Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

Polarization Manipulation in Single Refractive Prism Based Holography Lithography

Polarization manipulation holographic lithography by single refracting prism

Optimal Polarization Modulation for Orthogonal Two-Axis Lloyd’s Mirror Interference Lithography

Polarization Control by Using Anisotropic 3-D Chiral Structures

Intensity-based polarization manipulation by tunable polarization holographic grating

Polarization‐controlled surface plasmon holography

Arbitrary Polarization Conversion with a Photonic Crystal Slab

Freeform Liquid–Crystal Polarization Imaging Optics: A Practical Approach from Design to Fabrication

Polarization Effect on Optical Manipulation in a Three-Beam Optical Lattice

Transmissive and Efficient 90° Polarization Rotation with a Single-Layer Plasmonic Structure

Polarized Holographic Lithography System for High-Uniformity Microscale Patterning with Periodic Tunability.

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics

3D structured Bessel beam polarization and its application to imprint chiral optical properties in silica

Manipulating Optical Polarization by Stereo Plasmonic Structure

Polarization Switch Using Thick Holographic Polymer-Dispersed Liquid Crystal Grating

Plasmonic Route to Reconfigurable Polarization Optics

Encoding arbitrary phase profiles to 2D diffraction orders with controllable polarization states

Metasurface optics for on-demand polarization transformations along the optical path

Manipulation of Longitudinally Inhomogeneous Polarization States Empowered by All‐Silicon Metasurfaces

Polarization controlled colorful images reconstructed by reflective meta-hologram

Method for fabricating circular polarization beam splitters based on polarization holography.