Abstract:Plasma facing components (PFCs) in the next generation of tokamak devices will operate in challenging environments, with heat loads predicted to exceed 10 MWm$^{-2}$. The magnitude of these heat loads is set by the width of the channel, the "scrape-off layer" (SOL), into which heat is exhausted, and can be characterised by an e-folding length scale for the decay of heat flux across the channel. It is expected this channel will narrow as tokamaks move towards reactor relevant conditions. Understanding the processes involved in setting the SOL heat flux width is imperative to be able to predict the heat loads PFCs must handle in future devices. Measurements of the SOL width are performed on the high-field spherical tokamak, ST40, using a newly commissioned infrared thermography system. With its high on-axis toroidal magnetic field ($\geq$1.5 T) ST40 is uniquely positioned to investigate the influence of toroidal field on the heat flux width in spherical tokamaks, whilst also extending measurements of the SOL width in spherical tokamaks to increased poloidal field ($\geq$0.3 T). Due to the divertor on ST40 having a low degree of axisymmetry, it is necessary for a set of radial measurements of the heat flux to be taken across the divertor, made possible using an automated toolchain that fully incorporates its 3D geometry. These radial profiles are combined with the magnetic topology of the plasma to infer the width of the SOL, with both single and double exponential profiles of heat flux observed. A reduction in the heat flux is observed toroidally across part of the divertor, with preliminary investigations indicating that partial shadowing occurs, resulting from the separation between magnetic field lines and trailing edges upstream of the observed region becoming comparable to the ion gyro-radius.

Impact of E × B flow shear on turbulence and resulting power fall-off width in H-mode plasmas in experimental advanced superconducting tokamak

Overview of Experimental Results on the HL-2A Tokamak

Effect of Sheared E × B Flow on the Blob Dynamics in the Scrape-off Layer of HL-2A Tokamak

Effects of Heating Power on Divertor In-out Asymmetry and Scrape-off Layer Flow in Reversed Field on Experimental Advanced Superconducting Tokamak

Effect Of Edge Turbulent Transport On Scrape-Off Layer Width On Hl-2a Tokamak

Power Balance Investigation in Long-Pulse High-Performance Discharges with ITER-like Tungsten Divertor on EAST

Study of Electromagnetic Mode Contributing Inward Particle Pinch in the Scrape-off Layer During H-mode Discharge

Turbulence spreading effects on the ELM size and SOL width

Modelling of Edge Plasma Transport During H-Mode of East by Solps5.0

Modeling of Divertor Power Footprint Widths on EAST by SOLPS5.0/B2.5-Eirene

Impact of E × B shear flow on low-n MHD instabilities

Experimental Investigation on Effect of Ion Cyclotron Resonance Heating on Density Fluctuation in SOL at EAST

Statistical characterization of turbulence in the boundary plasma of EAST

The role of shear flow collapse and enhanced turbulence spreading in edge cooling approaching the density limit

Study of Power Width Scaling in Scrape-off Layer with 2D Electrostatic Turbulence Code Based on EAST L-mode Discharges

Effect of Heating Scheme on SOL Width in DIII-D and EAST

Effects of divertor baffling on SOL plasma during the high power operation

Scaling Trends of the Critical E × B Shear for Edge Harmonic Oscillation Onset in DIII-D Quiescent H-mode Plasmas

Experimental Scaling of Divertor Heat and Particle Flux Widths in East L-Mode Plasmas

Inferring the scrape-off layer heat flux width in a divertor with a low degree of axisymmetry

Progress Towards Modeling Tokamak Boundary Plasma Turbulence and Understanding Its Role in Setting Divertor Heat Flux Widths