Abstract:In this work, a novel internal heat absorption technology using inorganic material rods is employed during the solidification process of steel ingots, aiming to control their solidification and improve the quality of the final product. The study investigates the effect of the insertion depth of inorganic materials on the solidification microstructure and macrosegregation of 2.5-ton 42CrMo ingots. The mechanical properties of samples from the product are also tested. A numerical simulation model for casting 2.5-ton ingots is established and implemented in Ansys Fluent fluid simulation software, with inorganic material rods set at different preset depths. The simulation explores the physical processes of the melting and floating of inorganic materials in molten steel, as well as their effects on the temperature and flow fields of the material. The results show that deeper insertion of inorganic materials (200 mm from the hot top) reduces the tendency for macrosegregation compared to that at the insertion depth of 100 mm. Specifically, the positive segregation area decreases by 10.35%, while the negative segregation area decreases by 15.32%. Moreover, deeper insertion results in a significant refinement of the solidification microstructure, ultimately enhancing the mechanical properties of the products machined from the ingots (i.e., the yield strength increased by 4.7%). The numerical simulation results indicate that as the placement depth of inorganic materials in the ingot mold increases, the cooling effect becomes more significant, the flow area of molten steel initiated by the inorganic materials expands, and the linear velocity of the double-circle flow increases. This further explains why the solidification quality of the ingots improves with the increasing placement depth of inorganic materials.

Homogenisation of 20simn2mov Steel Ingots: Thermodynamic/kinetic Simulation and Experimental Validation

Homogenization of 30CrMnSi steel ingots: thermodynamic/kinetic simulation and experimental validation

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Simulation of Temperature Field and Microstructure in Heavy Steel Ingots Solidification

Three-dimensional simulation of thermosolutal convection and macrosegregation in steel ingots

Numerical Simulation of Macrosegregation in a 535 Tons Steel Ingot with a Multicomponent-Multiphase Model

Numerical simulation of macro-segregation in steel ingot during solidification

Three-Dimensional Simulation of Macrosegregation in a 36-Ton Steel Ingot Using a Multicomponent Multiphase Model

Numerical Simulation of Macrosegregation in Steel Ingots Using A Two-Phase Model

Numerical Simulation of Macrosegregation in Cast-steel Ingot

The Influence of Insertion Depth of Inorganic Materials on Solidification Microstructure and Segregation of 2.5-ton 42CrMo Ingot

Experimental Measurements for Numerical Simulation of Macrosegregation in a 36-Ton Steel Ingot

Numerical Simulation of Macrosegregation with Solid Deformation During the Solidification of Steel Ingots Using a Single-Phase/Two-Phase Integrated Model

Multiphase Modeling of Macrosegregation Formation in Steel Ingot

Microstructure Evolution and Homogenization Kinetics of 15Cr–30Ni–Fe Heat‐Resistant Alloy

Modeling Diffusion-Governed Solidification of Ternary Alloys – Part 2: Macroscopic Transport Phenomena and Macrosegregation

Simulation of macrosegregation due to melt convection and grain sedimentation in steel ingots using a mixture model

Numerical Simulation of Solidification and Macrosegregation in Water Cooled Heavy Steel Ingot

Computational Thermodynamics/kinetics Aided Design for the Microstructure of Pearlitic Steels During Cooling Process

Experimental and Numerical Study of Macrosegregation in a 160 Steel Ingot

The Optimized Homogenization Process of Cast 7Mo Super Austenitic Stainless Steel