Abstract:Asphalt concrete (AC) layers in asphalt pavements are heterogeneous, but they are generally deemed as homogeneous in engineering practice, which cannot realistically reflect the complex mechanical behavior of asphalt pavement, particularly at finer scales. To resolve this problem, the present study developed a random aggregate generation-based concurrent multiscale method to simulate the mechanical response of asphalt pavement using ABAQUS software. In this method, the mesoscopic structure of AC with a 60 cm length was simulated in the vicinity of tire loading by a random aggregate generation method and embedded into a macroscale pavement model. To account for the effects of pavement structure and environmental factors, three thicknesses of AC layer (10 cm, 15 cm and 20 cm), two types of pavement structures respectively with a cement-treated base (CTB) and a granular base (GB), and two pavement temperatures (5 and 35 degrees C) were adopted in the simulation. The maximum principal stress (MPS) values of fine aggregate matrix (FAM) within the region of interest were sorted and the values at the percentiles of 10%, 20%, ..., 90%, 100% were extracted. Besides, the number of the elements with top 1% MPS values were evaluated. Specific statistical analysis was performed on these values to investigate potential damage behavior of the AC layer. The results showed that the MPS at the percentile of 100% is at least three times that at the percentile of 90%, which indicates considerable stress concentrations at the narrow gaps between coarse aggregates. Top-down cracking could be the main cracking pattern for the CTB and GB pavement at low temperatures, and bottom-up cracking may be the main damage mode for the GB pavement at high temperatures. Increasing the thickness of the AC layer may effectively reduce the stress level at top of the AC layer for the CTB pavement at low temperatures.

Mechanical Behavior Analysis of Asphalt Mixture in Meso-Scale Considering Locally Effective Material

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Micromechanical Analysis on Asphalt Mixture Fatigue Damage Considering Volumetric Property

Microstructural Modeling of Rheological Mechanical Response for Asphalt Mixture Using an Image-Based Finite Element Approach

Characterizing Asphalt Mixtures with Random Aggregate Gradations Based on the Three‐dimensional Locally Homogeneous Model

Mechanical Analysis Model of Asphalt Concrete Random Particles Based on Mix Ratio

Investigation of Micro-mechanical Response of Asphalt Mixtures by a Three-dimensional Discrete Element Model

Comparison Of Mechanical Responses Of Asphalt Mixtures Under Uniform And Non-Uniform Loads Using Microscale Finite Element Simulation

Preliminary Study on Multi-Scale Modeling of Asphalt Materials: Evaluation of Material Behavior through an RVE-Based Approach

A Micromechanical Based Three-Dimensional DEM Approach to Characterize the Complex Modulus of Asphalt Mixtures

Micromechanical and microstructure analysis of asphalt concrete under triaxial load condition based on Discrete Element Method

Micromechanical analysis of damage evolution in splitting test of asphalt mixtures

Three-Dimensional Micromechanical Finite Element Analysis on Gauge Length Dependency of the Dynamic Modulus of Asphalt Mixtures

Development of Locally Homogeneous Finite Element Model for Simulating the Mesoscale Structure of Asphalt Mixture

Investigation of the Microstructural Fracture Behaviour of Asphalt Mixtures Using the Finite Element Method

Modified Two-Phase Micromechanical Model and Generalized Self-Consistent Model for Predicting Dynamic Modulus of Asphalt Concrete

Advances In Micromechanical Constitutive Theories And Modeling In Asphalt Mixture: A Review

Mesomechanical Modeling of Asphalt Concrete Considering Full Aggregate Size Range and Conjunctive Shell Mechanism of Interface Transition Zones

Mesoscopic Asphalt Pavement Response Analysis Using a Random Aggregate Generation-Based Concurrent Multiscale Method