Abstract:Yttria-stabilized zirconia (YSZ) based potentiometric gas sensors have been widely utilized for detecting NOx (NO and NO2). Nevertheless, it is still remains challenging issue for YSZ-based sensors to sense total NOx due to the opposite response signals to NO and NO2. Herein, we report an efficient strategy to sense total NOx at high temperature (above 300 °C) by designing a dual functional sensing electrode (SE); namely, the SE will simultaneously convert NO (in NOx mixture) to NO2 and electrocatalyze all of the obtained NO2 to generate the response signal of total NOx. In comparison with those previously reported total NOx sensors, the proposed total NOx sensor will be featured with a simplified sensor configuration and desirable long-term stability. To confirm the practicability of the proposed strategy, the NO conversion rate of several metal oxides and their composites have been measured and it turns out that the Co3O4/NiO shows relatively high NO conversion rate. Further study indicates a YSZ-based sensor consisting of (Co3O4 + 20 wt % NiO)-SE and Mn-based RE demonstrates satisfactory performance in detecting total NOx. For instance, analogous response magnitude to NO and NO2 as well as the mixture of NO/NO2 (within 35 ppm) is witnessed for the sensor; particularly, the sensor gives acceptable stability and response/recovery rate at the operating temperature of 500 °C within the examined period. In summary, the use of dual functional SE (e.g., Co3O4/NiO composite SE) indeed addressed those issues of concern in monitoring the level of total NOx and has provided a promising alternative way for designing future high-performance total NOx sensor.

Sensing mechanism of the zirconia-based highly selective NO sensor by using a plate-like Cr 2 O 3 sensing electrode

Plate-like Cr 2 O 3 for highly selective sensing of nitric oxide

Selective detection of NO using the perovskite-type oxide LaMO 3 (M = Cr, Mn, Fe, Co, and Ni) as the electrode material for yttrium-stabilized zirconia-based electrochemical sensors

Efficient nitric oxide sensing on nanostructured La2MMnO6 (M: Co, Cu, Zn) electrodes

A Planar, Impedancemetric NO2 Sensor Based on NiO Nanoparticles Sensing Electrode

Highly sensitive NO2 sensor based on mesoporous ZrO2–WO3 nanotubes composite

Porous SnO2 nanoplates for highly sensitive NO detection

ZIF-derived Nanoparticles Modified ZnO Nanorods Hierarchical Structure for Conductometric NO2 Gas Sensor

Hierarchically Porous Zno Derived from Zeolitic Imidazolate Frameworks for High-Sensitive Mems No2 Sensor

A Combined Experimental and Theoretical Study of Composite Sno2-Bivo4 for Selective No2 Sensing

NO<sub>2</sub> Gas Sensing Characters of Polycrystaline ZnO Nanorods

Mixed potential type sensor using stabilized zirconia and La 0.75Sr0.25Cr0.5Mn0.5O3 sensing electrode for NO2 detection

Conductometric NO2 Gas Sensors Based on MOF-derived Porous ZnO Nanoparticles

Mixed Potential Type Sensor Using Stabilized Zirconia and La<sub>0.75</sub>Sr<sub>0.25</sub>Cr<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>3</sub> Sensing Electrode for NO<sub>2</sub> Detection

Improvement on Mixed-Potential Type Ammonia Sensor by a Cr2O3 Gas-Phase Catalyst Layer

g-C3N4 templated synthesis of 3DOM SnO2/CN enriched with oxygen vacancies for superior NO2 gas sensing

Annealing Edge Sites of Porous SnO2 Nanoplates for Selective NO2 Sensing: a Combined Experimental and Theoretical Study

An ultrasensitive NO2 gas sensor based on a hierarchical Cu2O/CuO mesocrystal nanoflower

Ultra-high gas sensing properties of porous Cr2O3@SnO2 composite toward NOx based on the p-p heterostructure

Compact Yttria-Stabilized Zirconia Based Total NOx Sensor with a Dual Functional Co3O4/NiO Sensing Electrode

A novel impedancemetric NO2 sensor based on nano-structured La0.75Sr0.25Cr0.5Mn0.5O 3-δ prepared by impregnating method