Abstract:Chemical vapor deposition (CVD) diamond grinding wheels are used in precision and ultra-precision grinding owing to the high grain density, uniform dispersion of abrasives, and excellent wear resistance. However, the small chip space on the CVD diamond abrasive surface easily interrupts the grinding, which limits the practical applications of these wheels. In this paper, a novel micro-structured CVD diamond wheel was presented for precision grinding of optical glass, to improve the grinding performance. First, continuous and clear micro grooves of 4–6 µm width and 8 µm depth were ablated on the surface of a CVD diamond by a pulsed laser. Different from the conventional structured wheels, the grain size of the CVD diamond was refined from 10 to 20 µm to 5–15 µm by laser micro-structuring. Second, the effect of the micro-structures on the grinding force, force ratio, and ground quality were investigated for optical glass. The normal forces decreased by 48–65%, whereas the tangential force dropped by 25–54%. The normal-to-tangential grinding ratio also clearly reduced owing to the increasing abrasive edges and change in the rake angle of most grains. The measurement results of the ground surface showed that roughness R a decreased by 5–20% and subsurface damage depth reduced by approximately 25%. In addition, the wear morphology exhibited that abrasion flattening occurred not only on the CVD diamond grain tips but also on the side edges of the micro grooves. This implied that the micro-structures effectively participated in the grinding process, and thus, resulted in an increase in the grain density and enhancement of the cutting effort.

Ultra-precision grinding of optical glasses using mono-layer nickel electroplated coarse-grained diamond wheels. Part 1: ELID assisted precision conditioning of grinding wheels

ELID Assisted Precision Conditioning of Coarse-Grained Diamond Grinding Wheel

Ultraprecision Ductile Grinding of Optical Glass Using Super Abrasive Diamond Wheel

Ultra-precision Ductile Grinding of BK7 Using Super Abrasive Diamond Wheel

ELID Assisted Grinding of Optical Glass with Fine and Coarse Grained Copper-Resin Bonded Diamond Wheels

Preparation of surface micro-structured coarse-grained diamond wheels based on high efficiency mechanical conditioning and picosecond pulsed laser machining

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

Ultra-precision Machining of Hard and Brittle Materials with Coarse-Grained Grinding Wheels

Application of ELID Grinding Technique to Precision Machining of Optics

Studies on the Surface Quality of the Unsteady-State Grinding Technique

One-Point Nano-Grinding for Micro-Aspherical Glass Lens Mould

Ultraprecision finishing process integrated ELID grinding and MRF for BK glass

Fabrication of Diamond Micro Tool Array (DMTA) for Ultra-Precision Machining of Brittle Materials

The FEM Simulation of Ultra-precision Grinding of Optical Glass with Micro-structured Coarse-Grained Diamond Wheels

Ultra-precision raster grinding of monocrystalline silicon biconical free-form optics using arc-shaped diamond grinding wheels

Grinding damage of BK7 using copper-resin bond coarse-grained diamond wheel

Improvement of precision grinding performance of CVD diamond wheels by micro-structured surfaces

High Efficiency Precision Grinding of Micro-structured SiC Surface Using Laser Micro-structured Coarse-Grain Diamond Grinding Wheel

Surface and Sub-Surface Integrity of Ultra-Machined Bk7 Using Fine and Coarse Grained Diamond Wheels

Study on the Resin Bond Diamond Grinding Wheel Used for Ultra-Precision Back Grinding Silicon Wafer

Inclined Axis Ultra-Precision Grinding for Spherical Surface