachloride with methanol. The solvothermally obtained NWFs are well characterized with diffraction, microscopy, and nitrogen adsorption techniques. Time-resolved absorption spectroscopy and proton activity measurements reveal the stability of tungsten precursors in methanol. In butanol, the precursor decomposes rapidly into solid hydrated tungsten oxide and leads to the formation of freestanding nanowires (FNWs) after the solvothermal treatment. The NWFs show a blue shift in their characteristic plasmonic absorption wavelength when compared with FNWs. Such phenomenon is attributed to the high population of connecting nodes, which are postulated to be the plasmonic hot spots where the light-induced electromagnetic fields are amplified. The photo-deposition of palladium nanoparticles was hence selectively formed on these connecting nodes on the NWFs while showing no apparent selectivity on the FNWs. Furthermore, when applied as an electrode catalyst for the hydrogen evolution reaction, the NWFs demonstrated a much stronger photo-induced enhancement compared with the FNWs. The photo-induced effects demonstrate the advantage of plasmonic field enhancement through connected nanowires which can be obtained through a facile synthesis process.

materials science, multidisciplinary,green & sustainable science & technology
A Heterostructured WO3–SnO2 Nanocomposite for the Efficient Photocatalytic Production of H2O2 under Visible Light

Diya Xie,Chen,Yaru Wang,Cheng Sun,Yiming Xu,Jianguo Huang

DOI: https://doi.org/10.1039/d4ta01223b

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:A WO3–SnO2 (WSN) nanocomposite was synthesized with unique heterostructures formed in-between the two phases, resulting in the efficient production of H2O2 under visible light due to the synergistic effect.
Efficient and Controllable Flame Method to Generate Rich Oxygen Vacancies in WO3 Nanosheet Arrays to Enhance Solar Water Oxidation

Biyi Chen,Dan Li,Xue Chen,Longhua Li,Min Chen,Weidong Shi

DOI: https://doi.org/10.1063/5.0097487

IF: 4

2022-01-01

Applied Physics Letters

Abstract:A WO3 photoanode is a promising candidate for photoelectrochemical (PEC) water splitting due to its earth-abundance, highly tunable composition, excellent stability, and electrical conductivity. However, its actual PEC performances are inferior to theoretical values, which are challenged by rapid recombination of photogenerated carriers and sluggish water oxidation kinetics. Here, a flame method that has the advantages of being simplistic, controllable, and ultra-efficient is reported to generate a rich oxygen vacancy (OV) in WO3 nanosheet arrays to enhance the PEC performance. The morphology, crystallinity, and PEC performance of the WO3 nanosheet arrays were significantly sensitive to the process parameters. By optimizing the process, rich surface OVs were introduced in the WO3 photoanode within 30 s, while the overall morphology, crystallinity, and conductive substrate were well preserved. The optimum deficient WO3 photoanode exhibited a photocurrent density of 2.40 mA cm−2, which is 3.33 times as high as that of the untreated counterpart. The OVs significantly improved the PEC performance of the WO3 photoanode by enhanced carrier transports and stronger activation for OH− ions. Moreover, the proposed flame method exhibits great versatility in prevalent metal oxides for introducing OVs.
Controllable Synthesis of Hexagonal WO3 Nanoplates for Efficient Visible-Light-Driven Photocatalytic Oxygen Production.

Yu Lei Wang,Y. Li,Lining Fang,H. Yang,A. Chen,Xue Lu Wang,X. Du,Junting Zhao

DOI: https://doi.org/10.1002/asia.201601471

2017-02-16

Chemistry - An Asian Journal

Abstract:Facilitating charge-carrier separation and transfer is fundamentally important to improve the photocatalytic performance of semiconductor materials. Herein, two-dimensional hexagonal WO3 nanoplates were synthesized by a two-step route: rapid evaporation and solid-phase sintering. The as-prepared WO3 exhibits an enhanced activity of photocatalytic water oxidation compared to bulk monoclinic WO3 . The electron dynamics analysis reveals that a more efficient charge-carrier separation in the former can be obtained, the origin of which can be attributed to an increased number of surface defects in hexagonal WO3 nanoplates. This work not only presents a novel and simple method to produce two-dimensional hexagonal WO3 nanoplates, but also demonstrates that surface defects and two-dimensional geometric structures can promote the charge separation, which may be extended to the design of other efficient photocatalysts.

