Abstract:A key requirement by the European CCS directive for the safe operation of geological CO2 storage is the operator's responsibility to demonstrate containment of the injected CO2 and conformance between its actual and modelled behavior. Understanding the subsurface behavior and long-term fate of the injected CO2 requires the quantification of key reservoir parameters (e.g. pore pressure, CO2 saturation and strain in the overburden). Reliable quantification of these parameters and distinction between them pose a challenge for conventional monitoring techniques, which could be overcome by combining advanced multi-disciplinary and multi-method monitoring techniques in a joint inversion.Within the aCQurate project, we aim to develop a new technology for accurate CO2 monitoring using Quantitative joint inversion for large-scale on-shore and off-shore storage applications. In previous applications of joint inversion to CO2 monitoring, we successfully combined the strengths and advantages of different geophysical monitoring techniques (i.e. seismics with its high spatial resolution and geoelectrics with its high sensitivity to changes in CO2 saturation), using a cross-gradient approach to achieve structural similarity between the different models. While this structural joint inversion provides a robust link between models of different geophysical monitoring techniques, it lacks a quantitative calibration of the model parameters based on valid rock-physics models. This limitation is addressed by extending the previously developed structural joint inversion method into a hybrid structural-petrophysical joint inversion, which allows integration of cross-property relations, e.g. derived from well logs.The hybrid structural-petrophysical joint inversion integrates relevant geophysical monitoring techniques in a modular way, including seismic, electric and potential field methods (FWI, CSEM, ERT, MMR and gravity). It is implemented using a Bayes formulation, which allows proper weighting of the different models and data sets, as well as the relevant structural and petrophysical joint inversion constraints during the joint inversion.The hybrid joint inversion is designed for on-shore and off-shore CO2 storage applications and will be demonstrated using synthetic data from the CaMI Field Research Station (CaMI.FRS) in Canada. CaMI.FRS is operated by the Containment and Monitoring Institute (CaMI) of CMC Research Institutes, Inc., and provides an ideal platform for the development and deployment of advanced CO2 monitoring technologies. CO2 injection occurs at 300 m depth into the Basal Belly River sandstone formation, which is monitored using a large variety of geophysical and geochemical monitoring techniques. In preparation for the application to real monitoring data, we present the application of the joint inversion to synthetic full waveform inversion (FWI) and electrical resistivity tomography (ERT) data, derived for a geostatic model with dynamic fluid flow simulations.In addition to obtaining a better understanding of the subsurface behavior of the injected CO2 at CaMI.FRS, our goal is to mature the joint inversion technology further towards large-scale CO2 storage applications, e.g. on the Norwegian Continental Shelf.AcknowledgementsFunding is provided by the Norwegian CLIMIT program (project number 616067), Equinor ASA, CMC Research Institutes, Inc., University of Calgary, Lawrence Berkeley National Laboratory (LBNL), Institut national de la recherche scientifique (INRS), Quad Geometrics Norway AS and GFZ German Research Centre For Geosciences (GFZ).

Cross‐well seismic waveform tomography for monitoring CO2 injection: a case study from the Ketzin Site, Germany

Multi-Scale Seismic Measurements for Site Characterization and CO2 Monitoring in an Enhanced Oil Recovery/Carbon Capture, Utilization, and Sequestration Project, Farnsworth Field, Texas

Compressive time-lapse seismic monitoring of carbon storage and sequestration with the joint recovery model

Monitoring Injected CO2 Using Earthquake Waves Measured by Downhole Fibre-Optic Sensors: CO2CRC Otway Stage 3 Case Study

Feasibility of targeted active seismic monitoring of geological carbon storage using refracted waves

Quantitative CO2 monitoring at the CaMI Field Research Station (CaMI.FRS), Canada, using a hybrid structural-petrophysical joint inversion

Joint Monitoring of CO2-ECBM Based on Multiple Geophysical Methods: A Case Study of Shizhuang Town, Shanxi Province, China

Seismic detection of CO2 leakage along monitoring wellbores

Pore-scale characterization of carbon dioxide storage at immiscible and near-miscible conditions in altered-wettability reservoir rocks

3D seismic forward modeling from the multiphysical inversion at the Ketzin CO2 storage site

Robust CO 2 plume imaging by joint tomographic inversion using distributed pressure and temperature measurements

Monitoring Approaches for Detecting and Evaluating CO2 and Formation Water Leakages into Near-surface Aquifers

2D parallel simulation of seismic wave propagation in poroelastic media to monitor a CO2 geological sequestration process

Microtomographic quantification of hydraulic clay mineral displacement effects during a CO2 sequestration experiment with saline aquifer sandstone

Monitoring geological storage of CO2: a new approach

Robust CO2 Plume Imaging Using Joint Tomographic Inversion of Distributed Pressure and Temperature Measurements

Monitoring geological storage of CO2 using a new rock physics model

Investigations in Geologic Carbon Sequestration: Multiphase Flow of CO 2 and Water in Reservoir Rocks

Time-Lapse Full-Waveform Inversion Using Cross-Correlation-Based Dynamic Time Warping

Geophysical Monitoring Technologies for the Entire Life Cycle of CO2 Geological Sequestration

Geophysical monitoring technology for CO2 sequestration