Abstract:Magnetic invisible cloaking has been previously demonstrated but only limited to objects with rotational geometries either in spherical or cylindrical shapes, for which the classic analytical bilayer scheme could be strictly applied to design the hiding coat. In this work, we show that a quasi-static cloaking effect could be achieved for irregular objects, e.g., metals with sharp edges, using a numerical optimization scheme. In the quasi-static limit, it is unambiguously proved that the disturbance of the irregular geometries could be well compensated by the inhomogeneous distribution of the soft ferromagnetic (FM) layer either in permeability values or in shapes under the framework of a bilayer cloak. An FM mesh coat with a constant thickness of 0.5 mm was successfully engineered to meet the specific requirements. Experimentally, good cloaking performance with a field disturbance of less than 0.5% has been achieved for a 2 × 2 × 5 cm3 brass bar in a wide frequency range from ∼10 to 250 kHz. A commercial metal scanner was also applied to verify the practical potential. The general strategy to hide almost arbitrary objects was discussed in the end. In principle, the numerical conformal coat engineered by the composite material proposed here could be broadly extended for objects with various geometries.

Response of a Cylindrical Invisibility Cloak to Electromagnetic Waves

A Rigorous Analysis of Plane-Transformed Invisibility Cloaks

Research on electromagnetic dispersion characteristics of cylindrical invisibility cloaking for missile

Experimentally Demonstrated A Unidirectional Electromagnetic Cloak Designed by Topology Optimization

Time Domain Study of Electromagnetic Cloaks for Wideband Invisibility under Transient Illumination

Ultrathin Conformal Magnetic Invisible Cloak for Irregular Objects.

Response of Dispersive Cylindrical Cloaks to A Nonmonochromatic Plane Wave

A Multi-Cloak Bifunctional Device

The Scattering of a Cylindrical Invisibility Cloak: Reduced Parameters and Optimization

Extraordinary surface voltage effect in the invisibility cloak with an active device inside

Full-wave Analysis of Prolate Spheroidal and Hyperboloidal Cloaks

Fourier Metasurface Cloaking: Unidirectional Cloaking of Electrically Large Cylinder under Oblique Incidence.

Confirmation of Cylindrical Perfect Invisibility Cloak Using Fourier-Bessel Analysis

Cylindrical Invisibility Cloak With Simplified Material Parameters Is Inherently Visible

Ideal cylindrical cloak and influence of tiny perturbation

Interaction of an Electromagnetic Wave with A Cone-Shaped Invisibility Cloak and Polarization Rotator

Transient Response of a Signal Through a Dispersive Invisibility Cloak.

Optical Force on a Cylindrical Cloak under Arbitrary Wave Illumination

Coordinate Transformations Make Perfect Invisibility Cloaks with Arbitrary Shape

Electrostatic Field Invisibility Cloak

No Maxwell Electromagnetic Wave Field Excited In Cloaked Concealment