Chemistry,Medicine,Materials Science
Synthesis and photocatalytic properties of β-NaY(Gd)F4:Yb3+,Er3+@W18O49 nanocomposites

Wei Zhang,Lizhong Qin,Xiaohui Qi,Liyan Na,Ruinian Hua

DOI: https://doi.org/10.1007/s10854-024-13565-6

2024-10-01

Journal of Materials Science Materials in Electronics

Abstract:Photocatalytic hydrogen evolution on specific semiconductor material has been the most promising method to meet the future energy demands. To increase the efficiency of the photocatalysis, the β -NaY(Gd)F 4 :Yb 3+ ,Er 3+ @W 18 O 49 nanocomposites were successfully synthesized by a two-step hydrothermal method. It can be observed that the as-prepared nanocomposites have a layered structure; the inner layer is hexagonal-phase β -NaY(Gd)F 4 :Yb 3+ ,Er 3+ nanorods, and the outer layer is W 18 O 49 nanowires (NWs). Compared to the W 18 O 49 samples, the nanocomposites show 160% increase in hydrogen production efficiency in a BH 3 NH 3 aqueous solution under 980 nm irradiation. The enhanced photocatalytic activity of the nanocomposites can be attributed to their particular hierarchical structure. The effect of localized surface plasmon resonance (LSPR) on the surface of the W 18 O 49 NWs and the upconversion luminescence of nanorods in inner layer can be simultaneously triggered at 980 nm. Subsequently, the luminescence of the nanorods can be partially absorbed by the W 18 O 49 NWs to re-excite the LSPR oscillation of the nanocomposite. The reexcited LSPR effect improves the photocatalytic efficiency of the nanocomposite.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Pt on Atomic-Layered WO 3 Islands: Electronic Tuning of Platinum-Tungsten Heterostructures for Highly Efficient Low-Temperature VOC Combustion

Jiangwei Ni,Zhiwei Huang,Mingshuo Tian,Wen Chen,Qiqi Zhou,Juanjuan Gong,Xinlong Liao,Junhong Chen,Shuangning Gan,Jia Chen,Xiaomin Wu,Huazhen Shen,Huawang Zhao,Guohua Jing

DOI: https://doi.org/10.1021/acs.est.4c00123

IF: 11.4

2024-04-14

Environmental Science & Technology

Abstract:Adjusting the electronic state of noble metal catalysts on a nanoscale is crucial for optimizing the performance of nanocatalysts in many important environmental catalytic reactions, particularly in volatile organic compound (VOC) combustion. This study reports a novel strategy for optimizing Pt catalysts by modifying their electronic structure to enhance the electron density of Pt. The research illustrates the optimal 0.2Pt-0.3W/Fe(2)O(3) heterostructure with atomic-thick WO(3) layers as a...

environmental sciences,engineering, environmental
A heterostructured WO 3 –SnO 2 nanocomposite for the efficient photocatalytic production of H 2 O 2 under visible light

Diya Xie,Chen Chen,Yaru Wang,Cheng Sun,Yiming Xu,Jianguo Huang

DOI: https://doi.org/10.1039/d4ta01223b

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:A WO 3 –SnO 2 (WSN) nanocomposite was synthesized with unique heterostructures formed in-between the two phases, resulting in the efficient production of H 2 O 2 under visible light due to the synergistic effect.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Unique insights into photocatalytic VOCs oxidation over WO3/carbon dots nanohybrids assisted by water activation and electron transfer at interfaces

