Abstract:Iron-ore tailings (IOT) are mineral waste obtained via the iron-ore mining process. This has become a very critical issue in industrial solid waste management. The stacking of IOT occupies a large area and causes serious pollution, which can harm human life. This has become a serious matter of concern for society. IOT are usually rich in SiO2 and Al2O3 and can be used as raw materials in producing zeolitic materials. They have substantial benefits from both economic and environmental perspectives. However, few studies have been reported on the synthesis of zeolite or zeolite-like materials using IOT. As a type of zeolite, ZSM-5 has a regular pore structure and high thermal and hydrothermal stability and is widely used in catalytic materials. However, the application of ZSM-5 is greatly limited in many catalytic reactions owing to the large molecules associated with its inherently small pore sizes (<1.5 nm). Introduction of a hierarchically porous structure into conventional ZSM-5 maintains the crystal structure, acidic active center, and high thermal and hydrothermal stability and accelerates the diffusion/transfer of large molecules and greatly reduces the formation of carbon residue. This prolongs the service life of the catalyst used, which is extremely desirable in catalysis. In this study, hierarchically porous ZSM-5 was prepared via a two-step process using IOT as a silica source instead of pure chemical reagents. First, mesoporous MCM-41 was synthesized using cetyltrimethylammonium bromide as a mesoporous template. Then, hierarchically porous ZSM-5 was fabricated by impregnating a structure-directing agent into the as-synthesized MCM-41, followed by a solid-phase conversion method to transform amorphous silica into a zeolite crystal. To evaluate the textural properties of the zeolites, the as-synthesized samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption. The results show that phase separation between the surfactant and zeolite crystals is avoided because of the absence of the liquid-water phase during the solid-phase conversion. Therefore, the synthetic route presented herein provides a novel method for the synthesis of hierarchically porous ZSM-5 from IOT.

A Facile Approach to Synthesize Mcm-41 Mesoporous Materials from Iron Ore Tailing: Influence of the Synthesis Conditions on the Structural Properties

Non-hydrothermal synthesis and characterization of MCM-41 mesoporous materials from iron ore tailing

Utilization of iron tailings to prepare high-surface area mesoporous silica materials

A Novel Method for Synthesis of Mesoporous ZSM-5 from Iron Ore Tailings

Facile Synthesis of Mesoporous Silica Derived from Iron Ore Tailings for Efficient Adsorption of Methylene Blue

Synthesis and Characterization of Stable Framework-Iron Containing Mesoporous Molecular Sieves Fe-Mcm-41

Preparation of mesoporous Al-MCM-41 with stable tetrahedral aluminum using ionic liquids as a single template

Industrially compatible synthesis of MCM-41 with spatial organization at the macro-mesoscale

Comprehensive characterization of iron oxide containing mesoporous molecular sieve MCM-41

Preparation of MCM-41 with high thermal stability and complementary textural porosity

SYNTHESIS AND CHARACTERIZATION OF ORDERED MESOPOROUS MCM-41 FROM NATURAL CHLORITE AND ITS APPLICATION IN METHYLENE BLUE ADSORPTION

Synthesis of ZSM-5 Microspheres Made of Nanocrystals from Iron Ore Tailings by the Solid-Phase Conversion Method

Large Surface Area Mcm-41 Prepared from Acid Leaching Residue of Coal Gasification Slag

New routes for synthesizing mesoporous material

Advances in Synthesis of MCM-41 Molecular Sieves Using Kaolin as Raw Material

Preparation and Characterization of the Ceramsites with Microscale Pores from Iron Tailing and Fly Ash

Synthesis of Ti-MCM-41 Using Colloidal Silica and Titanium Trichloride II. Characterization of Ti-MCM-41 Molecular Sieve

Synthesis of a Hierarchical ZSM-5 Zeolite from Iron-Ore Tailings by a Two-Step Method

Ti-MCM-41 synthesized from colloidal silica and titanium trichloride: Synthesis, characterization, and catalysis

Synthesis of MCM-41 mesoporous molecular sieve based on recycled glass fibers from waste fan blades

Mesoporous zinc silicate composites derived from iron ore tailings for highly efficient dye removal: Structure and morphology evolution