Abstract:Piezoelectric Zinc Oxide (ZnO) nanogenerators (NGs) have been fabricated for low frequency (<100 Hz) energy harvesting applications. Different types of NGs based on ZnO nanostructures have been carefully developed, and studied for testing under different kinds of low frequency mechanical deformations. Well aligned ZnO nanowires (NWs) possessing high piezoelectric coefficient were synthesized on flexible substrates using the low temperature hydrothermal route. These ZnO NWs were then used in different configurations to demonstrate different low frequency energy harvesting devices. Using piezoelectric ZnO NWs, we started with the fabrication of a sandwiched NG for a handwriting enabled energy harvesting device based on a thin silver layer coated paper substrate. Such device configurations can be used for the development of electronic programmable smart paper. Further, we developed this NG to work as a triggered sensor for a wireless system using footstep pressure. These studies demonstrate the feasibility of using a ZnO NWs piezoelectric NG as a low-frequency self- powered sensor, with potential applications in wireless sensor networks. After that, we investigated and fabricated a sensor on a PEDOT: PSS plastic substrate using a one-sided growth and double-sided growth technique. For the first growth technique, the fabricated NG has been used as a sensor for an acceleration system; while the fabricated NG by the second technique works as an anisotropic direction sensor. This fabricated configuration showed stability for sensing and can be used in surveillance, security, and auto-Mobil applications. In addition to that, we investigated the fabrication of a sandwiched NG on plastic substrates. Finally, we demonstrated that doping ZnO NWs with extrinsic elements (such as Ag) will lead to the reduction of the piezoelectric effect due to the loss of crystal symmetry. A brief summary into future opportunities and challenges is also presented.

Low-Frequency Flexible Piezoelectric Nanogenerators Based on Zno Nanorods Grown on Cu Wires

Piezoelectric Nanogenerator Based on a Flexible Carbon-Fiber/zno–znse Bilayer Structure Wire

Flexible Piezoelectric Nanogenerators Based on ZnO Nanorods Grown on Common Paper Substrates

A Self-Supported Structure Hybrid Triboelectric/piezoelectric Nanogenerator for Bio-Mechanical Energy Harvesting and Pressure Sensing

Flexible piezoelectric nanogenerator based on Cu2O–ZnO p–n junction for energy harvesting

Zno-Nanowires Based Power Generation from Low Frequency Vibration

Power Generation with Laterally Packaged Piezoelectric Fine Wires

A Low Frequency Vibration Energy Harvester Using ZnO Nanowires on Elastic Interdigitated Electrodes

Nanowire Piezoelectric Nanogenerators on Plastic Substrates As Flexible Power Sources for Nanodevices

A vibration-driven nanogenerator fabricated on common paper substrate for harvesting energy from environment

Zinc oxide piezoelectric nano-generators for low frequency applications

Modeling and Experimental Study of a Low-Frequency-Vibration-Based Power Generator Using ZnO Nanowire Arrays

Self-powered nanowire devices

P–N junction-based ZnO wearable textile nanogenerator for biomechanical energy harvesting

Fabrication of flexible nanogenerator with enhanced performance based on p-CuO/n-ZnO heterostructure

Patterned Growth Of Zno Nanowires On Flexible Substrates For Enhanced Performance Of Flexible Piezoelectric Nanogenerators

Flexible Porous PDMS/PZT-based Nanogenerator Enabled by Dual Effect of Ferroelectricity and Piezoelectricity.

Lateral Nanowire/nanobelt Based Nanogenerators, Piezotronics and Piezo-Phototronics

Nanoscale Mechanical Energy Harvesting Using Piezoelectricity and Flexoelectricity

Recent Progress in Piezoelectric Nanogenerators As a Sustainable Power Source in Self-Powered Systems and Active Sensors

Piezoelectric Nanogenerator Based On Zno Nanomaterials