Guimei Huang,Lijun Liu,Lv Chen,Lingfeng Gao,Junjiang Zhu,Hongbo Fu

DOI: https://doi.org/10.1016/j.jhazmat.2021.127134

2022-02-05

Abstract:Internal electric field (IEF) at heterojunction interfaces can separate photoexcited charge carriers and promote photocatalytic performance. Here we have modified WO3 nanoplates with carbon dots (CDs) and constructed an interfacial IEF directing from CDs to WO3 with assistance of their remarkably different work functions. Such electric field drove photoexcited electrons to transport towards CDs and retained photoexcited holes to stay at WO3, achieving electron/hole spatial separation. H2O preferred chemisorption on the five-coordinated W atoms of WO3 with an elongated H-O bond and bent H-O-H angle, which allowed the activation of H2O and favorable production of ·OH radicals. The WO3/CDs (WC1) showed a superior photocatalytic activity for visible-light photooxidation of HCHO and CH3COCH3 with CO2 production rate of 411 and 188 μmol g-1 h-1, respectively, outperforming most of WO3-based photocatalysts. The enhanced photocatalytic performance correlated with the IEF-induced charge separation, favorable ·OH production and VOCs chemisorption. Our work confirms the role of CDs cocatalyst in the photocatalytic oxidation of VOCs, which will inspire enthusiasm to develop more advanced heterojunction photocatalysts involving carbon nanomaterials.

Combustion Synthesis and Excellent Photocatalytic Degradation Properties of W18O49

Simple Approaches To Quality Large-Scale Tungsten Oxide Nanoneedles

Electrocatalysis: Reduced Mesoporous Co3O4 Nanowires as Efficient Water Oxidation Electrocatalysts and Supercapacitor Electrodes (Adv. Energy Mater. 16/2014)

P2&amp;#x2013;17: the Study of W&lt;inf&gt;18&lt;/inf&gt;O&lt;inf&gt;49&lt;/inf&gt; Nanoneedle Emitters

Solution combustion synthesis of ternary Ni/WC/C composites with efficient electrocatalytic oxygen reduction performance

Synthesis of Fe-doped WO3 Nanostructures with High Visible-Light-driven Photocatalytic Activities

Ultrahigh-efficiency photocatalysts based on mesoporous Pt-WO3 nanohybrids.

A Dissolution‐Regeneration Route to Synthesize Blue Tungsten Oxide Flowers and their Applications in Photocatalysis and Gas Sensing

Electronic state tuning over Mo-doped W18O49 ultrathin nanowires with enhanced molecular oxygen activation for desulfurization

Metallic WO2-decorated g-C3N4 nanosheets as noble-metal-free photocatalysts for efficient photocatalysis

Dual defects and build-in electric field mediated direct Z-scheme W18O49/g-C3N4-x heterojunction for photocatalytic NO removal and organic pollutant degradation

Photocatalytic Degradation of Volatile Organic Compounds over WO 2 /SnS 2 Nanofibers

Build-in electric field induced step-scheme TiO2/W18O49 heterojunction for enhanced photocatalytic activity under visible-light irradiation

Synthesis of plasmonic W18O49 interconnected nanowire frameworks with strong photo-enhanced hydrogen evolution reaction activity

A Heterostructured WO3–SnO2 Nanocomposite for the Efficient Photocatalytic Production of H2O2 under Visible Light

Efficient and Controllable Flame Method to Generate Rich Oxygen Vacancies in WO3 Nanosheet Arrays to Enhance Solar Water Oxidation

Controllable Synthesis of Hexagonal WO3 Nanoplates for Efficient Visible-Light-Driven Photocatalytic Oxygen Production.

Synthesis and photocatalytic properties of β-NaY(Gd)F4:Yb3+,Er3+@W18O49 nanocomposites

Pt on Atomic-Layered WO 3 Islands: Electronic Tuning of Platinum-Tungsten Heterostructures for Highly Efficient Low-Temperature VOC Combustion

A heterostructured WO 3 –SnO 2 nanocomposite for the efficient photocatalytic production of H 2 O 2 under visible light

Unique insights into photocatalytic VOCs oxidation over WO3/carbon dots nanohybrids assisted by water activation and electron transfer at interfaces

P2–17: the Study of W<inf>18</inf>O<inf>49</inf> Nanoneedle Emitters