Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

Four-Phase or Two-Phase Signal Plan? A Study on Four-Leg Intersection by Cellular Automaton Simulations

Q-learning Based Traffic Signal Control Method for an Isolated Intersection

Traffic Signal Control Optimization Strategy Based on Simulation

Influence of signal on the capacity of signalized intersection

TRAFFIC FLOW AT A SIGNAL CONTROLLED T-SHAPED INTERSECTION

Dynamic Phase Signal Control Method for Unstable Asymmetric Traffic Flow at Intersections

General Multi-Phase Intelligent Control Method for Traffic Flow at Single Intersection

Phase Diagrams on an Unsignalized Intersection for the Cases of Different Maximum Velocities of Vehicles

Minimum Cycle Length of Two-Phase Road Intersection

Analysis om waiting area for left-turn vehicles at signalized intersections

Traffic behavior of T-shaped intersection system under signal controlling compared with unsignalized model

Signal Coordination Algorithm Considering Vehicle Platoon Movement Characteristics on Arterial Streets

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

Modeling Capacity at Signalized Intersections with a Left-Turn Storage Bay Considering Signal Timing Plan

Emergence of Bistable States and Phase Diagrams of Traffic Flow at an Unsignalized Intersection

Analyze Correlations of Traffic Control Plans in Urban Road Networks

Research on the Optimal Method of Cycle Length for Signalized Intersection

Intersection Control Considering Channelized Section Spillback Using a Flexible Phase Plan

Signal Timing Method of Right——turn Vehicles Based on Mixed Traffic

Phase-based Rhythmic Control for Imbalanced Traffic Demands under a Connected and Automated Environment

Multi-phase fuzzy traffic control based on phase sequencer