Abstract:The development of a simple and feasible process for preparing adsorbent materials to recover phosphorus resources would have significant environmental and social benefits. In this study, the Al-modified hydrochar was synthesized for phosphate adsorption by hydrothermal carbonization in one pot using corn stover as raw material. The results showed that phosphate adsorption mainly depended on the precipitation reaction between Al element and phosphate, in which the hydrochar carrier played a synergistic role. Al element through the hydrothermal treatment loaded on hydrochar expressed a much higher phosphate adsorption performance than that on pyrochar. When the concentration of AlCl3 solution added in the hydrothermal process was 2 mol center dot L-1 and the hydrothermal temperature exceeded 180 celcius, Al element could transform from the amorphous state, which was less effective for phosphate adsorption, to Al24O11(OH)(44)Cl-6 crystal with high adsorption performance and could be more stably loaded onto the hydrochar. Although the preparation process was simple, the adsorption performance of hydrochar is good. The phosphate adsorption capacity and removal efficiency by the hydrochar prepared at 260 degrees C reached to 114.40 mg center dot g(-1) and 76.27%, which could be further increased by adjusting the dosage of adsorbent and pH of water. The pseudo-second-order kinetic model and Langmuir isotherm model could better describe the phosphate adsorption process on Al-loaded hydrochar. Phosphate was rapidly adsorbed on the surface of the hydrochar rich in mesoporous structure and bound to the surface-active sites. This study could transform agricultural waste into a functional hydrochar-based adsorbent and provide a low-cost, simple operation and efficient phosphate removal technology.

Removal of phosphate from etching wastewater by calcined alkaline residue: Batch and column studies

Alkali-Treated Yttrium-Containing Chitosan-Based Hydrogel Beads for Phosphate Removal from Aqueous Solutions

Alkali-treated Yttrium-Containing Chitosan-Based Hydrogels for Phosphate Recover with Highly Selective in Wide Ph Aqueous Solution

Removal of Phosphate from Wastewater Using Alkaline Residue

Synthesis of Al-Modified Hydrochar from Corn Stover for Efficient Phosphate Removal

Mechanisms Of Phosphorus Removal From Wastewater By Ion Exchange Resin

Phosphate Removal from Wastewater Using Aluminium Oxide As Adsorbent

Efficient Removal of Phosphate through Adsorption by Acidified Diatomite Loaded with La2O2CO3

Study on an Effective Industrial Waste-Based Adsorbent for the Adsorptive Removal of Phosphorus from Wastewater: Equilibrium and Kinetics Studies.

Phosphate removal from aqueous solutions by adsorption using ferric sludge

Adsorption of phosphate from aqueous solution using electrochemically modified biochar calcium-alginate beads: Batch and fixed-bed column performance

Removal of Phosphorus from Wastewater by Different Morphological Alumina

Equilibrium and Kinetics Studies of Phosphate Removal from Solution Onto a Hydrothermally Modified Al-Si-Fe-Ca Composite Adsorbent

Removal of Phosphate from Water Using Raw and Activated Laterite: Batch and Column Studies

Effective adsorption of phosphate using a Mg–Al–La composite from synthetic/real wastewater: adsorptive behaviour, column tests and economic evaluation

Phosphorus removal from wastewaters: Experimental and theoretical support for alternative mechanisms

Enhanced phosphate pollutant removal from liquid via adsorption flotation strategy: Synergic effect of Fe(III)-fulvic acid carrier and CTAB

Removal of Phosphate from Wastewater by Lanthanum Modified Bio-Ceramisite

Removal of phosphorus from wastewaters by absorption using aged refuse

Phosphate Removal Using Free-Standing Functionalized Mesoporous Silica Films with Excellent Recyclability

Enhanced Adsorption Capacity for Phosphate in Wastewater from Thermally Activated Flue Gas Desulfurization Gypsum